Lutron Caséta Wireless Quick-Start Guide

Double Your Warranty

Love Caséta™ Wireless dimmers? Have ideas for making them better? Tell us what you think and we'll extend your warranty by 1 year. Visit www.casetawireless.com/register

Contents Supplied

• In-wall dimmer (PD-6WCL)
• Claro® wallplate (CW-1)
• Pico® remote control (PJ2-3BRL)
• Wire connectors (3)
• Screws (2)

Tools You'll Need

• Flat-head screwdriver
• Phillips-head screwdriver
• Pliers

Works With Energy Efficient Dimmable Light Bulbs

• LED: up to 150 W
• CFL: up to 150 W
• Halogen: up to 600 W
• Incandescent: up to 600 W

NOTE: You can mix and match dimmable LED and CFLs, as well as halogen and incandescent light bulbs, with Caséta™ Wireless dimmers. Dimmable LED and CFL light bulbs vary in their dimming performance. If you're using these bulbs and they flicker or turn off, please visit www.casetawireless.com/lowend for information on adjusting the dimmer for best bulb performance.

For a complete list of compatible dimmable LEDs and CFLs, please visit www.casetawireless.com/bulblist

Compatible light bulbs include:

• Cree® BA19-080270MF-12DE26-1U100, CR6-575L
• EcoSmart® ECS BR30 W27 FL 120, ECS 20 WW FL 50WE 120
• Feit® A19/OM/LED
• Philips® 9290002295
• Sylvania® LED12A19/DIM/O/827, LED21PAR38/DIM/P/930/FL30

Installing Your Dimmer

Installation for Lights with One Wall Switch (Single-Pole)

1. Turn power off at circuit breaker! ⚠️ WARNING: SHOCK HAZARD. May result in serious injury or death. Turn off power at circuit breaker or fuse before installing. A diagram shows a circuit breaker switch in the 'OFF' position.

2. Remove existing switch from wall. Diagrams show removing the wallplate and then pulling the switch out from the wallbox. Disconnect all three wires* from the switch.

3. Remove side sections (if necessary). Diagrams illustrate removing side sections from the dimmer. Note: Do not remove outside side sections on dimmers at the end of a gang. A dimmer in the middle may have all side sections removed. Each dimmer has inside side sections removed. A note explains that removing side sections reduces the dimmer's maximum wattage rating.

4. Connect the dimmer. Diagrams show wire connections: 1. Connect the bare copper (or green) "ground" wire from the wallbox to the green wire on the dimmer using a wire connector. 2. Connect either of the remaining wires from the wallbox to either of the remaining wires on the dimmer using a second wire connector. 3. Connect the remaining wire from the wall to the remaining wire on the dimmer using a third wire connector.

5. Mount the dimmer. A diagram shows the dimmer being secured into the wallbox using provided screws.

6. Attach the wallplate. Diagrams show attaching an adapter to the dimmer with screws and then snapping the wallplate into place. A note advises: "If you installed the dimmer next to other dimmers or switches, you'll need to install a wallplate with the correct size/number of openings to accommodate all the devices."

7. Turn power on at circuit breaker. A diagram shows a circuit breaker switch in the 'ON' position.

Important note: Some lights have one wall switch, while others have two or more wall switches (such as stair lights). This guide covers single-pole installation. If your light has more than one switch (called a 3-way), please visit www.casetawireless.com/3way for complete installation instructions and how-to videos.

*If your switch has more than 3 wires attached, see "Installing Caséta™ Wireless in a 3-way switch application" video at www.casetawireless.com/3way

Maximum Wattage Derating Chart

*For maximum wattage information when mixing light bulb types see www.casetawireless.com/ganging

Using Your Caséta™ Wireless Kit

With a Smartphone or Tablet (Bridge Required, Sold Separately)

The Caséta™ Wireless dimmer can be controlled from a smartphone when used with the Lutron Smart Bridge™. If you are using the dimmer and remote control with the Lutron Smart Bridge™, follow the instructions below. If you are using the dimmer and remote control with another manufacturer's bridge, please refer to that manufacturer's instructions for set-up.

1. Download the Lutron® app. Search for "Lutron Caseta" on Google Play or the App Store. Visit www.casetawireless.com/LutronApp

2. Launch the Lutron® app. The Lutron® app will walk you through setting up your devices.

3. Use the Lutron® app to complete ALL remaining steps:

   • Add devices (Pico® remotes, Dimmers, Shades)
   • Control three ways
   • Schedule your lights
   • Connect while away

Without a Smartphone or Tablet (Bridge Not Required)

Pairing the Dimmer and Pico® Remote Control

1. Press and hold "off" button on dimmer. Hold for 6 seconds until LEDs start blinking.

2. Press and hold "off" button on remote. Hold for 6 seconds until lights flash 3 times (x3).

Repeat steps to pair other Pico® remote controls.

Changing the Favorite Light Level on the Pico® Remote Control (Optional)

You can use the round "favorite" button on the Pico® remote control to recall a favorite light level. We've set it to 50%, but you can change it to any level you like.

1. Set desired light level on dimmer.

2. Press and hold "favorite" button on remote. Hold for 6 seconds until LEDs blink twice. New favorite level is now saved (x2).

Using Your Controls

Dimmer Controls

• On
• Brighter (with raised icon)
• Darker
• Off
• FASSTM (Front Accessible Service Switch)

Pico® Remote Control

• On
• Favorite ⭐
• Darker
• Off

Replacing Light Bulbs using FASST: Pull the FASSTM switch out on the in-wall dimmer to remove power at the light socket.

Important Notes

• For indoor use only.
• Operate between 32 °F (0 °C) and 104 °F (40 °C).

For advanced features, tips on how to use Caséta™ Wireless dimmers with CFLs and LEDs, the complete Caséta™ Wireless product line, and more, please visit www.casetawireless.com/features

Troubleshooting

Go to www.casetawireless.com/support for additional troubleshooting suggestions.

Device Ratings

• In-wall dimmer: PD-6WCL, 120 V~ 50/60 Hz
• Pico® remote control: PJ2-3BRL, 3 V 10 mA (1) CR2032 battery (included)

Warranty

For warranty information, please visit www.casetawireless.com/warranty