AGPTEK BTS141 Bluetooth Speaker User Manual

Introduction

Thank you for purchasing an AGPTEK product. Please read this User Manual carefully before using the product and retain it for future use.

Note: To find out how to use the S2 model or if you have a problem, please refer to the User Manual. This User Manual can help you understand how to use the product and troubleshoot problems.

For optimal use, please connect the speaker to a computer with a USB 2.0/3.0 port or a 5V/1A charger (not a quick charger) using the included USB cable. It will usually be fully charged in 3 hours.

AGPTEK Forum Registration

Please visit www.agptek.com/forum and register on the AGPTEK official forum to get better customer support.

Manufacturer Information

Manufacturer: Betrue Technology Company Limited.

Address: D07, 5/F, King Yip Factory Building, 59 King Yip Street, Kwun Tong, Kowloon, Hong Kong.

E-mail: support@agptek.com.

A. Buttons & Controls

B. LED Digital Screen

After booting up, the speaker displays the Time Calibration Interface first. Press the [M] button to cycle through different interfaces:

• 1: Time Calibration Interface
• 2: Bluetooth Mode [Bluetooth]
• 3: FM Function
• 4: TF Card Mode (Available when a TF card is inserted)

C. Time Calibration

1. In power-on mode, press the [M] button to switch to clock mode if it is in another mode.
2. Press and hold the [M] button to enter hour set mode. The hour number will blink on the LED display.
3. Press the [<<] or [>>] button to adjust the hour time.
4. Short press the [Play/Pause] button to confirm the hour time and enter minute set mode. The minute number will blink on the LED display.
5. Press the [<<] or [>>] button to adjust the minute time.
6. Short press the [Play/Pause] button to confirm the minute time set.

Note:

• To maintain battery life and performance, if the speaker is not used for a while, recharge the battery at least once every month.
• Connect the Micro USB socket to a PC's USB port or a DC 5V, 1000mA power source via USB cable.

D. Playing Music Via Bluetooth

Power on and Pairing

1. Press and hold the [Power/Call] button to turn on the device. A series of tones will sound. If in clock mode, press the [M] button to switch to Bluetooth mode; the [Bluetooth] icon will blink quickly.
2. Turn on your device's Bluetooth. The device will automatically enter Bluetooth searching mode. If not, search manually and tap the relevant selection to enter searching mode (refer to your device's manual if necessary).
3. On your device, select "AGPTEK S2" for pairing. After a few seconds, a connected message will appear on your device. (Some Bluetooth devices may require a pairing password, such as "0000").
4. If pairing is successful, the [Bluetooth] icon will be constantly displayed. You can now play music.
5. Press and hold the [Power/Call] button to turn off the device when not in use.

Disconnect from paired device

1. Press and hold [Play/Pause] to switch to new "Searching/Pairing" mode; the paired device will be disconnected. Alternatively, select "Disconnect" from your mobile device's Bluetooth paired device list. The Bluetooth Speaker will return to "Searching/Pairing" mode in seconds, with a series of tones and a fast blinking [Bluetooth] icon.
2. You can now pair a new mobile device or power off the Bluetooth Speaker. Note: If Bluetooth is not connected for more than 8 minutes, the device will shut down automatically.

Auto re-connect with paired device and New pairing

1. Every time you turn on the speaker and enter Bluetooth mode, it will first search for the previously paired mobile device. The speaker will prioritize reconnecting to this device if it is in Bluetooth searching mode.
2. If the device is not found within a few seconds, the Bluetooth Speaker will internally enter new pairing mode.
3. You can now process for pairing a new mobile device (Refer to "Power on and Pairing").

After Bluetooth Pairing

After Bluetooth pairing, the speaker can be operated with the following buttons while playing music:

Note: When maximum or minimum volume is reached, a series of tones will sound.

E. Call Function

About Hand-free Function

When an incoming call occurs during Bluetooth music playback:

• The ringing sound will play, and the music playback will pause automatically.

Tip: Speak directly to the [MIC Hole] from a distance of 30-60cm for the best speakerphone performance.

Redial for last call Function

To redial the last called number, even when the speaker is in music playing mode:

Note: Ensure your mobile phone has a recent outgoing call record; otherwise, the redial function cannot be activated.

F. FM Function

Auto Tune Radio Frequency

1. In Bluetooth mode, press the [M] button to enter FM mode.
2. Press and hold the [Play/Pause] button to enter auto searching mode.
3. The FM radio will scan frequencies from 87.5 MHz to 108.0 MHz and save the searched stations automatically.
4. After searching, the first found station will play automatically. You can select radio stations P01-P40 using the [<<] or [>>] buttons and confirm by pressing the [Play/Pause] button again.

FM playing control

To switch back to Bluetooth mode, press the [M] button twice.

G. How to set the clock

1. In time mode, press and hold the [Play/Pause] button to access alarm clock settings. "AL" will appear on the screen. Press the [Play/Pause] button to turn the alarm clock ON.
2. When "ON" is displayed, press the [Play/Pause] button to go to hour set mode.
3. Press the [<<] or [>>] button to adjust the hour time.
4. Short press the [Play/Pause] button to confirm the hour time and enter minute set mode. The minute number will blink on the LED display.
5. Press the [<<] or [>>] button to adjust the minute time.
6. Short press the [Play/Pause] button to confirm the minute time set.
7. When the alarm is set, it will emit a series of beeps, and you can adjust the alarm volume.
8. Press the [+] or [-] button to adjust the volume level.
9. Short press the [Play/Pause] button to confirm the volume level, completing the alarm clock set.
10. Press the [Power/Call] button once to stop the alarm.

H. Low Power Reminder and Auto Sleep

1. The Bluetooth Speaker will emit tones every minute as a low power reminder. Connect the device to USB power for charging if you wish to continue using it.
2. Otherwise, the Bluetooth Speaker will automatically power off after a few minutes when the battery level is low.
3. In this case, the device cannot be turned on until the battery has been recharged for at least 10-15 minutes, as it may not have enough energy.

I. Reset the Device

1. In certain circumstances, the device's function may hang and require a reset. To reset the Bluetooth speaker:
2. Insert a needle into the reset hole near the Micro USB socket. The device will reset automatically.
3. After resetting, turn on the Bluetooth Speaker by pressing and holding the [Power/Call] button.

Note: Do not reset the device if it is functioning properly.

J. Splash Proof Handling

The Bluetooth Speaker can withstand brief jets of water on its surface (IPX5 water resistant). However, it should never be operated under running water or fully immersed in water. Before using the speaker in a bathroom, ensure the splash-proof "Rubber Seal Cover" is securely tightened. After use in a bathroom, wipe the exterior of the unit thoroughly if it becomes wet with moisture or water splashes to prevent internal damage.

Note: If water enters the USB socket, always clean it thoroughly before charging the device.

K. Specifications