Edifier X5 Pro True Wireless Earbuds

What's in the Box

• Two Edifier X5 Pro earbuds
• One charging case
• One USB-C charging cable
• Three sets of eartips (S/M/L)
• One user manual

Power On/Off

The earbuds power on and off automatically when the charging case is opened or closed.

Bluetooth Pairing

First Pairing

Upon initial power-on (by opening the case), the earbuds automatically enter Bluetooth pairing mode. On your device, navigate to Bluetooth settings and select 'EDIFIER X5 Pro' to connect.

Pairing for a New Device

To pair with a new device:

1. Place both earbuds into the charging case and keep the case open.
2. Press and hold the button on the charging case for approximately 3 seconds, until the white and red LEDs on the case blink.
3. On your device, select 'EDIFIER X5 Pro' in the Bluetooth settings to connect.

Note: For future use, the earbuds will automatically reconnect to the last paired device.

Resetting the Earbuds

To reset the earbuds:

1. Place both earbuds into the charging case and keep the case open.
2. Press the button on the charging case three times. The white LED will blink until the reset process is complete.
3. After resetting, the earbuds will automatically enter Bluetooth pairing mode.

Controls

The earbuds feature touch controls. Tap actions are indicated by the number of taps (e.g., x2 for double-tap, x3 for triple-tap).

Left Earbud

• Double Tap (x2): Play Previous Track.
• Triple Tap (x3): Decrease Volume.

Right Earbud

• Double Tap (x2): Play/Pause music, Answer/End Call.
• Triple Tap (x3): Increase Volume.

Both Earbuds

• Long Press (approx. 2 seconds): Activate Voice Assistant.
• Long Press (approx. 2 seconds): Cycle through sound modes: Active Noise Cancellation (ANC) / Ambient Sound / ANC Off.

Charging

Charging Input:

• Earbuds: 5V 200mA
• Charging Case: 5V 1A

Important Note: Avoid charging the earbuds if the charging port contains sweat or other liquids, as this may cause damage.

Edifier ConneX App

Download the Edifier ConneX app for enhanced features and control.

Compliance and Safety Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: Z9G-EDF222

IC Statement

CAN ICES-003(B) / NMB-003(B). IC:10004A-EDF222

EU Declaration of Conformity

The radio equipment type EDF200136 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.edifier.com/int/eu-doc.html

Bluetooth® Trademark

The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. Any use of such marks by Edifier is under license.