Wall Mount Adaptor
SBP-300WM (IVORY) / SBP-300WMW (WHITE)
Product Overview
This product is used to install the Smart Dome Camera and Anti Vandal Camera on a wall or vertical structure.
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
- For a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
- Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
- You can install the Wall Mount Adaptor directly on the wall or mount it on the Corner Mount Adaptor (SBP-300KM) or Pole Mount Adaptor (SBP-300PM) before installation.
Installation
Pull out the external power cable, BNC cable and communications cable (for connecting to the "camera") through the rear of the Wall Mount Adaptor into the Pipe. Then, it is recommended to keep the cables in a distance of about 100 mm from the pipe.
Illustration showing external power, BNC, and communication cables being pulled through the rear of the Wall Mount Adaptor into a pipe.
Secure the Wall Mount Adaptor to the wall, corner or pole using the "Anchor Bolts or Nuts (M10)". When installing the product on a corner of the wall, use the Corner Mount Adaptor (SBP-300KM) and use the Pole Mount Adaptor (SBP-300PM) for a pole. When installing the product on a wall, mark and drill 4 holes into the Wall Mount Adaptor and insert the Anchor Bolts or Nuts (M10) before installation.
Illustration showing the Wall Mount Adaptor being secured to a wall, corner, or pole using M10 anchor bolts or nuts.
Mount the Camera set on the Pipe. Install the camera according to the camera's installation guide.
Illustration showing the camera set being mounted onto the pipe of the Wall Mount Adaptor.
Caution for Water Prevention
⚠️ Ensure proper cable management to prevent water ingress.
⚠️ Protect cables from sharp bends or damage.
Product Specifications
| Property | Value |
|---|---|
| Weight | 730g |
| Material | Aluminum |
| Operation Temperature | -50°C to 60°C |
| Operation Humidity | 0% to 100% |
Product Outline
Diagram showing the physical dimensions of the Wall Mount Adaptor. Key dimensions indicated are approximately 112mm, 80mm, 276.5mm. Mounting hole details are also shown.
