LENSGO Instruction Manual

List of Accessories

You will receive the following accessories (subject to the options available at the time of your order):

• 1 Handheld light (LENSGO MODEL Retro 15A)
• 2 Silicone Diffusion Dome
• 3 Mobile phone clip (horizontal / vertical)
• 4 Type-C charging cable
• 5 Camera bracket + Hand screw x 2 + Cold shoe mount

Operating Instructions

Product structure diagram:

The diagram shows the handheld light with numbered components:

• 1 Type-C charging port: Charging voltage 5V2A.
• 2 Knob: Turn clockwise to increase light brightness; counterclockwise to decrease. The indicator light displays the brightness percentage.
• 3 Indicator light: Shows blue for normal operation and flashes red for low battery.
• 4 Button: Long press to turn on/off. Double click to enter special effects mode. Click to switch between cold/warm lighting.

Brightness Control: 0-100% adjustable brightness is controlled by the knob (labeled '1' in the diagram). Rotating clockwise increases brightness, and the indicator light shows the corresponding percentage. Rotating counterclockwise dims the light, with the indicator light reflecting the reduced percentage.

Lighting Effects: Access 8 different lighting effects by double-clicking the button (labeled '2' in the diagram).

Color Temperature: Switch between cold and warm lighting by clicking the button (labeled '3' in the diagram).

Battery Level Detection: In the shutdown state, click the button (labeled '2') to check the battery level, which is displayed by the indicator lights showing the current percentage. If none of the lights are on, the device needs charging.

Charging Indicators: After turning on, 4 indicator lights turn blue. If the red light flashes, the device needs to be charged. When charging, the lights illuminate in percentage order, and the blue light remains solid when fully charged.

Visual representations of battery status:

• ⏻ Power on: All 4 indicator lights are blue.
• ⚠️ Please recharge: Red light flashes.
• ? Charging: Lights illuminate in percentage order.
• ✅ Fully charged: Blue light remains solid.

FX Mode

8 different effects are available. Press to switch between them. Double click to exit FX mode after setting up.

• Lightning Mode
• TV Mode
• Bad Bulb Mode
• SOS Mode
• Burst Mode
• Candlelight Mode
• Pulse Flash Mode
• High and Low Beam Bulbs

Bracket Description

The diagram illustrates the camera bracket and its components:

• 1: 1/4 screw hole, compatible with part 5, used to lock the bracket to the light.
• 2: The bracket is bendable and can be used with the cold shoe holder to mount the light on top of a camera.
• 3: With hand screws (part 6), the camera can be mounted to the bracket via a locking mechanism.

Camera Usage

Instructions for mounting the light onto a camera:

• 1: Align the bracket to the bottom of the light and tighten the screw by hand.
• 2: Mount the camera onto the bracket and screw it in by hand.
• 3: The bracket can be expanded to install any equipment with a 1/4 interface, according to your needs.

Before use, please carefully check whether the installation is stable or not.

Mobile Phone Usage

Instructions for mounting the light onto a mobile phone holder:

• 1: Align the bracket to the bottom of the light and tighten the screw by hand.
• 2: Mount the mobile phone holder onto the bracket and screw it in by hand.
• 3: The bracket can be expanded to install any equipment with a 1/4 interface, according to your needs.

Before use, please carefully check whether the installation is stable or not.

Product Overview

The LENSGO 15A is a COB 15W light designed for photography and videography. It features a colour rendering index (CRI) of ≥96, offering accurate color reproduction. Its design incorporates vintage flash styling while providing constant light output. It is versatile and can be used with both mobile phones and cameras.

With Silicone Softbox: The included silicone softbox diffuses the light, providing a soft and pleasant illumination that is not harsh.

0%-100% Brightness Adjustable: The brightness can be precisely adjusted from 0% to 100% using the dedicated adjustment knob.

Specifications

Instructions & Notes

This manual provides information on the proper use and storage of the product and accessories. It assists users in addressing questions about their use and understanding the safety precautions to be taken.

Please Read Carefully

When handing the product over to another person, be sure to include this manual, heed all warnings, and follow all instructions.

2 Year Warranty Description

The warranty applies to all purchasers from authorized dealers and covers defects caused by production or failures during normal use. It excludes physical damage, natural disasters (fire, flood, earthquake, lightning, etc.), chemical corrosion, unauthorized repairs, replacement of components during handling, collisions at the site of installation, and other failures due to human error or force majeure. Any malfunction caused by acts expressly prohibited by the instruction manual is also excluded.

Accessory Description

The mobile phone clip, camera frame, hand screws, and other accessories are considered consumables and are not covered by the 2-year warranty. After use, please check for aging, damage, or other conditions. If you need to replace parts, please contact the dealer.

Maintenance Methods

Please use a soft sponge, soft cloth, or dry cloth to clean the product regularly. Do not use bleach or a wire ball. Wipe clean and keep the product dry.

For more information on LENSGO product features, please visit WWW.lensgo.net.

Warnings

• ⚠️ Do not touch the COB lamp beads with your hands to prevent burning.
• ⚠️ This product is a precision instrument; please avoid dropping it when using it.
• ⚠️ Contact authorized service personnel when repairs are required.
• ⚠️ It is recommended to use original LENSGO cables. Any damage to this product caused by the use of non-original accessories is not covered by warranty.
• ⚠️ Please clean the product with a soft, dry cloth.
• ⚠️ This specification is based on rigorous testing. Design and specifications are subject to change without notice.
• ⚠️ Please keep it in a safe place, read this instruction manual carefully, and observe all precautions.
• ⚠️ Before use, please check whether the installation is stable to prevent accidents during use.
• ⚠️ Please switch off the product after charging to protect the safety and life of the battery. Try not to use it during charging.
• ⚠️ Do not cover the ventilation holes when using the silicone softbox.

Certificate of Conformity

PRODUCT NAME: _________________________

MODEL: _________________________

INSPECTION DATE: _________________________

INSPECTOR: _________________________

(A 'QUALIFIED' stamp is present but excluded as per instructions)

Contact Information

For product support and user guides, please visit https://www.lensgo.net.

Manufacturer: JIAZHIYING PHOTOGRAPHY EQUIPMENT CO., LTD.

Address: Room 201, Building C, No. 8 Fengqi Road, Fucheng'ao Community, Pinghu Subdistrict, Longgang District, Shenzhen, China.

Web: https://www.lensgo.net

Executive Standard: Q/LYJ004-2018

Facebook: Lensgotech