ELAC Debut ConneX DCB41

Introduction

Thank you for purchasing this ELAC product. Since its inception in 1926, ELAC has been dedicated to achieving the very best in audio technology. Your new ELAC speakers are engineered to the highest standards, utilizing premium components developed by a passionate team focused on delivering a new dimension of sound quality to your home.

What's in the Box

• Remote Control
• Batteries
• Rubber Feet
• Power Cord
• Speaker Cable
• HDMI Cable

Connections

The ELAC Debut ConneX DCB41 speakers offer versatile connectivity options:

Turntable Connection

To connect a turntable:

• Ensure the turntable's built-in pre-amplifier is set to 'Off' if the DCB41 is set to 'ON'.
• If using the turntable's Phono pre-amplifier, set its switch to 'ON' and the DCB41 to 'OFF'.
• The Ground connection is optional but recommended to reduce residual noise.

Television Connection

You can connect your television via HDMI (supporting eARC and ARC) or Optical Cable. Your television remote may also control the power, mute, and volume of your Debut ConneX speakers.

Subwoofer Connection

Connect a subwoofer to the 'SUB OUT' terminal for enhanced bass performance.

Computer Connection

Connect to your computer using a USB Type B cable (often referred to as a printer cable).

Bluetooth Connection

When the speaker powers on, the BT LED will flash if no device is paired. The speaker will appear as “ELAC DCB41” on your device. Pairing can also be initiated by pressing and holding the 'BT Source' button on the remote until the LED flashes, or by pressing and holding the rear volume button while in BT input mode until the LED flashes.

Controls and Inputs/Output

The rear panel of the ELAC Debut ConneX DCB41 features the following:

• 1. AC Mains Inlet: For power connection.
• 2. HDMI (ARC) Input: For connecting HDMI sources.
• 3. Volume/Power/Source Knob: Used to adjust volume, change input sources, and power the unit on/off. Rotating the knob increases or decreases volume. Pressing it turns the unit on. Pressing and holding in BT input initiates pairing. Pressing briefly when on cycles through input sources.
• 4. L/R Switch: Determines the speaker output assignment (Left or Right).
• 5. USB for Update: For firmware updates.
• 6. Ground Screw Terminal: For turntable ground connection.
• 7. USB Input: For connecting USB devices.
• 8. Optical Input: For connecting optical audio sources.
• 9. Subwoofer Output: Connect a subwoofer here.
• 10. Phono/Line Switch: Selects the input type for the Line/Phono input.
• 11. Line/Phono Input: Connect line-level or phono-level sources.
• 12. Speaker Output: Connects to the passive speaker.

Remote Control

The included remote control provides access to various functions:

• Power ON/OFF: Turns the speakers on or off.
• BT Source: Selects the Bluetooth input.
• Volume Up/Down: Adjusts the speaker volume.
• Previous (BT)/Next (BT): Navigates tracks for Bluetooth sources.
• LED Intensity: Adjusts the brightness of the front LED.
• Optical Source: Selects the Optical input.
• USB Source: Selects the USB input.
• Phono Source: Selects the Phono input.
• Mute: Mutes the audio output.
• HDMI Source: Selects the HDMI input.

Setting Left or Right Speaker

The L/R switch (4) on the rear panel determines the speaker output assignment. Setting the switch to 'L' designates the connected speaker as the LEFT speaker, and setting it to 'R' designates it as the RIGHT speaker.

Safety Instructions

1. General Information: Please read and follow all safety instructions and keep them for future reference. Check the speaker for any damage before use. Ensure the speaker is in perfect working condition, as damaged parts can cause personal injury.
2. Use Only as Directed: Connect the speakers according to the manual's instructions. ELAC speakers may have spikes or anti-slip feet for leveling. Ensure the speaker is vertically aligned for stability to prevent tipping.
3. Location: Install speakers on a level surface. Avoid direct sunlight, high humidity, extreme temperatures, and proximity to CRT televisions (due to potential magnetic interference) or magnetic cards.
4. Overload: Avoid extreme overload due to very high volume, which can damage components. Do not leave speakers unattended under extreme overload conditions.
5. Service: Do not open the speaker cabinet, as it contains components with dangerous electrical levels. Servicing should only be performed by qualified service personnel. Servicing is required if the speaker is damaged, exposed to liquid or moisture, does not operate normally, or has been dropped.
6. Fuse Links: If a fuse blows, replace it only with the correct type and rating as indicated on the loudspeaker. A spare fuse is typically included.
7. Cleaning: Clean only with a soft, smooth cloth or dust brush. Avoid scouring agents, alcohol, or harsh chemicals, as they can damage finishes and rubber feet. Consider using an anti-slip mat under the speakers.
8. Volume: Continuous high volume can cause severe hearing damage. Listen responsibly.
9. Disposal: Dispose of packaging materials responsibly. At the end of its life, do not dispose of the speaker with household waste. Recycle it according to local legislation, as it contains valuable raw materials. Disable the speaker before disposal.
10. Power: Connect the subwoofer only to voltages specified on the rear panel. Using incorrect voltages can cause irreversible damage and void the warranty. Avoid using plug adapters that may allow connection to incorrect voltages.

WARNING! Ensure the product is stable to prevent injury from tip-over. Stability can be enhanced with spikes on carpet or adhesive tape on slippery floors. Do not install near heat sources, ventilation openings, or in enclosed spaces. Keep away from open flames. Avoid placing the speaker near transformers, as electromagnetic fields can cause hum noise. Some materials may cause colored imprints on surfaces when in contact with anti-slip feet or spikes.

Philosophy

ELAC is committed to audio excellence, striving to deliver the best possible sound quality. The Debut ConneX series embodies this commitment, offering high-quality components and meticulous construction for an exceptional listening experience.