HOMCOM Gaming Chair
Model: IN240900182V01_GL
Part Numbers: 921-794V00, 921-794V70, 921-794V01
Safety Information
Intended Use
This product is intended for indoor use only, for work and study.
General Safety Precautions
- Ensure weight is evenly distributed to prevent tipping.
- Remove all parts from the box and verify contents before assembly.
- Keep feet on the floor and avoid pressing head on the headrest when reclining.
- Ensure fingers are safe and out of harm's way when adjusting the backrest.
- Do not pull the chair quickly or forcefully indoors.
- This chair is designed for sitting only; do not use as a base or ladder.
- Do not sit on the armrests.
- This chair is designed for one person at a time.
- Discontinue use immediately if parts are missing, damaged, or worn.
- Avoid direct sunlight to prevent plastic components from becoming brittle.
- Beware of crushing and cutting hazards during assembly.
- The manufacturer is not responsible for damages due to improper installation or weather.
Wheel Recommendations
- For carpet: rigid nylon wheels or wheels with gears.
- For hard flooring: PU wheels or rubber wheels (avoid metal wheels to prevent scratching).
Warning
Replacement or repair of parts for height adjustment systems with energy storage must only be performed by qualified personnel.
Maintenance Instructions
- Clean with a vacuum cleaner.
- Wipe with a damp cloth.
- Inspect the product regularly for defects.
Electrical Components
If the product has electrical parts (e.g., for height adjustment):
- This appliance can be used by children aged 8 and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, provided they are supervised or instructed on safe use and understand the hazards.
- Children should not play with the appliance.
- Cleaning and user maintenance should not be performed by children without supervision.
- The appliance must only be used with the provided power supply unit.
- The external flexible cable or cord of the transformer cannot be replaced; if damaged, the transformer must be scrapped.
- If the appliance has a heated surface, persons insensitive to heat must be careful.
- The power supply unit must not be used if the plug pins are damaged.
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Caster | 5 |
| B | Chair Base | 1 |
| C | Gas Lift Cylinder | 1 |
| D | Gas Lift Cover | 1 |
| E | Mechanism | 1 |
| F | Seat Cushion | 1 |
| G | Left Armrest | 1 |
| H | Right Armrest | 1 |
| J | Armrest Bracket | 1 |
| K | Backrest | 1 |
| L | Headrest | 1 |
| M | Lumbar Support Cushion | 1 |
Hardware
| Hardware | Description | Quantity |
|---|---|---|
| a | M6*20mm Screw | 4 |
| b | M6*25mm Screw | 4 |
| c | M8*20mm Screw | 4 |
| d | M8*40mm Screw | 4 |
| e | Washer | 4 |
| f | Allen Wrench | 1 |
Assembly Steps
- Step 01: Base Assembly. Insert the five casters (A) into the chair base (B). Place the gas lift cylinder (C) into the center of the base (B) and cover it with the gas lift cover (D).
- Step 02: Attach Mechanism. Secure the mechanism (E) to the underside of the seat cushion (F) using four M6*20mm screws (a).
- Step 03: Connect Seat to Base. Place the assembled seat and mechanism (F+E) onto the gas lift cylinder (C) extending from the chair base.
- Step 04: Attach Armrest Bracket and Left Armrest. Attach the armrest bracket (J) and the left armrest (G) to the underside of the seat (F) using four M6*25mm screws (b).
- Step 05: Attach Backrest. Align the backrest (K) with the seat (F) and secure it using four M8*20mm screws (c).
- Step 06: Attach Right Armrest. Secure the right armrest (H) to the underside of the seat (F) using four M8*40mm screws (d) and four washers (e).
- Step 07: Attach Headrest and Lumbar Support. Attach the headrest (L) to the top of the backrest (K). Attach the lumbar support cushion (M) to the backrest (K).
Assembly Complete. The HOMCOM gaming chair is now ready for use.
