Instruction Manual

Product Overview

The LENSGO 10B is a versatile COB 5W camera light designed for photography. It features a high colour rendering index (≥96), burst flash capability, and a vintage styling that complements constant lighting setups. This manual provides comprehensive instructions for its use, maintenance, and safety.

List of Accessories

You will receive the following accessories (subject to the options available at the time of your order):

• Retro Light
• Riflettori (Reflector)
• Silicone Diffusion Dome
• Type-C charging cable

[eye protection symbol] When using, do not expose your eyes to light. Prevent blurred vision.

Operating Instructions

Product structure diagram:

The diagram shows the Retro Light with numbered components:

• 1. Indicator light: Displays status. Turns blue when powered on, flashes red for low battery.
• 2. Knob: Used to adjust brightness. Rotate clockwise to increase brightness and counterclockwise to decrease it. The indicator light shows the current brightness percentage.
• 3. Button:
  • Long press to turn on/off.
  • Double click to enter special effects mode.
  • Click to switch between cold/warm lighting.
• 4. Cold shoe seat: For fixing the light onto a camera.
• 5. Type-C charging port: For charging the device (5V/2A).

Brightness and Colour Temperature Adjustment

• 0-100% Adjustable Brightness: Rotate the knob (1) clockwise to increase brightness and counterclockwise to decrease it. The indicator light reflects the percentage.
• Switching Between Cold/Warm Lighting: Click the button (3) to switch instantly between cold and warm lighting.
• 3000K-6500K Colour Temperature Adjustment: Double click the button (3) to enter colour temperature mode. Click to switch between cool and warm light. Double-click again to exit after adjustment is complete.

Battery Status and Charging

• After turning on, the indicator lights (1) turn blue. If the red light flashes, please charge the device.
• When charging, the lights will turn on in percentage order, indicating the charge level. The blue light will remain on when fully charged.

Battery status indicators:

• Power on: Blue indicator light.
• Please recharge: Red light flashes.
• Charging: Percentage lights illuminate sequentially.
• Fully charged: Blue light remains on.

Specifications

Instructions and Notes

This manual provides information on the proper use and storage of the product and accessories, and assists the user in dealing with questions about their use and in understanding the safety precautions to be taken.

Please Read Carefully

When handing the product over to another person, be sure to include this manual, heed all warnings and follow all instructions in the manual.

2 Year Warranty Description

The warranty applies to all purchasers from authorised dealers and covers defects caused by production. It excludes failures from normal use, physical damage, natural disasters (fire, flood, earthquake, lightning, etc.), chemical corrosion, unauthorised repairs, replacement of components during handling, collisions, or other failures due to human or force majeure reasons. Any malfunction caused by acts expressly prohibited by this instruction manual is not covered.

Accessory Description

Items like mobile phone clips, camera frames, and hand screws are considered consumables and are not covered by the 2-year warranty. After use, please check for aging or damage. For convenience, contact the dealer for replacement parts.

Maintenance Methods

Please use a soft sponge, soft cloth, or dry cloth to clean the product regularly. Do not use bleach, wire wool, or abrasive materials. Wipe clean and keep the product dry.

⚠️ WARNING

• Do not touch the COB lamp beads with your hands to prevent burning.
• This product is a precision instrument; please avoid dropping it.
• Contact authorised service personnel when repairs are required.
• It is recommended to use original LENSGO cables. Damage caused by non-original accessories is not covered by warranty.
• Please clean the product with a soft, dry cloth.
• Design and specifications are subject to change without notice.
• Keep the product in a safe place, read this instruction manual carefully, and observe all precautions.
• Before use, check if the installation is stable to prevent accidents.
• Please switch off the product after charging to protect the battery's safety and life. Avoid using it while charging.
• Do not cover the ventilation holes when using the silicone softbox.

Manufacturer and Compliance

Manufacturer: JIAZHIYING PHOTOGRAPHY EQUIPMENT CO., LTD.

Address: Room 201, Building C, No. 8 Fengqi Road, Fucheng'ao Community, Pinghu Subdistrict, Longgang District, Shenzhen, China

Web: https://www.lensgo.net

Executive Standard: Q/LYJ004-2018

Compliance Marks: CE, RoHS

Origin: Made in China

Recycling: Please recycle.

For more information on LENSGO product features, please visit www.lensgo.net and click on the "User Guide" menu.

Certificate of Conformity

PRODUCT NAME: _________________________

MODEL: _________________________

INSPECTION DATE: _________________________

INSPECTOR: _________________________

[Qualified Seal]