Aldes TO GALVA - D125/100: 45° Galvanized Steel Tee Connector
This document details the Aldes TO GALVA D125/100, a galvanized steel tee connector designed for rigid, aluminum, and special ductwork systems.
Product Description
The 45° tee connector allows for the connection of two galvanized ductwork branches at a 45° angle. These TO connectors are recommended over 90° tees for insufflation systems, ensuring leak-free installation and minimizing pressure loss at the branch connection.
Application Areas
- Residential collective housing
- New construction
- Renovation
- Tertiary sector premises
Installation
- Easy assembly via push-fit connections: ducts are female, connectors are male.
- Sealing is achieved using sealant and/or perforated tape.
- Fastening to the ductwork is done using self-drilling screws (4 to 6, depending on diameter).
Reference Application
Application:
- Connection of two ductwork branches at a 45° angle in tertiary and collective networks.
- Particularly effective in insufflation systems compared to a 90° tee.
Description:
- Oblique tee in galvanized steel, diameter 125/100 mm.
Main Features
- Available for diameters from 80 mm to 900 mm.
- Galvanized steel compliant with standard EN 10346, ensuring coating regularity.
- Fire classification: MO.
Dimensional Data
| Reference | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11093208 | 125 | 100 |
Dimensional Diagram: The diagram shows an oblique tee with dimensions labeled Ø A and Ø B.
Regulatory Data
| Reference | Fire Classification |
|---|---|
| 11093208 | MO |
