Hyundai WS SENZOR 43

Introduction

Thank you for purchasing this product. Please read these operating instructions carefully to learn how to operate the equipment properly. After reading the manual, store it in a safe place for future reference.

Outdoor Sensor

The outdoor sensor displays temperature and humidity. It features a transmission LED, a temperature display, a humidity display, a wall mount hole, a 'RESET' button, a battery compartment, and a connector for an external probe.

Component Identification:

• C1: LED transmission indicator
• C2: Temperature display
• C3: Humidity display
• C4: Wall mount hole
• C5: 'RESET' button
• C6: Battery compartment
• C7: Cable probe connector

Getting Started

The battery compartment is located behind the back cover. Unscrew the cover to open it. Insert 2 AA batteries, observing the polarity markings ('+' and '-').

Installation

The sensor can be placed on any flat surface or mounted on a wall using the hanging hole on the back of the unit.

Note: Transmission between the receiver and transmitter can reach up to 70 meters in an open area. An open area is defined as a space without interfering obstacles such as buildings, trees, vehicles, or high-voltage lines.

Using the 1.5m Cord Temperature Probe

• Connect the temperature probe cable to the connector on the outdoor sensor.
• Place the metal probe housing outside and keep the temperature sensor unit indoors to prevent the battery from freezing when the outdoor temperature drops below -20 °C.
• Always use the temperature probe for measuring temperatures in the following ranges: -50 °C to 0 °C and +50 °C to +70 °C.

Important Safety Information and Disposal

WARNING: TO AVOID DANGER OF SUFFOCATION, KEEP THE PLASTIC BAG AWAY FROM BABIES AND CHILDREN. THE BAG IS NOT A TOY. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES, OR PLAYPENS.

Disposal of Old Electrical & Electronic Equipment:

This symbol [?] on the product or its packaging indicates that this product shall not be treated as household waste. Instead, it must be handed over to an appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling. Recycling materials helps conserve natural resources. For more detailed information about recycling this product, please contact your local Civic Office, your household waste disposal service, or the shop where you purchased the product.

Declaration of Conformity

ETA a.s. hereby declares that the radio equipment type WSSENZOR43 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hyundai-electronics.cz/declaration_of_conformity