[Page 4]
The T-head bolt FCSN is a versatile fastener designed for secure and easy fixing within FUS profiles. It is suitable for connecting pipe clamps to channels and is intended for use in dry interior areas.
Visuals:
Image 1: A T-head bolt assembly featuring a bolt, washer, and nut, designed for channel systems.
Image 2: Illustration depicting lightweight installation of a channel system component onto a cantilever structure.
Image 3: Illustration showing a pipe clamp connected to a channel using the FCSN system.
Applications
- Connection of pipe clamps to the channel.
- For use in dry interior areas.
Advantages
- The hammer-head nut design facilitates easy setting within the channel.
- Installation by rotating 90° [rotation symbol] allows for post-installation in an already installed channel.
Properties
- Material washer: steel according to DIN EN 10139.
- Hammer head bolt: steel with a minimum tensile strength of 400 N/mm².
- Material nut: strength category 4.
- Zinc plating: electro zinc-plated.
Installation FCSN
The installation process involves inserting the T-head bolt into the channel and rotating it 90 degrees to secure it. This allows for installation even after the channel is fixed in place.
[Page 162]
Technical Data
[Page 2]
Diagram illustrating the dimensions of the T-head bolt FCSN, showing thread size (A), length L1, and length L2.
| Item | Item no. | Thread A | Length L1 [mm] | Length L2 [mm] | Sales unit [pcs] |
|---|---|---|---|---|---|
| FCSN M 8 x 30 | 092960 | M8 | 36 | 30 | 50 |
| FCSN M 8 x 40 | 092961 | M8 | 46 | 40 | 50 |
| FCSN M 8 x 50 | 093354 | M8 | 56 | 50 | 50 |
| FCSN M 8 x 60 | 093355 | M8 | 66 | 60 | 50 |
| FCSN M 10 x 30 | 093360 | M10 | 38 | 30 | 50 |
| FCSN M 10 x 40 | 093361 | M10 | 48 | 40 | 50 |
| FCSN M 10 x 50 | 093362 | M10 | 58 | 50 | 50 |
| FCSN M 10 x 60 | 093363 | M10 | 68 | 60 | 50 |
| FCSN M 12 x 30 | 093366 | M12 | 39 | 30 | 50 |
| FCSN M 12 x 40 | 093367 | M12 | 49 | 40 | 50 |
Loads
Diagram showing the FCSN T-head bolt fitted into a channel profile.
| Item | Item no. | Max. recommended tension load for FUS 1.5 mm [kN] | Max. recommended tension load for FUS 2.0 mm [kN] | Max. recommended tension load for FUS 2.5 mm [kN] | Sales unit [pcs] |
|---|---|---|---|---|---|
| FCSN M 8 x 30 | 092960 | 3.0 | 4.0 | 4.0 | 50 |
| FCSN M 8 x 40 | 092961 | 3.0 | 4.0 | 4.0 | 50 |
| FCSN M 8 x 50 | 093354 | 3.0 | 4.0 | 4.0 | 50 |
| FCSN M 8 x 60 | 093355 | 3.0 | 4.0 | 4.0 | 50 |
| FCSN M 10 x 30 | 093360 | 4.0 | 4.0 | 5.0 | 50 |
| FCSN M 10 x 40 | 093361 | 4.0 | 4.0 | 5.0 | 50 |
| FCSN M 10 x 50 | 093362 | 4.0 | 4.0 | 5.0 | 50 |
| FCSN M 10 x 60 | 093363 | 4.0 | 4.0 | 5.0 | 50 |
| FCSN M 12 x 30 | 093366 | 4.0 | 4.0 | 5.0 | 50 |
| FCSN M 12 x 40 | 093367 | 4.0 | 4.0 | 5.0 | 50 |
[Page 163]
fischer
