Edifier X3 Pro True Wireless Earbuds

User Manual

1. Power ON/OFF

Take out or place both earbuds into the charging case to power them on or off. A 1-second action is indicated.

2. First Pairing

Once powered on, the earbuds will automatically enter Bluetooth pairing mode. Select "EDIFIER X3 Pro" from your device's Bluetooth list to connect.

3. Pairing for a New Device

Upon powering on, the earbuds automatically reconnect to the last used device. If the connection fails, they enter Bluetooth pairing mode within 10 seconds. Manual disconnection also immediately enters pairing mode. Select "EDIFIER X3 Pro" from the new device's list to connect.

4. Multipoint Connection

To connect to a second device: Disconnect the earbuds from Device A, which will automatically enter Bluetooth pairing mode. Go to Device B settings and select "EDIFIER X3 Pro" from the product list to connect. Then, select "EDIFIER X3 Pro" from Device A's list to reconnect. For subsequent use, the earbuds will automatically reconnect to the two most recently used devices.

5. Reset / Left & Right Connection

The left and right earbuds are connected by default. If they become disconnected, follow these steps to re-pair:

Take out the earbuds.
Tap the left and right earbuds 5 times each within 8 seconds to reset and enter TWS pairing mode. The white LED will blink slowly.
After successful reset and TWS connection, the earbuds will enter Bluetooth pairing mode, with white and green LEDs blinking rapidly.

6. Charging

Input: Earbuds: 5V ⎓ 200mA; Charging Case: 5V ⎓ 1A.

Note: Ensure the USB-C port is completely dry before charging.

7. Controls

Left Earbud (L) / Right Earbud (R):

Double Tap (x2): Control sound (default: Noise Cancellation ON)
Triple Tap (x3): Control sound (default: Noise Cancellation ON)

Built-in microphones are available for hands-free smartphone calls.

	Edifier X3 Pro True Wireless Earbuds with Active Noise Cancellation - User Manual User manual for the Edifier X3 Pro True Wireless Earbuds. Learn how to power on/off, pair devices, use multipoint connection, reset the earbuds, charge them, and control playback and features.
	Edifier X5 Pro True Wireless Earbuds with ANC - User Manual User manual for the Edifier X5 Pro True Wireless Earbuds, detailing power on/off, pairing, reset, charging, and controls with active noise cancellation.
	Edifier X5 Pro True Wireless Earbuds User Manual User manual for the Edifier X5 Pro True Wireless Earbuds with Active Noise Cancellation, covering power on/off, pairing, reset, charging, and controls.
	Edifier X5 Pro True Wireless Earbuds with Active Noise Cancellation Edifier X5 Pro are true wireless earbuds featuring Active Noise Cancellation (ANC) with multiple modes, clear call quality powered by AI, and ultra-low latency for gaming. They offer long battery life, dust and splashproof design (IP55), and customization via the Edifier Connex App. Available in Gray, Pink, and Light Blue.
	Edifier Lolli Pods Pro True Wireless Earbuds with Active Noise Cancellation User Manual Comprehensive guide to Edifier Lolli Pods Pro true wireless earbuds with active noise cancellation, covering setup, charging, operation, troubleshooting, and maintenance.
	Edifier X5 Pro True Wireless Earbuds with Active Noise Cancellation - User Manual User manual for Edifier X5 Pro True Wireless Earbuds, covering setup, pairing, controls, charging, and compliance information. Features Active Noise Cancellation.
	EDIFIER X5 Pro True Wireless Earbuds with Active Noise Cancellation User Manual Comprehensive user manual for the EDIFIER X5 Pro True Wireless Earbuds, detailing setup, pairing, controls, charging, and troubleshooting. Features active noise cancellation.
	Edifier TWS330 NB True Wireless Earbuds with Active Noise Cancellation User Manual User manual for Edifier TWS330 NB True Wireless Stereo Earbuds featuring Active Noise Cancellation. Learn about product description, accessories, power on/off, charging, Bluetooth connection, functional operations, FAQs, and maintenance.