Aldes TO GALVA 11094169: Galvanized Steel Oblique Tee 45°
This document provides technical specifications for the Aldes TO GALVA 11094169, a galvanized steel oblique tee designed for rigid galvanized, aluminum, and special ductwork systems.
Product Information
Model: 11094169
Product Name: TO GALVA - D500/450
The TO GALVA 45° tee allows for the connection of two ductwork branches at a 45-degree angle. It is recommended over standard 90° tees in insufflation (supply air) systems, ensuring a leak-free and low-pressure-drop connection at the branch point.
Application Domains
This product is suitable for:
- Residential and collective housing
- New construction and renovation projects
- Tertiary sector premises
Implementation Guidelines
- Easy installation via push-fit connections: ducts are female, accessories are male.
- Sealing is achieved using sealant and/or perforated tape.
- Fixing to the ductwork is done with self-drilling screws (4 to 6, depending on diameter).
Key Features & Benefits
- Connects two ductwork branches at a 45° angle, ideal for tertiary and collective systems.
- Offers superior performance in insufflation compared to a 90° tee.
- Available in diameters ranging from 80 mm to 900 mm.
- Constructed from galvanized steel conforming to EN 10346 standard for consistent coating quality.
- Fire classification: MO.
Technical Specifications
Dimensional Data
| Reference | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11094169 | 500 | 450 |
Diagram Description: The diagram illustrates an oblique tee with two main connection points labeled Ø A and Ø B, showing the 45-degree angle of the branch connection.
Regulatory Data
| Reference | Fire Classification |
|---|---|
| 11094169 | MO |
General Information
- Main Material: Galvanized Steel
For more information, please contact your Aldes advisor. Aldes reserves the right to make technical modifications to its products. Information is non-contractual.
