HOMCOM Massage Gaming Chair

Product Overview

This document provides instructions for the assembly, operation, and maintenance of the HOMCOM Massage Gaming Chair. The chair is designed for domestic use and features a massage function, adjustable components, and ergonomic support. It has a maximum weight capacity of 120 kg and an assembly process involving approximately 8 steps.

Key Features:

• CE marked product
• Massage function with 30-minute timer
• Supports up to 120 kg
• Ergonomic design with lumbar and headrest pillows
• Includes hand controller for massage functions

Important Safety Information

General Warnings:

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities if they have been given supervision or instruction on safe use and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be performed by children without supervision.
• The appliance must only be supplied at SELV (Safety Extra Low Voltage).
• Do not use if the appliance shows signs of damage.
• Not for warming animals.
• Remove outdoor shoes before use.
• The appliance has a heated surface; persons insensitive to heat should be careful.

Assembly & Usage Precautions:

• Read all instructions carefully before use and keep them for future reference.
• Use only in a dry, ventilated place away from direct sunshine.
• Maximum massage session time: 30 minutes.
• Do not use if the power cord or plug is damaged.
• Connect and disconnect the power and controller properly.
• Do not use diluents like ethyl alcohol or gasoline for cleaning.
• Beware of crushing and cutting hazards during assembly.
• The manufacturer is not responsible for damages due to improper installation or use.
• Repairs to height adjustment components should only be performed by qualified personnel.
• Do not immerse the controller in water or apply heavy loads to it.
• Persons with certain medical conditions, feeling unwell, or pregnant should not use the product.
• Individuals unable to express their will should not use the chair alone.

Assembly Instructions

Parts List:

• 1: Base (1 pc)
• 2: Gas Lift Cylinder (1 pc)
• 3: Backrest (1 pc)
• 4: Seat (1 pc)
• 5: Armrests (1 pair)
• 6: Armrest Covers (2 pcs)
• 7: Base Cover (1 pc)
• 8: Headrest Pillow (1 pc)
• 9: Lumbar Pillow (1 pc)

Hardware List:

• 10: M6*16mm Screw (4 pcs)
• 11: M8*70mm Screw (2 pcs)
• 12: M8*25mm Screw (2 pcs)
• 13: M6*20mm Screw (4 pcs)
• 14: Nut (2 pcs)
• 15: Allen Wrench (1 pc)
• 16: Wrench (1 pc)

Assembly Steps:

1. Step 01: Insert the Gas Lift Cylinder (2) into the center of the Base (1).
2. Step 02: Place the Seat (4) onto the Gas Lift Cylinder assembly.
3. Step 03: Attach the Backrest (3) to the Seat (4) using two M8*70mm Screws (11) and the Allen Wrench (15).
4. Step 04: Attach the Armrests (5) to the Seat (4) using two M8*25mm Screws (12), two Nuts (14), the Wrench (16), and the Allen Wrench (15). Ensure they are securely fastened.
5. Step 05: Attach the Armrest Covers (6) to the Armrests (5) using four M6*16mm Screws (10) and the Allen Wrench (15).
6. Step 06: Secure the Armrests (5) to the Seat (4) using four M6*20mm Screws (13).
7. Step 07: Attach the Base Cover (7), Headrest Pillow (8), and Lumbar Pillow (9) to the chair.
8. Step 08: Connect the Hand Controller (9) to the designated port on the chair.

Operation Guide

The chair is operated using the included Hand Controller.

Controller Functions:

• Output: DC5V, 2000mA
• The product features a 3-way motor massage core.
• Preset Time: 15 minutes (automatic shut-off).
• Power Button: Soft ON/OFF. Press to start; press again to enter standby.
• Intensity Button: Adjusts massage strength through three levels (Weak, Moderate, Strong). The indicator light will flicker and change accordingly.
• Mode Button: Cycles through five vibration modes (P1 to P5). The corresponding indicator light will illuminate for the selected mode.
• Position 2#, 3#, 4# Keys: These are switch regulating keys for the second, third, and fourth vibrating motors, providing massage for the waist, shoulders, and legs respectively. These functions aim to relieve local muscle tension, promote blood circulation, and build body strength for an ideal massage effect.
• Time Key: Sets the massage duration. The default is 15 minutes, after which the product automatically shuts down for protection.

Before Use:

1. Connect the Hand Controller to the chair.
2. Connect the power plug.
3. Touch the power switch to begin the massage.

To Stop Use:

1. Turn off the main power switch.
2. Unplug the power USB cable.
3. Disconnect the Hand Controller plug.

Maintenance and Storage

Maintenance:

• Clean the chair with a soft fabric.
• Regularly check the seating and structure for any signs of damage.
• Do not use diluents such as ethyl alcohol or gasoline for cleaning.

Storage Conditions:

• Store the fabric in a completely dry, clean, and dry place to avoid mold.
• If the product is idle for a long time, disconnect the power.

Disclaimer

HOMCOM strives to ensure the accuracy of its product manuals. However, printed files may contain technical or printing errors. HOMCOM is not responsible for the appropriateness or accuracy of the information provided, nor for errors within these files. HOMCOM reserves the right to revise technical parameters and installation figures. The manufacturer declines all responsibility for damages caused by improper installation, misuse, or unauthorized repairs. Users are responsible for understanding the product's features and functions and assuming associated risks.