Aldes TO GALVA D560/450: Galvanized Steel 45 Degree Elbow
Product Reference: 11094034
Part of the GALVA RANGE for rigid, aluminum, and special ductwork systems.
Product Description
The 45° elbow (TE 45°) is designed to connect two branches of a galvanized ductwork system at a 45-degree angle. These elbows are recommended over 90-degree elbows (TE 90°) for supply air systems, ensuring leak-free and low-pressure-drop installation at the takeoff point.
Applications
Suitable for:
- Residential collective housing (new and renovation)
- Tertiary sector premises
Installation
- Easy assembly of fittings through push-fit connections (ducts are female, fittings are male).
- Sealing achieved by applying mastic and/or perforated tape.
- Secured to the duct using self-drilling screws (4 to 6, depending on diameter).
Key Features & Benefits
- Connects two duct branches at a 45° angle, ideal for tertiary and collective ventilation systems.
- Offers superior performance in supply air applications compared to a 90° elbow.
Specifications
- Type: Oblique elbow
- Material: Galvanized steel
- Diameter: 560/450 mm
- Fire classification: MO
- Available diameters: 80 mm to 900 mm
- Galvanized steel conforms to EN 10346 standard for coating regularity.
Dimensional Data
| Reference | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11094034 | 560 | 450 |
Diagram Description: A visual representation of the 45-degree oblique elbow showing the two main diameters, labeled Ø A and Ø B.
General Data
| References | Main Material |
|---|---|
| 11094034 | Galvanized steel |
