OttLite Tulip Desk Lamp

Model Numbers: 15CVTSV8, 15CVTCH8

Revision: REV092513

Welcome

Congratulations! You've purchased the finest in natural lighting technology with your new OttLite® product.

Product Registration

Please complete the enclosed Product Registration Form and return it today by mail, or register online by going to: http://warranty.OttLite.com.

Important Warnings

WARNING: To prevent electric shock, make sure the lamp is not plugged into an electrical socket until all assembly steps are complete.

Lamp Assembly

Remove the lamp from its packing and place the lamp body (A) base flat on a steady surface.
Refer to the "Bulb Installation and Removal" section to install the bulb in the lamp.
Plug the cord into a standard 120Vac outlet.
To turn the lamp on or off, depress the pushbutton switch (C).
To extend the shade (B), grasp the lamp body (A) with one hand and the base of the shade (B) with the other hand. Pull the shade straight out of the base until it is fully extended (as shown in Figure 2). Do not force the shade beyond its stopping point to avoid damaging the lamp.
To position the shade, simply bend the flexible neck (D) (as shown in Figure 3) as needed to point the light. To avoid damaging the lamp, do not force the flexible neck into a sharp bend.
To return the shade (B) to its retracted position, straighten the flexible neck (D) and shade to a vertical position (as shown in Figure 2). Grasp the flexible neck a few inches above the lamp body (A) and begin pushing the flexible neck into the lamp body. The shade (B) may be held to push the last few inches of the flexible neck into the lamp body.

Figure 1: Illustration showing the lamp base (A), shade (B), and switch (C). An upward arrow indicates placing the lamp body flat.

Figure 2: Illustration showing the lamp body (A) and flexible neck (D) with the shade (B) being extended. A curved arrow indicates the extension motion.

Figure 3: Illustration showing the lamp body (A) and flexible neck (D) with the shade (B) bent to direct light. The flexible neck allows for adjustable positioning.

Bulb Installation and Removal

Make sure that the lamp is not plugged into an electrical socket.
If the lamp has been in use, allow it to cool for approximately 5 minutes before proceeding.
To install the bulb in the socket, thread the base of the bulb into the socket, turning clockwise until snug.
CAUTION: Do not overtighten the bulb. Overtightening the bulb may make removal difficult, damage the lamp, or damage the bulb.
To remove a bulb already installed in the lamp, unthread the bulb from the socket by turning counterclockwise to loosen.
Do not allow the glass part of the bulb to strike any hard surface, as it may break.

Please note that in operation, OttLite® tubes are not dimmable.

Enjoy your OttLite® Tulip Desk Lamp!

This lighting system is designed for use with OttLite® type bulbs (style number ED15-S). Use of other products voids the warranty and may result in damage to the lighting system.

Important Safety Instructions

CAUTION! IMPORTANT SAFETY INSTRUCTIONS:

This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter the plug.

CAUTION: To prevent electric shock, match the wide blade of the plug to the wide slot and fully insert.

CAUTION: If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. Indoor use only.

Product Details

Product Name: 15w Tulip Desk Lamp

Model Numbers: 15CVTSV8, 15CVTCH8

Part Number: PL7966

Revision: REV092513

	OttLite F30G53/F30SV3 13-Watt Flexible Natural Daylight Desk Lamp User Guide Learn how to assemble, use, and maintain your OttLite F30G53/F30SV3 13-Watt Flexible Natural Daylight Desk Lamp. This guide includes step-by-step instructions, safety warnings, and bulb replacement information.
	OttLite 18w Flex Arm Plus Lamp: Assembly, Usage, and Safety Guide A comprehensive guide for the OttLite 18w Flex Arm Plus lamp, covering assembly instructions for table and clamp mounting, tube insertion and replacement, important safety warnings, and FCC compliance information. Includes detailed textual descriptions of diagrams and parts.
	OttLite Slimline LED Desk Lamp: User Manual and Setup Guide Get detailed setup instructions, operation guidance, safety warnings, and FCC compliance information for the OttLite Slimline LED Desk Lamp (models CS33600C, CS336G5C). Learn how to adjust brightness and color temperature.
	OttLite 13w Executive Desk Lamp Assembly and Safety Manual Discover the OttLite 13w Executive Desk Lamp (OTL13DWS), designed with natural lighting technology for optimal clarity. This manual provides comprehensive assembly, operation, and safety instructions, including details on adjusting lamp tension, tube replacement, and important electrical warnings. Ensure proper setup for a superior lighting experience.
	OttLite Clip-On LED Easel Lamp User Manual and Safety Information User manual and safety instructions for the OttLite Clip-On LED Easel Lamp (models CSJ37G5C, CSJ37PNC). Includes assembly, operation, safety warnings, and FCC compliance information.
	OttLite Refine LED Desk Lamp User Manual Learn how to set up, operate, and adjust your OttLite Refine LED Desk Lamp (Models F1D83BN9, F1D83BR9, F1D83BN9-SHPR, F1D83BR9-SHPR). This manual includes safety warnings, FCC compliance, and product features like adjustable brightness and a USB charging port.
	OttLite Bulb Replacement Instructions and Product Information Comprehensive guide to replacing OttLite light bulbs, including specifications for various OttLite lamps, ballasts, and replacement bulbs. Features product details for task lamps, plant growth lamps, and vanity mirrors.
	OttLite LED Desk Lamp with Wireless Charging - User Manual and Setup Guide Comprehensive guide for the OttLite LED Desk Lamp with Wireless Charging (Models CS2QC00Z, CS2QCG5Z, B22FS). Includes setup, operation, safety warnings, wireless charging, and clock/alarm functions.