Wall Mount SBP-125WMW
This document provides installation instructions for the Hanwha Vision SBP-125WMW Wall Mount.
What's Included
The package typically includes the wall mount, mounting plate, special screws, anchors, and machine screws.
Product Features
This product is a Wall Mount used for installing cameras on a wall or vertical structure.
Installation Precautions
- Ensure the installation location can support four times the total weight of the product and the camera.
- It is highly recommended to use the installation screws provided in the product package.
- For installation on a concrete wall, use the plastic anchor and installation screws included in the package.
Installation Steps
-
For installation, use the plastic anchor and the installation screws contained in the product package.
1) To mount it on the wall, use plastic anchors and tapping screws.
2) To install in a gang box, use the machine screws.
Diagram Description: The diagram shows the wall mount and mounting plate, along with special screws, anchors, and machine screws.
-
Diagram Description: This diagram illustrates attaching the wall mount to the mounting plate using screws. The top of the plate is indicated with an arrow labeled 'TOP'.
-
Close the MOUNT WALL COVER contained in the product package.
Diagram Description: The diagram shows the camera being attached to the wall mount, with screws securing it, and a cover being placed over the connection.
-
Close the MOUNT WALL COVER contained in the product package.
Diagram Description: This diagram shows the final assembly, with the camera securely mounted to the wall using the cover.
Outdoor Installation Waterproofing
When installing the product outdoors, waterproof the cable connection area with waterproof butyl rubber tape (available in stores) to prevent water leakage from the cable gap.
- Connect the PoE cable.
- Wrap the black cable jacket (Area A) and the cable connection area with waterproof butyl rubber tape, ensuring more than half of the tape overlaps.
Important Note: Improper waterproofing of the cable jacket can lead to leakage. Ensure the cable is protected with a dense layer of tape. Waterproof butyl tape is made of butyl rubber and can be stretched to twice its normal length.
Specifications
| Product Name | SBP-125WMW |
|---|---|
| Supported product | QNE-8011R/8021R * Models may be added without notice |
| Color / Material | White / Aluminum, Plastic |
| RAL Code | RAL9003 |
| Product dimensions / weight | 126.46 x 160.03 x 104.49 mm (4.98 x 6.30 x 4.11 "), 425 g (0.94 lb) |
Diagram Description: The diagrams show the dimensions of the wall mount and the different mounting hole configurations for single, double, and square gang boxes.
