AGPTEK Portable Bluetooth Speakerphone User Manual

Quick Guide

The AGPTEK Portable Bluetooth Speakerphone is a mini-shape device designed for convenience and freedom in wireless communication. It can function as a hands-free kit in a car or as a conference speakerphone at home or in the office. Featuring a built-in microphone with D.S.P. for Noise Cancellation/Suppression, it delivers outstanding full duplex sound quality.

Diagram Description: The device is a compact, oval-shaped speakerphone. Key components are labeled: ON/OFF switch, Microphone, Volume Up (+), Answer/End call button, Volume Down (-), and USB interface. The product is marked as "MADE IN CHINA".

Charging Your Bluetooth Speakerphone

This device contains a rechargeable battery. It is recommended to fully charge the battery before the first use. Charging takes approximately 3 hours.

Important Notes:

1. When the battery is low, a voice prompt "Battery low" will be heard.
2. To extend battery life and ensure stable performance, charge the speakerphone immediately when the low battery warning appears. Using the device with a low battery may shorten battery durability and stand-by time, and increase charging time. The device will automatically shut down when the battery level is very low.
3. During charging, the LED indicator lights up red. It turns off when charging is complete.

Power ON/OFF

Pressing the ON/OFF key will produce voice prompts "Power On" and "Power Off".

Note: While the device is on, pressing the Volume + and - buttons simultaneously allows you to choose the language (options include Chinese, English, Spanish, and French).

Mobile Phone Pairing

Before using the hands-free function, pair your Bluetooth-enabled mobile phone with the Speakerphone. The device supports simultaneous dual phone connection. Pairing for one phone needs to be done only once. If pairing two phones simultaneously, repeat the process twice.

Note: The LED indicator flashes red every 3 seconds when pairing two phones simultaneously.

Pairing Instructions:

1. Ensure the distance between your Bluetooth-enabled mobile phone and the Speakerphone is less than 1 meter.
2. Turn on the Speakerphone; it will automatically enter pairing mode. The LED indicator will flash blue when ready for connection.
3. Turn on your mobile phone's Bluetooth and search for Bluetooth devices (refer to your phone's user manual).
4. Select "T821" from the device list and choose to connect. Some phones may require entering the code "0000" to complete pairing. The LED indicator will flash every 3 seconds after successful pairing, and a voice prompt "connected" will be heard.
5. Hands-free mode is now activated.

Note: If the Speakerphone fails to pair with your mobile phone within 2 minutes, turn it off and repeat the steps.

Connecting of Phone 2

To connect a second Bluetooth-enabled mobile phone, follow these steps:

1. Turn off Bluetooth on your mobile phone to disconnect.
2. Turn off the speakerphone and restart it.
3. Follow the pairing instructions above.

Vibration Switch Sensor

The vibration switch sensor detects your car's door vibration when you enter. It powers on the Bluetooth speakerphone and automatically reconnects to your phone. The speakerphone will also automatically power off after 10 minutes if you leave the car, to save battery life. For automatic connection, ensure your phone's Bluetooth is on and has been previously connected to the speakerphone.

Speakerphone Operation

1. Answer a call: When a call comes in, the speakerphone will ring with the "incoming call" prompt and display the phone number. Press the answer key ? to answer the call.
2. Hang up a call: Press the ? key to hang up the phone call.
3. Redial the last phone number: Double-press the ↩️ key to redial the last number when the speakerphone is in hands-free mode and not in a call.
4. Volume Control: Press Volume (-) or Volume (+) to adjust the volume.
5. Privacy Protection While Calling: When a call comes in, press the answer key ? twice to switch to privacy mode. In this mode, you answer the call with your privacy setting (Bluetooth speaker off). You can choose between hands-free mode and privacy mode.
6. Play music: In standby mode, press the answer key ? to play music from your mobile phone. Hold the +/- buttons to skip to the next/previous song.

Device Self-protection with Low-power

When the battery is low, a "Battery low" voice prompt will sound, and the device will turn off automatically when the voltage drops below 3.0V. Please charge the device when the battery is low to prevent it from repeatedly turning on/off.

Specifications

Notice and Daily Maintenance

1. Keep the speakerphone away from liquids, moisture, and high temperatures.
2. Keep the speakerphone away from corrosive liquids.
3. Keep the speakerphone away from sharp objects to prevent scratches or damage.
4. Do not excessively detach the steel clip from the speakerphone, as this may damage internal components.
5. Keep the speakerphone away from extreme high or low temperatures, moisture, and dust.
6. Store the speakerphone in a dry environment if not used for an extended period.

Safety

1. Please be aware of local driving regulations before using this product. Concentrate on driving while using the hands-free speakerphone in your car.
2. Keep the speakerphone away from children.
3. Never use the device in areas where electronic devices or wireless communication devices are prohibited.

For any problems, please feel free to contact support@agptek.com.