Hyundai HSL942301 Solar Sensor Flood Light
This document provides the user manual for the Hyundai HSL942301 Solar Sensor Flood Light.
Cautions
- Install the solar light under direct sunshine without any obstructions.
- Ensure no other light source shines on the solar panel, as this may cause flickering or prevent the light from turning on.
- Charge the solar panel in direct sunlight for at least 8 hours for a full charge.
- Charging time may be longer on cloudy or winter days.
- Keep the product away from fire and other heat sources.
- If the product is not used for an extended period, remove the battery or perform a full charge and discharge cycle at least once every six months.
Technical Specifications
| Specification | Details |
|---|---|
| Material | ABS + Glass |
| Battery | 3.7V 2200mAh |
| Size | 143 x 97 x 44.5 mm |
| LED Quantity | 40 pcs |
| Light Effect | Max 1000 Lumens |
| Solar Panel | 5V 1.75W monocrystalline PET panel |
| Sensor | PIR |
| Sensing Time | 200 times |
| Charging Hours | 6-8 hours |
| Sensor Angle | Max 120 degrees |
| Sensing Distance | 3m |
| Waterproof | IP65 |
Installation Guide
Follow these steps for installation:
- Insert two expansion screws into the wall.
- Ensure the screws maintain a 2mm distance from the wall.
- Hang the light unit onto the screws. Adjust the angle of the solar panel to face the sun directly.
- Use the switch to set the desired color temperature.
Diagram Description: The installation process involves mounting the light using two screws, ensuring proper spacing from the wall, and angling the solar panel towards the sun. A switch is used for color temperature adjustment.
Functions
- Light Control Mode: The light operates automatically based on ambient light levels.
- Automatic Operation: Works only when illuminance is below 10 lux (i.e., in low light or darkness).
- Motion Activation: The light switches on when motion is detected and automatically switches off after 30 seconds of inactivity.
- Color Temperature Adjustment: Use the switch button to select the color temperature: 3000K (warm white), 4000K (neutral white), or 6000K (cool white).
- Brightness Adjustment: Use the switch button to set the brightness level: high, medium, or dim light.
- Memory Function: The light remembers the last set brightness and color temperature (CCT) when switched off and on again.
