MakeID S1 Pro Label Printer User Manual
This document provides comprehensive instructions for the MakeID S1 Pro label printer.
Packaging List
- 1x Printer
- 1x User Manual (includes warranty card and product certificate)
- 1x Quick-Start Guide
- 1x Charging Cable
- 1x Ordinary White Label Roll (15mm*50mm)
User Instructions
1. Label Roll Installation
Note: This printer is designed exclusively for die-cut labels. Ensure you use official MakeID labels to prevent potential damage or abnormal printing.
- Step 1: Push the [Cover-Open button] to open the printer. Insert the label roll with the printable side facing down, following the direction shown in the diagram.
- Step 2: When using a new label roll, pull the transparent leading label out of the Label Exit. This leading label is unprintable.
- Step 3: Close the cover once the label roll is correctly placed. Tear off the transparent leading label before use.
2. APP Download
Scan the QR code provided to download the APP directly, or search for "MakeID-Life" on Google Play or the App Store.
[QR code for MakeID-Life APP download]
3. Button Initial Settings
Step 1: The printer is powered by a lithium battery. When the battery is sufficiently charged, press and hold the [Power button] for 2 seconds to turn on the printer and light up the screen.
Step 2: For first-time use, connect the printer to the APP to initialize the buttons. Follow these steps:
- a. Open the MakeID-Life APP on your phone and grant all requested permissions. These permissions are solely for searching and connecting to the printer and will not violate your privacy.
- b. After selecting the S1 Pro printer theme within the APP, search for the printer. Click on the discovered printer to connect. Important: Connect the printer via the APP, not through your phone's system Bluetooth settings.
- c. Set the [Date button] as instructed in the APP. Select your preferred calendar format and date. After successful setting, the default date will be the current day. You can choose dates up to 30 days before or after the current date by using the [Selection button].
- d. Set the [Kitchen button] as instructed in the APP. Then, click to finish the setting. You can then print labels directly by pressing the [Print button].
- e. Set the [Custom button] and the [Expiry Date button] as instructed in the APP. Click to finish the setting, allowing you to print labels by pressing the [Print button].
Step 3: Once all settings are successfully configured, you can print labels by clicking the [Print button].
4. Button Usage
Note: Buttons must be configured within the APP after the printer is connected to be usable.
Kitchen button, Custom button:
- 1st: Click the [Kitchen button] or the [Custom button].
- 2nd: Use the [Selection button] to select the desired text.
- 3rd: Click the [Print button] to print the label.
Date button:
- 1st: Click the [Date button].
- 2nd: Select the date, choosing from 30 days before or after the current date using the [Selection button]. The default is the current date.
- 3rd: Click the [Print button] to print the date label.
Expiry Date button:
- 1st: Click the [Expiry Date button].
- 2nd: Use the [Selection button] to select the preferred expiry date.
- 3rd: Click the [Print button] to print the expiry date label.
5. How to Use the APP
You can also edit text within the APP before printing after connecting the printer.
- Step 1: Ensure the printer is powered on and the label roll is correctly installed. Connect the printer to your phone via the APP.
- Step 2: Navigate to the label-editing page within the APP.
- Step 3: Click the [Text icon] to edit text, and the [Font/Resize icon] to change fonts or resize text.
- Step 4: Click the [Sticker/Icon icon] to insert stickers or icons.
- Step 5: Click the [Print button] to access the print preview page where you can set the number of copies.
- Step 6: After printing, carefully tear off the label from the label exit.
Caution: To prevent potential damage to the label or printer, do not attempt to tear off the label while the printer is operating.
Labeling and Charging
6. How to Stick the Label
Each label has an adhesive backing. Peel off the backing paper before applying it to any surface.
7. Charging Method
The printer is powered by a lithium battery and features a Type-C input port (5V=2A). Use the provided Type-C charging cable and a standard Type-C charging head. If the printer is not used for an extended period, charge it once every 3 months to maintain battery health and prevent degradation.
Printer Parameters
| Parameter | Specification |
|---|---|
| Printing Method | Thermal Printing |
| Printing Resolution | 203dpi |
| Supported Label Type | Die-cut Label |
| Label Tearing Method | Manually |
| Printing Width | 12mm |
| Compatible Label Width | 9-12mm wide; 7.4m long |
| Printer Size | 85.5mm*85.5mm*33mm |
| Package Size | 117mm*117mm*43mm |
| Battery Capacity | 3.7V/1450mAh |
| Battery Life | 90 days |
| Connection Method | Bluetooth connection/ Shortcut button panel operation |
Safety Notes
Your personal safety is paramount during the operation and maintenance of this product. This manual contains important warnings and precautions for safe usage. Please read and understand all safety information before operating the printer.
Do not attempt to repair or adjust the product yourself. If you encounter issues that cannot be resolved using the methods described in this manual, power off the product and contact MakeID support at jryx@jingjingfun.com.
Precautions
- Do not use the printer for any purpose other than those specified in this manual, as it may lead to accidents or product damage.
- Only MakeID official labels are compatible with this printer. Using other brands may damage the printhead and reduce its lifespan. Damage caused by using poor-quality labels is not covered by the warranty.
- Avoid touching the printhead to prevent damage from static electricity. If the printhead becomes dirty, clean it with anhydrous alcohol.
- Do not scratch the printhead with hard objects. Damage from improper maintenance or use is not covered by the warranty.
- Do not place foreign objects in the label exit slot, as this can damage the printer.
- Do not press or hit the printer, as this may cause component damage or malfunction.
- If the printer becomes soaked in water or is otherwise damaged, stop using it immediately.
- Keep the printer away from direct sunlight, rain, heaters, heat-generating devices, car dashboards, and areas with extremely high or low temperatures, high humidity, or dust. The standard operating temperature range is 5°C to 35°C.
- If there is a significant temperature difference between indoor and outdoor environments, allow the printer to acclimate to the indoor temperature for a period before use to prevent condensation.
- Avoid sticking labels on surfaces frequently touched by hands, as sweat and friction can cause printings to fade.
- Do not expose labels to chemical liquids such as hand sanitizers, laundry detergents, or alcohol for extended periods, as this may affect print preservation.
- Do not wipe labels with cleaning tools containing alcohol.
- Thermal inkless printing is a specialized technology. Printings may fade if used improperly. It is recommended to apply labels in dry, flat, and infrequently touched environments at room temperature.
- To prevent label jamming during multiple printings, remove and tear off the label at the exit after each printing task is completed.
- Do not disassemble the printer to avoid electric shock, mechanical injury, or damage to printer components and other accidents.
- Power off the printer immediately if it exhibits abnormalities like emitting smoke or odor to prevent burns.
- To prevent unexpected situations, do not force the cover open to remove the label roll while the printer is operating.
- Do not touch the printhead immediately after printing, as it remains hot and can cause burns.
- To protect the printhead, a precision component, and extend its life:
- a. Avoid printing more than 2 meters for any continuous printing session.
- b. Do not print more than a total of 20 meters per day.
- Due to the printhead's fragile nature, observe the following to prevent corrosion:
- a. Do not touch the printhead surface.
- b. Do not use carbon ribbons or thermal labels containing sodium, potassium, or chloride ions.
- c. Avoid contact between the printhead and any liquids or wet objects.
- d. Clean the printhead only with anhydrous alcohol.
Troubleshooting
| Description | Reasons and Troubleshooting |
|---|---|
| Printer unable to power on or shut-down occurs | Printer might be out of power. Please try again after recharging. |
| Printer not work or incomplete printing | Check if the label roll is correctly installed (refer to Label Roll Installation section). Labels may have run out; please change them. Ensure the cover is securely shut. |
| Blurred printing | Check if the printer is operating in low temperatures (ideal range: 5°C to 35°C). The printhead might be dirty; clean it with anhydrous alcohol. |
| MakeID-Life APP download failure | Ensure your phone is connected to the Internet. Scan the QR code or search for "MakeID-Life" on Google Play or the App Store to download. |
| Connection failure |
|
| Abnormal printing |
|
| Other issues | Please contact MakeID support at jryx@jingjingfun.com. |
Warranty Policy
Warranty Period
MakeID offers free limited liability repair or product replacement services for one year from the date of purchase for hardware failures, provided the product has been installed and used in accordance with the normal working conditions and methods specified in this user manual.
Kind Reminder
- Documents such as the user manual, guide card, and all cables (e.g., charging cable) that accompany the product are not covered by the warranty.
- Discounted or complimentary items included with the product are not covered by the warranty.
- For after-sale services related to quality or function issues within the warranty period, your order number, contact information, and full delivery address (including name and phone number) are required.
Ineligibility for the Warranty Service
Malfunctions or damage to this product falling under the following situations are not covered by the free warranty. Paid repair services may be offered:
- The product or its components are outside the warranty period.
- Failure to install and use the product in accordance with the manual.
- Repairs or disassembly performed by non-MakeID staff.
- Use of non-MakeID labels or unsupported print media.
- The operating environment does not conform to the conditions specified in the manual.
- Substandard packaging or transportation methods used by users during handling.
- Use of non-MakeID components.
- Malfunctions or damage due to force majeure events (e.g., earthquakes, fire).
- Other malfunctions or damage not caused by product quality issues.
This policy does not affect your statutory consumer rights.
FCC Compliance:
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
mailto:jryx@jingjingfun.com
