LENSGO RETRO 40H Handheld Light User Manual

Product Overview

The LENSGO RETRO 40H is a COB 40W LED light with adjustable dual color temperature (2700K-7000K) and a high color rendering index (CRI) of ≥96. It features burst flash capabilities and a vintage styling, suitable for constant lighting, mobile phone photography, and camera use.

List of Accessories

You will receive the following accessories (subject to options available at the time of your order):

• 1 Handheld light: The LENSGO RETRO 40H light unit.
• 2 Silicone softbox: A white, flexible silicone dome designed to soften the light output.
• 3 Mobile phone clip (horizontal / vertical): An adjustable clamp that can hold a smartphone, allowing for both portrait and landscape orientations.
• 4 Battery charger: A power adapter with a cable for charging the device's battery.
• 5 Camera bracket (mobile phone holder can be mounted): A metal bracket with mounting points, designed to attach accessories like a phone holder or the light itself to a camera rig.
• 6 Hand screw X2: Two metal screws with large, easy-to-grip heads, used for securing the bracket and other attachments.

Operating Instructions

Product structure diagram:

The light features the following components:

• 1 (On / Off Button): Long press to switch on/off. Double tap to enter FX mode. Push to switch between warm and cold light.
• 2 (Indicator light): Blue light indicates full power. Red light indicates low power.
• 3 (Knob): Turn clockwise to adjust brightness. Turn anti-clockwise to dim. Double-click to enter color temperature mode; adjust cold light clockwise, adjust "ambiguous" light counter-clockwise. Double-click again to exit.
• 4 (DC charging port): Charging voltage 12V 2A.
• 5 (1/4 screw hole): Mountable device with 1/4 thread interface.

Power Detection and Charging

• Detecting power: In the off state, click button 1 to detect the power percentage. If no lights illuminate, please charge the device.
• When charging: A sequential flashing blue light is shown.
• Fully charged: A solid blue light is shown.

FX Mode

8 different effects. Press to switch, double click to exit after setting up.

• Lightning Mode: ⚡
• TV Mode: ?
• Bad Bulb Mode: ?
• SOS Mode: ?
• Burst Mode: ?
• Candlelight Mode: ?️
• Pulse Flash Mode: 〰️
• High and Low Beam Bulbs: ??

Camera and Mobile Phone Usage

Camera Usage

Steps:

• 1: Align the bracket to the bottom of the light first and tighten the screw by hand.
• 2: The camera is set up on the bracket and screwed in by hand.
• 3: Can be expanded to install any equipment with a 1/4 interface according to the use of demand.

Warning: Before use, please carefully check whether the installation is stable or not.

Mobile Phone Usage

Description: Adjustable horizontal/vertical bracket.

Steps:

• 1: Align the bracket to the bottom of the light first and tighten the screw by hand.
• 2: The camera is set up on the bracket and screwed in by hand.
• 3: Can be expanded to install any equipment with a 1/4 interface according to the use of demand.

Warning: Before use, please carefully check whether the installation is stable or not.

Specifications

Instructions & Notes

General Information

This manual provides information on the proper use and storage of the product and accessories, and assists the user in dealing with questions about their use and in understanding the safety precautions to be taken.

Please Read Carefully

When handing the product over to another person, be sure to include this manual, heed all warnings and follow all instructions in the manual.

2 Year Warranty Description

The warranty applies to all purchasers from authorized dealers and covers defects caused by production or failures during normal use. It excludes physical damage, natural disasters (fire, flood, earthquake, lightning, etc.), chemical corrosion, unauthorized repairs, damage during handling, collisions, force majeure reasons, and misuse as prohibited by the manual.

Accessory Description

Mobile phone clip, camera frame, hand screws, and other accessories are consumables and not covered by the 2-year warranty. After use, please check for aging or damage. Contact the dealer in time to buy new parts replacement.

Maintenance Methods

Please use a soft sponge, soft cloth, or dry cloth to clean the product regularly. Do not use bleach, wire ball wipe. Wipe clean and keep the product dry.

For more information on LENSGO product features, please visit www.lensgo.net.

Warnings

• Do not touch the COB lamp beads with your hands to prevent burning.
• This product is a precision instrument; please avoid dropping it when using it.
• Contact authorized service personnel when repairs are required.
• It is recommended to use original LENSGO cables. Any damage to this product caused by the use of non-original accessories is not covered by the warranty.
• Please clean the product with a soft, dry cloth.
• This specification is based on rigorous testing. Design and specifications are subject to change without notice.
• Please keep it in a safe place, read this instruction manual carefully, and observe all precautions.
• Before use, please check whether the installation is stable, to prevent accidents during use.
• Please switch off the product after charging to protect the safety and life of the battery. Do not use it during charging.
• Do not cover the ventilation holes when using the silicone softbox.

Manufacturer Information

JIAZHIYING PHOTOGRAPHY EQUIPMENT CO., LTD.

Address: Room 201, Building C, No. 8 Fengqi Road, Fucheng'ao Community, Pinghu Subdistrict, Longgang District, Shenzhen, China

Web: https://www.lensgo.net/

Executive Standard: Q/LYJ004-2018

Facebook: Lensgotech

Certifications: CE, RoHS, Made in China.