Cudy R700 Quick Installation Guide

Connection

This section details the physical connection of the Cudy R700 router.

Diagram Description: The diagram shows a router labeled 'R700' with several ports. A power adapter is connected to the router. An Ethernet cable connects the router's 'Gigabit WAN Port' to a 'Modem', which is connected to the 'Internet'. Another Ethernet cable connects one of the router's 'Gigabit LAN Ports' to a computer.

Note: Use the power adapter provided in the package to power on the router.

Router Ports:

• Reset Button
• 1 Gigabit LAN Port
• 3 Gigabit WAN/LAN Ports
• 1 Gigabit WAN Port
• Power Port

Getting Started

Follow these steps to connect and access your router:

1. Connect a computer to the LAN port of the router with an RJ45 cable. If your computer is configured with a fixed IP, change it to obtain an IP address automatically.

   Diagram Description: A computer is shown connected via an Ethernet cable to the router's LAN port. The router is connected to a switch, which is also connected to the computer.

2. Launch a web browser, and enter http://cudy.net/ or http://192.168.10.1/ in the address bar. Use 'admin' for the password to log in.

   Diagram Description: A screenshot of the Cudy login page is shown, with fields for username (default 'admin') and password, and a 'Log In' button.

   Note: If the login window does not appear, please refer to FAQ > Q1.

3. After a successful login, you can configure the function by clicking the menu on the top of the screen.

   Diagram Description: A screenshot of the router's configuration interface is shown, with tabs for 'System Status', 'General Settings', 'Advanced Settings', and 'Diagnostic Tools'. Sub-sections within 'General Settings' include 'WAN Mode', 'WAN Settings', and 'VPN'.

   • Configure WAN/LAN Ports: General Settings -> WAN Mode
   • Setup Internet Connection: General Settings -> WAN Settings
   • Setup VPN Parameters: General Settings -> VPN

Enjoy the internet! ▶️

LED and Button Indications

Frequently Asked Questions (FAQ)

Q1: What can I do if the login window does not appear?

A1: If the computer is set to a static IP address, change its settings to obtain an IP address and DNS server address automatically.

A2: Verify that http://cudy.net/ or 192.168.10.1 is correctly entered in the web browser.

A3: Use another web browser and try again.

A4: Reboot your router and try again.

A5: Disable and then enable the network adapter being used.

Support

For technical support, the user guide and more information, please visit:

• Email: support@cudy.com
• Driver & Manual: www.cudy.com/download

FCC Statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

GNU General Public License Notice

The software code in this product was created by third parties and is licensed under the GNU General Public License ("GPL"). Cudy makes the corresponding GPL source code available upon request via the official website, either independently or with the assistance of third parties. For GPL-related questions, email support@cudy.com. Cudy offers a GPL-Code-Centre under https://www.cudy.com/gplcodecenter-download where users can get the GPL source codes used in Cudy products for free. The GPL code used in this product is supplied WITHOUT ANY WARRANTY.

EU Declaration of Conformity

Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, (EU) 2015/863 and 2011/65/EU. The original EU declaration of conformity can be found at http://www.cudy.com/ce.

This declaration is provided in multiple languages, including English, German, Spanish, Italian, French, Greek, Dutch, Portuguese, Polish, Turkish, Norwegian, Danish, Finnish, Swedish, Czech, and Slovak.

Compliance and Certification Marks

The device is marked with CE, EAC, and FCC certifications, indicating compliance with relevant European, Eurasian, and United States regulations. It also features RoHS compliance and a recycling symbol, indicating adherence to environmental standards.

Made in China