Fischer Channel Nuts
Channel nut FCN
Connector - Channel nut FCN
Product Image: A 3D isometric view of a grey, rectangular channel nut with a hammer-head shape on one end and internal threads. It has serrations on the underside of the hammer head.
Installation Examples:
- Lightweight installation on cantilever: Shows a channel nut installed in a C-shaped metal channel, with a rod or threaded bolt attached to the nut and extending outwards, supported by a bracket.
- Cross connection: Shows two channel nuts installed in parallel channels, with a connecting piece or bracket linking them.
Applications
- Simple hammer-head nut for installation in FUS channels.
- The FCN is suitable for the connection of different fixtures and pipe clamps with the channel.
- For use in dry interior areas.
Advantages
- The serration on the sliding nut provides a secure hold in the FUS channel.
Properties
- Material: steel with min. tensile strength of 415 N/mm².
- Zinc plating: electro zinc-plated.
Technical Diagram: Drawing of the channel nut showing dimensions: Length (A) = 35mm, Thickness (S) = 20mm.
Technical Data
| Item | Item no. | Thread | Thickness S [mm] | Sales unit [pcs] |
|---|---|---|---|---|
| FCN 12 | 077411 | M12 | 9.0 | 100 |
Loads
| Item | Item no. | Max. recommended tension load for FUS 1.5 mm [kN] | Max. recommended tension load for FUS 2.0 mm [kN] | Max. recommended tension load for FUS 2.5 mm [kN] | Max. recommended shear load for FUS 1.5 mm [kN] | Max. recommended shear load for FUS 2.0/2.5 mm [kN] | Tightening torque for screw grade ≥ 8.8 [Nm] | Sales unit [pcs] |
|---|---|---|---|---|---|---|---|---|
| FCN 12 | 077411 | 4.0 | 5.0 | 8.0 | 2.0 | 2.5 | 50 | 100 |
Channel nut FCN 16 hdg
Connector - Channel nut FCN 16 hdg
Product Image: A 3D isometric view of a grey, rectangular channel nut with a hammer-head shape on one end and internal threads. It has serrations on the underside of the hammer head.
Installation Examples:
- Lightweight installation on cantilever: Shows a channel nut installed in a C-shaped metal channel, with a rod or threaded bolt attached to the nut and extending outwards, supported by a bracket.
- Cross connection: Shows two channel nuts installed in parallel channels, with a connecting piece or bracket linking them.
Applications
- Simple hammer-head nut for installation in FUS channels.
- The FCN is suitable for the connection of different fixtures and pipe clamps with the channel.
- For indoor and outdoor application.
Advantages
- The serration on the sliding nut provides a secure hold in the FUS channel.
Properties
- Material: steel with min. tensile strength of 415 N/mm².
- Zinc plating: hot-dip galvanised.
Technical Diagram: Drawing of the channel nut showing dimensions: Length (A) = 35mm, Thickness (S) = 20mm.
Technical Data
| Item | Item no. | Thread | Thickness S [mm] | Sales unit [pcs] |
|---|---|---|---|---|
| FCN 16 hdg | 561774 | M16 | 12.0 | 100 |
Loads
| Item | Item no. | Max. recommended tension load for FUS 1.5 mm [kN] | Max. recommended tension load for FUS 2.0 mm [kN] | Max. recommended tension load for FUS 2.5 mm [kN] | Max. recommended shear load for FUS 1.5 mm [kN] | Max. recommended shear load for FUS 2.0/2.5 mm [kN] | Tightening torque for screw grade ≥ 8.8 [Nm] | Sales unit [pcs] |
|---|---|---|---|---|---|---|---|---|
| FCN 16 hdg | 561774 | 4.0 | 5.0 | 8.0 | 2.0 | 3.0 | 50 | 100 |
Channel nut FCN A4
Connector - Channel nut FCN A4
Product Image: A 3D isometric view of a grey, rectangular channel nut with a hammer-head shape on one end and internal threads. It has serrations on the underside of the hammer head.
Installation Examples:
- Lightweight installation on cantilever: Shows a channel nut installed in a C-shaped metal channel, with a rod or threaded bolt attached to the nut and extending outwards, supported by a bracket.
- Cross connection: Shows two channel nuts installed in parallel channels, with a connecting piece or bracket linking them.
Applications
- Simple hammer-head nut for installation in FUS channels.
- The FCN is suitable for the connection of different fixtures and pipe clamps with the channel.
- For indoor and outdoor applications and in environments with high stress to components due to corrosion.
Advantages
- The serration on the sliding nut provides a secure hold in the FUS channel.
Properties
- Material: stainless steel A4 (material no. 1.4401).
Technical Diagram: Drawing of the channel nut showing dimensions: Length (A) = 35mm, Thickness (S) = 20mm.
Technical Data
| Item | Item no. | Thread | Thickness S [mm] | Sales unit [pcs] |
|---|---|---|---|---|
| FCN 16 A4 | 562664 | M16 | 12.0 | 50 |
Loads
| Item | Item no. | Max. recommended tension load for FUS 2.0 mm [kN] | Max. recommended tension load for FUS 2.5 mm [kN] | Max. recommended shear load for FUS 2.0/2.5 mm [kN] | Tightening torque for screw grade ≥ 8.8 [Nm] | Sales unit [pcs] |
|---|---|---|---|---|---|---|
| FCN 16 A4 | 562664 | 5.0 | 8.0 | 3.0 | 50 | 50 |
