Bullet 2S Quick Guide
What's in the box
- [Power Adapter]
- [Screws]
- [Pin]
Component Descriptions
| Component | Description |
|---|---|
| Power | DC12V ± 10% |
| Status Light |
|
| Microphone | Captures sound for your video. |
| SD Card Slot | Supports local SD Card storage (Max 128GB). |
| Speaker | Enables two-way audio with the app. |
| Reset | Press and hold for 5 seconds with [pin] to reset the camera to factory defaults. Pressing for 1 second activates manual WiFi setup mode. |
Installation
1. Fix the camera to the wall with [screws].
2. Adjust the camera angle for optimal view.
Connection
App Download
Download the 'SmartLife' or 'Tuya Smart' app, available for both iOS and Android. Search the names in the App Store or Google Play, or scan the [QR Code] for download.
Supports: iOS, Android.
Router Setup
The router must support 2.4GHz WiFi (does not support 5GHz) and be connected to the WiFi network. Record your WiFi's SSID and password.
Ensure network availability.
[2.4GHz WiFi] [5GHz WiFi]
Registration Process
Step 1: Open the Smart Life App, tap 'Sign Up', read the [User Agreement] and [Privacy Policy], then tap 'Agree'.
Step 2: Enter a valid mobile number or email address and tap 'Get Verification Code'. Input the verification code to log in.
QR Code Configuration
1. Create Home: Open the Smart Life App, tap 'My' > 'Home Management' > 'Create a home'. Customize the home name and settings.
2. Add Device: Tap 'Add Device' or [plus icon], then select 'Security & Sensor' > 'Smart Camera' to add the camera.
3. Camera Setup: Power on and reset the camera until the status indicator flashes quickly or a prompt tone is heard. Tap 'Next'. Enter your WiFi password and tap 'Next'. Tap [change network] to switch networks if needed.
Note: Camera only supports 2.4GHz WiFi. SSID and password should not exceed 24 characters.
4. Scan QR Code: In the app interface, scan the [QR Code] on your phone with the camera. You will hear an [audio prompt] when successful. Configuration completes in approximately 30 seconds.
5. Finalize: Ensure your router, mobile, and camera are as close as possible during connection. After the camera is added successfully, tap [edit camera name] to customize its name.
Settings
In the 'Smart Camera' interface, tap the [settings icon] to access and configure common camera functions.
Frequently Asked Questions
Q: The camera cannot be previewed properly?
A: Check if the network is normal. Place the camera closer to the router. If issues persist, reset the camera and add it again.
Q: Why is it still in the list of devices after resetting?
A: Resetting the camera only affects its network configuration, not its presence in the App. Remove the camera from your account and add it again.
Q: How to connect the camera to another router?
A: First, remove and reset the camera in your App account, then configure your camera again via the App.
Q: Why does the camera not identify the SD card?
A: It is recommended to insert the SD card after powering off. Confirm the SD card is functional and formatted as FAT32. The TF card may not be identified in a poor internet environment.
Q: Why do I not receive notifications on my mobile app?
A: Ensure the App is running on the phone and relevant notification functions are enabled. Also, confirm message notifications and permissions in the mobile phone system are enabled.
Key Functions
- Video Flip: Flip your video stream up or down for maximum flexibility.
- Motion Detection: Built-in motion sensors detect movement and send push notifications and app alerts.
- Recording: Supports 24-hour continuous recording with high-capacity SD storage.
- Day & Night Vision: Never miss a moment, even in complete darkness, with powerful night vision technology.
Visuals: The document shows a comparison between 'Daytime View' and 'Night View', illustrating the camera's ability to capture clear images in low-light conditions.
