LensGo 40H Portable COB LED Light

User's Manual - Model: 40H

This manual provides information on the proper use and storage of the product and accessories, and assists the user in dealing with questions about their use and in understanding the safety precautions to be taken.

PLEASE READ CAREFULLY

When handing the product over to another person, be sure to include this manual, heed all warnings and follow all instructions in the manual.

2 Year Warranty Description

The warranty covers any defects caused by production, as well as failures in the course of normal use, excluding physical damage, natural disasters, chemical corrosion, unauthorized repairs, replacement of components during handling, collisions, and other failures due to human or force majeure reasons. Any malfunction caused by acts expressly prohibited by the instruction manual is not covered.

Accessory Description

Mobile phone clip, camera frame, hand screws, and other accessories are consumables and are not covered by the 2-year warranty. Please check for aging or damage and contact the dealer for replacement parts if needed.

Maintenance Methods

Please use a soft sponge, soft cloth, or dry cloth to clean the product regularly. Do not use bleach or wire balls. Wipe clean and keep the product dry.

Product Overview

The 40H is a COB 40W light with dual color temperature (2700K-7000K) adjustable, a color rendering index (CRI) greater than 96, burst flash, and a vintage flash styling. It functions as constant light and can be used with mobile phones or cameras.

Key Features:

• 2700K-7000K Dual Colour Temperature: Knob-adjustable infinitely dimmable with high display index to restore true colors.
• With Silicone Softbox: Provides soft light that is not harsh.
• 0%-100% Brightness Adjustable: Brightness can be adjusted by turning the knob.

Specifications:

For more information on LENSGO product features, please visit WWW.lensgo.net.

Operating Instructions

Product Structure Diagram:

The product includes a handheld light, silicone softbox, mobile phone clip (horizontal/vertical), battery charger, camera bracket, and hand screws (x2). The mobile phone holder can be mounted.

Controls:

• On/Off: Long press to switch on/off. Double tap to enter FX mode.
• Push Button: Push to switch between warm and cold light.
• Indicator Light: Blue light when switching on at full power, red light when power is low.
• Knob: Turn clockwise to increase brightness, anti-clockwise to decrease brightness. Double-click the knob to enter color temperature mode. Adjust cold light clockwise and warm light anti-clockwise. Double-click to exit after adjustment.
• DC Charging Port: For charging with a 12V 2A adapter.
• 1/4 Screw Hole: Mountable device with a 1/4 thread interface. Fits and locks bracket to light. Expandable to mount any tripod device with 1/4 screws.

Bracket Description & Usage:

1. Align the bracket to the bottom of the light first and tighten the screw by hand.
2. The camera is set up on the bracket and screwed in by hand.
3. Can be expanded to install any equipment with a 1/4 interface according to usage needs.

WARNING: Before use, please carefully check whether the installation is stable or not to prevent accidents during use.

FX Mode (8 different effects):

Press to switch effects, double-click to exit after setting up.

• TV MODE
• LIGHTNING MODE
• BAD BULB MODE
• SOS MODE
• PULSE FLASH MODE
• BURST MODE
• CANDLELIGHT MODE
• HIGH AND LOW BEAM BULBS

Power Detection:

In the off state, click to detect the power. The current power percentage is displayed. If no lights illuminate, please charge.

Charging Indicator:

When charging, the percentage flashes sequentially. When fully charged, the blue light stays on.

Mobile Phone Usage:

Adjustable horizontal/vertical bracket for mobile phones.

Warnings:

• Keep this product out of the reach of children in a safe place.
• Please use the original parts correctly.
• Before each use, please be sure to check whether the installation is stable to prevent accidents during use.
• Store in a cool, dry place, prohibit exposure to the sun, waterproof.
• Do not touch the COB lamp beads with your hands to prevent burning.
• This product is a precision instrument, please avoid dropping it when using it.
• Contact authorized service personnel when repairs are required.
• It is recommended to use the original LENSGO cables. Any damage caused by non-original accessories is not covered by the warranty.
• Please clean the product with a soft, dry cloth.
• This specification is based on rigorous testing. Design and specifications are subject to change without notice.
• Please keep it in a safe place, read this instruction manual carefully, and observe all precautions.
• Please switch off the product after charging to protect the battery's safety and life. Try not to use it during charging.
• Do not cover the ventilation holes when using the silicone softbox.
• When using, do not shine the light directly into the eyes to prevent eye blurring.

Certificate of Conformity

PRODUCT NAME: 40H

INSPECTION DATE:

INSPECTOR:

QUALIFIED