JLab GO Air Sport True Wireless Earbuds

Step 1: Take earbuds out of the case and remove stickers. Place back in the case and close the door.

Diagram: Two earbuds with stickers being removed, then placed back into a closed charging case.

Step 2: A red light on the case indicates charging. Remove earbuds from the case.

Diagram: Charging case with a red light indicator, earbuds removed from the case.

Step 3: One earbud will blink blue/white, indicating it is ready to pair to your device.

Diagram: A single earbud blinking blue/white.

Step 4: Select "JLab GO Air Sport" in your device's Bluetooth settings to connect. A voice prompt "Bluetooth connected" followed by blinking white lights will indicate you are connected.

Diagram: A smartphone screen showing Bluetooth settings with "JLab GO Air Sport" selected and a finger icon indicating connection.

Adding New / Additional Bluetooth Devices

Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from the new device. Take earbuds out of the case; they will automatically enter Bluetooth Pairing. Select "JLab GO Air Sport" in device settings to connect.

Button Functions

Left Earbud:

• Volume Down: Single tap
• SIRI (iOS) or "OK GOOGLE" (ANDROID): Double tap
• Track Back: Press and hold for 1+ second

Diagram: Left earbud with touch area highlighted for functions.

Right Earbud:

• Volume Up: Single tap
• Play / Pause: Double tap
• Track Forward: Press and hold for 1+ second

Diagram: Right earbud with touch area highlighted for functions.

Call Functions (Either Earbud):

• Answer Call: Single tap
• Hang Up: Double tap
• Reject Incoming Calls: Press and hold for 1+ second
• EQ Change: Triple tap

Voice Prompts

• "JLab ON": Power ON
• "Ready to Pair": GO Air Sport is ready to pair to Bluetooth device
• "Bluetooth Connected": Earbud is connected to device
• "Battery Full": 100-75%
• "Battery Medium": 75-25%
• "Low Battery": Less than 25% (When power decreases to 10%, "Low Battery" will play one time)
• "Goodbye": Power OFF

Custom EQ³ Sound Modes

Tap either the right or left earbud 3 times for different EQ settings. GO Air Sport will cycle through 3 EQ settings.

Diagram: Circular display showing the three EQ modes.

Charging Earbuds

Step 1: Earbuds will power off when placed in the case and start charging.

Diagram: Earbuds placed inside the charging case, showing the charging process. Case indicator lights: Solid Red (100-25%), Blinks 4x Red (less than 25%).

Step 2: Earbuds will auto power on and connect to your device when removed.

Diagram: Earbuds removed from the case, showing them auto-powering on and connecting.

Charging Case

Connect the GO Air Sport into a computer or USB 5V 1A (or less) output device.

Diagram: Charging case connected via USB cable to a computer or power adapter. Indicator lights: Blinks Blue (charging), Solid Blue (fully charged).

Fitting

Try all ear tips for best fit and proper seal. Place hook behind ear. Rotate and adjust for best fit.

Diagram: Instructions on how to insert the earbud, place the hook behind the ear, and adjust for a proper seal.

Quick Tips

• The left or right earbud can be used independently for music and phone calls. Simply choose one and take it out of the case to connect.
• Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on Bluetooth on the chosen device to connect.

Warning

Fully dry off the earbuds before putting them in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant, but the case is not.

Troubleshooting

Connection Failure or Earbuds Disconnected (Manual Reset)

1. Keep the earbuds in the charging case and forget "JLab GO Air Sport" from your Bluetooth device settings.
2. Quick tap 7 times on one earbud in the charging case. The earbud blinks blue 4 times.
3. Quick tap 7 times on the other earbud in the charging case. The earbud blinks blue 4 times.
4. Take both earbuds out of the charging case. One earbud will be solid white, and the other will blink blue/white, indicating it is ready to pair to your device.

For instructional videos, visit jlab.com/manuals.

Cautions

• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds.
• Wax may build up in the earbud tips, lowering sound quality. Carefully remove the wax with a cotton swab or other small tool to improve sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• Treat your earbuds with care, similar to a nice pair of sunglasses, and keep them in a safe location when not in use.

More from JLab

Shop products | Product alerts | Burn-in your headphones

Download on the ? App Store | Get it on ▶️ Google Play

Visit JLAB.COM