EDIFIER X5 Pro
True Wireless Earbuds with Active Noise Cancellation
1. Power ON/OFF
Open or close the charging case ?️ to power the earbuds ? on or off.
2. First Pairing
Once powered on, the earbuds ? will automatically enter Bluetooth pairing mode.
Select "EDIFIER X5 Pro" in your device's Bluetooth settings to connect.
3. Pairing For New Device
1. Place the earbuds ? in the charging case ?️ and keep it open.
2. Press and hold the button on the case for 3 seconds ⏱️3s until the white and red LEDs ?⚪ blink.
3. Select "EDIFIER X5 Pro" in your device's settings to connect.
Note: For subsequent use, the earbuds will automatically connect to the device used last time.
4. Reset
1. Place the earbuds ? in the charging case ?️ and keep it open.
2. Press the button on the case 3 times ???. The white LED ⚪ will blink until the reset is complete. The earbuds will then automatically enter Bluetooth pairing mode.
5. Charging
Input: 5V ⎓ 200mA (Earbuds ?) | 5V ⎓ 1A (Charging case ?️)
Note: Please do not charge the earbuds if there is sweat or other liquids inside the charging port, as this may damage the earbuds.
6. Controls
The earbuds feature touch controls for managing audio and noise cancellation.
Default Sound Control:
- Noise Cancellation (ANC)
- Ambient Sound
- Noise Cancellation Off
Control Actions (example, may vary):
- Single Tap (x1): Play/Pause music, Answer/End call
- Double Tap (x2): Next track (Right earbud), Previous track (Left earbud)
- Triple Tap (x3): Activate Voice Assistant (e.g., Siri, Google Assistant)
- Long Press (e.g., 2s): Switch between ANC, Ambient Sound, and ANC Off modes.
Note: Images are for illustrative purposes only and may differ from the actual product.
