Aldes TO GALVA D560/560 - 45 Degree Galvanized Steel Tee
Product Information and Technical Specifications
Product Overview
The Aldes TO GALVA D560/560 is a 45-degree galvanized steel tee designed for connecting two branches of a galvanized ductwork system at a 45-degree angle. This fitting is recommended over standard 90-degree tees in insufflation (supply air) systems to ensure leak-free installation and minimize pressure loss at the takeoff point.
Product Description
The 45° tee allows for the connection of two ductwork branches at a 45° angle. It is particularly suitable for insufflation systems, guaranteeing a leak-free and low-pressure-loss connection on the takeoff.
Application Domains
- Residential collective housing
- New construction
- Renovation projects
- Commercial and tertiary spaces
Implementation
- Easy assembly of accessories through push-fit connections (ducts are female, accessories are male).
- Sealing achieved by using mastic and/or gasket tape.
- Secured to the duct using self-drilling screws (4 to 6, depending on diameter).
Key Features
- Connects two ductwork branches at a 45° angle, optimized for insufflation systems compared to a 90° tee.
- Made from galvanized steel, ensuring durability and corrosion resistance.
- Available in diameters ranging from 80 mm to 900 mm.
- Galvanized steel conforms to EN 10346 standard for consistent coating quality.
- Fire classification: MO (non-combustible).
Technical Specifications
| Reference | Nominal Diameter (mm) | Material | Fire Classification |
|---|---|---|---|
| 11094032 | 560/560 | Galvanized Steel | MO |
Diagram: The fitting is a T-shaped component with two equal diameter openings (ØA and ØB) of 560 mm, angled at 45 degrees relative to the main duct axis.
General Information
- Reference: 11094032
- Main Material: Galvanized Steel
