V-TAC Emergency Kit Installation Instructions

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.

Technical Data

SKU	Input Voltage	Charging Time	Emergency Power	Emergency Operation Time	Charge and Recharge	Battery Type	Ambient Temperature	Compatible with	Dimension
8343	AC:220-240V, 50/60Hz	24 Hours	6-7W	3 Hours	500 Times	Ni-Cd 9.6V 2200mAh	0-50°C	SKU: 20214 \| 20215, SKU: 20216 \| 20217	212x40x30mm

Warnings

WARNING! Please make sure to turn off the power before starting the installation.
Installation must be performed by a qualified electrician.
The emergency kit is designed with a replaceable battery. If the battery no longer meets their rated duration of operation after corresponding recharge period the battery/emergency kit should be replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Caution, risk of electric shock.

Attention

Please make sure to switch off the power before starting the installation.
Battery is in an empty state, please ensure to charge more than 36 hours before using.
Power connected but light does not work, please check whether the light is properly connected to the mains.
Please strictly use the emergency kit according to the wiring diagram before connection and pay attention to reverse connection.

Emergency Wiring Diagram

The diagram shows the wiring connections for the emergency kit. It includes connections for the LED array, driver, and main power supply (L, N). The diagram illustrates both 'Maintained' and 'Non-Maintained' wiring configurations.

Key components and connections:

LED Array: Connects to the driver.
Driver: Connects to the LED Array and the Emergency Kit.
Emergency Kit: Has connections for the driver, battery (BAT), and main power (L, N).
Main Power: AC 220-240V input, with connections for Live (L) and Neutral (N).
Battery: Ni-Cd 9.6V 2200mAh, with a high-temperature warning.
Wiring options: Maintained (Unswitched Live) and Non-Maintained.

Installation Steps

Step 1: Please make sure to switch off the power before starting the installation. [Power Off Symbol]
Step 2: Open the side clips of the waterproof fitting and open the diffuser as shown in the diagram.
Step 3: Remove the screws from the driver. Remove the Brown wire from terminal L on both ends of the waterproof fitting and reinstall the Brown wire to terminal LS on both ends.
Step 4: Install the Red wire on the terminal (L) from one end to the other end of the terminal block. Using the screws, reinstall the driver on the fitting.
Step 5: Install the iron plate (included) on the fitting using 3 screws (1,2,3 hole for 36W, 1,2,4 hole for 48W).
Step 6: Fix the battery with 4 screws and the Emergency kit with 2 screws on the iron plate.
Step 7: The wire L (Red) of the kit is connected to the main power L (live), the wire N (Blue) of the kit is connected to the main power N (Neutral).
Step 8: Connect the driver plug to the Emergency kit as shown in the diagram.
Step 9: Connect the battery plug.
Step 10: Fix the LED indicator on the holder and connect the LED plug to the Emergency kit as shown in the diagram.
Step 11: For Maintained OR Non-Maintained wiring, please refer to the wiring diagram and power the waterproof fitting accordingly. Fix the diffuser on the waterproof fitting and close the side clips. Turn ON the power to test the light. [Test Symbol]

Disposal Information

This marking indicates that this product should not be disposed of with other household wastes.

Contact Information

For any query/issue with the product, please reach out to us at: SUPPORT@V-TAC.EU

For more products range, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

	V-TAC LED Floodlight with Sensor - Installation Guide Provides detailed installation instructions, safety warnings, and features for V-TAC LED Floodlights with integrated light sensors. Learn how to safely mount and connect your V-TAC floodlight for optimal performance.
	V-TAC LED Strip Lights Instruction Manual Comprehensive guide for installing and connecting V-TAC LED strip lights, including safety precautions, single-color and RGB strip wiring, and cutting instructions.
	V-TAC Hybrid Inverter Quick Installation Guide - PV, Battery, Grid Setup Detailed installation guide for V-TAC hybrid solar inverters (SKUs 11377, 11523, 11524, 11525, 11526). Covers PV, battery, grid, EPS connections, communication, and grounding procedures.
	V-TAC VT-843 Wall Lamp Installation Instructions and Technical Data Official installation guide and technical specifications for the V-TAC VT-843 LED Wall Lamp. Includes safety warnings, warranty details, and step-by-step instructions.
	V-TAC VT-983 Solar LED Stand Light Installation Instructions Detailed installation instructions and technical specifications for the V-TAC VT-983 Solar LED Stand Light, including warranty information and operating modes.
	V-TAC VT-2405 RF LED Controller with Touch Remote - User Manual & Specifications Detailed information on the V-TAC VT-2405 RF Controller with Touch Remote. Includes product description, technical specifications, dynamic modes, remote control functions, and connection instructions for RGB LED strips.
	V-TAC VT-61012 12W LED Recessed Panel 3000K SQ - Product Specifications Detailed specifications for the V-TAC VT-61012 12W Backlit Recessed Panel, featuring 3000K color temperature, 1200 lumens, and IP20 rating. Includes technical details, features, and packaging information.
	V-TAC Battery Compatibility List with Inverters Comprehensive compatibility guide for V-TAC batteries and various inverter brands, detailing integration, communication protocols, and key features for energy storage systems.