Lutron LED+ Dimmer Quick Install Guide RCL-153PNL

Install with Confidence

Use included diagrams or visit our website for step-by-step instructions.

For video instructions, visit: lutron.com/CLwiring

To find the right LED, visit: lutron.com/LEDfinder

Important Notes:

Use only with permanently installed fixtures with dimmable screw-in compact fluorescent, dimmable screw-in LED, halogen, or incandescent lamps.
Do not use to control receptacles, motor-driven appliances, or transformer-supplied appliances to avoid overheating and damage to other equipment.
Install in accordance with all national and local electrical codes.
If no grounding means exists in the wallbox, a control can be installed as a replacement when a plastic faceplate with plastic fasteners is used, or the circuit is protected by a ground fault circuit interrupter (GFCI). Lutron wallplates meet this requirement. Cap or remove the green wire before screwing the control into the wallbox.
Protect the dimmer from dust and dirt when painting or spackling the wall.
It is normal for the dimmer to feel warm to the touch during operation.
Clean the dimmer with a soft damp cloth only. Do not use chemical cleaners.
For indoor use only.

Installation Instructions

Before installing: Remove the rotary knob and the light ring.

WARNING: ELECTRIC SHOCK HAZARD. May result in serious injury or death. Turn off power at circuit breaker or fuse before installing.

Step 1: Pull knob

[Pull hard]

Step 2: Remove ring

[Pinch sides and pull]

Wiring Diagrams

Single Pole (Lights switched from one location):

Wiring:

Connect the dimmer's black and red wires (interchangeable) to the load and line wires.
Connect the ground wire (bare or green) to the dimmer's green wire.
Use the blue connector for wire connections.

Note: Black and solid red wire on the dimmer are interchangeable.

3-Way (Lights switched from two locations):

IMPORTANT: Mark or tag the common wire (connected to the different colored screw) before removing the old switch.

Wiring:

Connect the dimmer's wires according to the diagram, ensuring the common wire is correctly identified.
Connect the ground wire (bare or green) to the dimmer's green wire.

Note: Only one dimmer can be used in a 3-way circuit.

Ganging and Derating: Derating is necessary if mounting two or more devices side by side. Refer to the chart for new wattage ratings. Derating is not necessary for LED/CFL loads.

Maximum Allowable Inc. / Hal. Wattage:

Configuration	Max Wattage
Single Gang (No side devices)	600 W
One side device removed	450 W
Two side devices removed	300 W

After Installation: Adjust Low-End Dimming Range for LEDs and CFLs

Push the shaft to turn lights ON and rotate counter-clockwise to adjust the low-end.
Move the adjustment lever up or down to adjust the low-end dimming range.
Push the shaft to turn lights OFF and ON to verify proper operation.

Note: It may be helpful to attach the knob for this step.

Mount Dimmer and Restore Power

1. Attach faceplate

[Attach faceplate]

2. Note the UP arrow

[Note UP arrow]

3. Push light ring on

[Push light ring]

4. Push knob on firmly

[Push knob firmly]

Troubleshooting and Support

For troubleshooting, please visit: www.lutron.com/support

For limited warranty information, visit: www.lutron.com/warranty or call 1.844.LUTRON1.

To receive an extended warranty, visit: www.lutron.com/CLregistration

Support: 1.844.LUTRON1 (USA / Canada) | +1.888.235.2910 (Mexico)

Lutron and LED+ are trademarks or registered trademarks of Lutron Electronics Co., Inc. The YouTube icon is a trademark of Google LLC.

	Lutron LED+ Dimmer RCL-153PNL Quick Install Guide This guide provides quick installation instructions for the Lutron RCL-153PNL LED+ Dimmer, covering single-pole and 3-way applications, wiring, adjustments, and important safety notes.
	Lutron AYCL153PWH Ariadni 150W LED 3-Way White Dimmer - Elliott Electric Supply Product specifications for the Lutron AYCL153PWH Ariadni 150W LED 3-Way White dimmer. Features include toggle switch, screw terminal connection, 120V, 150W LED/CFL capacity, 600W incandescent/halogen capacity, and indoor use. This dimmer offers reliable performance for various bulb types. Provided by Elliott Electric Supply.
	Lutron STCL-153P LED+ Dimmer Quick Install Guide A quick installation guide for the Lutron STCL-153P LED+ Dimmer, including wiring instructions for single-pole and 3-way applications, derating information, and low-end dimming adjustments.
	Lutron Caséta Wireless In-Wall Dimmer Quick-Start Guide A comprehensive quick-start guide for installing and using the Lutron Caséta Wireless In-Wall Dimmer (DS-6WCL). Includes step-by-step installation instructions, pairing with Pico remotes, using the Lutron app, troubleshooting tips, and technical specifications.
	Lutron Caséta Wireless In-Wall Dimmer PD-6WCL Quick Start Guide Quick start guide for installing and using the Lutron Caséta Wireless In-Wall Dimmer (Model PD-6WCL). Learn about setup, compatibility, controls, and troubleshooting.
	Caséta Wireless Plug-in Lamp Dimmer Quick-Start Guide Instructions for installing and using the Lutron Caséta Wireless plug-in lamp dimmer (PD-3PCL). Covers setup, pairing with Pico remotes, app integration via Smart Bridge, and troubleshooting.
	Lutron Caséta Wireless In-Wall Dimmer Quick-Start Guide & Installation Step-by-step instructions for installing and setting up the Lutron Caséta Wireless In-Wall Dimmer (PD-6WCL), including wiring, app pairing, and troubleshooting. Learn how to control your lights with smart devices.
	Lutron Caséta Wireless Quick-Start Guide: Installing the In-Wall Dimmer and Pico Remote Learn how to install and set up your Lutron Caséta Wireless in-wall dimmer and Pico remote control with this comprehensive quick-start guide. Covers single-pole installation, pairing, app integration, and troubleshooting.

Lutron LED+ Dimmer Quick Install Guide