Avigilon 4-Door Smart Hub Quick Start Guide

What's Included

• 4-Door Smart Hub enclosure
• 4-Door Control Core
• 4-Door Sensing
• Mounting template
• Bracket and push-in fasteners
• 4-Port Expansion Board (multiple included)

Overview

The Avigilon 4-Door Smart Hub is a central component for managing access control for up to four doors. It integrates with the Avigilon Alta Control Center for system management.

1 - Mounting

1. Use the provided paper template to mark and pre-drill holes for the enclosure. Install two fasteners (not included), leaving their heads extended from the wall to act as anchors.
2. Hang the enclosure onto the two fasteners. Tighten the fasteners securely to the wall. Use two additional fasteners (not included) to secure the bottom of the enclosure to the wall.

2 - Installing Components

1. Open the enclosure.
2. Install the expansion board into the enclosure using the included standoffs (quantity 4).
3. Install the Access Control Core below the expansion board using the included bracket. Secure the top of the enclosure using the included fasteners (not included).

3 - Wiring

Warning: Do not apply power during wiring. Ensure the Smart Hub is unplugged until all wiring is complete.

1. Connect the Access Control Core to the Expansion Board using the included USB cable (see diagram 1).
2. Connect the Access Control Core to an Ethernet cable with Internet access (see diagram 2).
3. Connect the Access Control Core and the Expansion Board to the power supply using the included power cables (see diagram 3).

4 - Connecting Avigilon Readers or Wiegand Readers

Connect Avigilon readers or Wiegand readers to the designated ports on the Access Control Core. Note: LCD and BZR connections are not supported.

5 - Connecting Locks or Strikes

Wire fail-safe or fail-secure locks or strikes to the appropriate terminals. A fail-safe lock unlocks when power is lost, while a fail-secure lock remains locked.

6 - Powering the Device

Warning: Do not attempt to wire connections within the Smart Hub while power is enabled.

1. For installations in Europe or requiring a 220VAC power source, cut the jumper on the power supply module.
2. Plug the power cord into a 110VAC or 220VAC power source. An example of a North American power cord and outlet is shown.

7 - Provisioning

To begin provisioning, you will need an Avigilon Alta Control Center user account. Create and register for an account by visiting: https://control.openpath.com/login or https://control.eu.openpath.com/login.

8 - Connecting Devices

Follow the steps within the Avigilon Alta Control Center to connect devices to your organization. In the app, tap 'Devices' at the bottom.

Available for download on the App Store and Google Play.