Product Description
This RF controller with a touch remote is designed for RGB LED strips, offering sensitive control and a user-friendly experience.
- Adopts Capacitive Touch technology, ultra sensitive.
- Features RF remote control for easy operation of RGB LED strips (e.g., 5050, 3528).
- Allows adjustable brightness, color, and speed to suit different needs.
- Includes a full color wheel for convenient color selection.
- Equipped with auto sleep and wake-up functions for low power consumption and energy conservation.
- Compact size with a long service life.
- Auto memorizing function saves the last setting.
Technical Parameters
| Parameter | Value |
|---|---|
| Working temperature | -20-60°C |
| Supply voltage | DC12V~24V |
| Output | 3 channels |
| Connecting mode | common anode |
| Static power consumption | <1W |
| Output current | <6A (each channel) |
| Output power | 12V < 216W; 24V < 432W |
Dynamic Modes
The available dynamic modes are as follows:
| NO | Mode | NO | Mode | NO | Mode |
|---|---|---|---|---|---|
| 1 | Three-color gradual changing | 7 | Yellow strobe-flash | 13 | Blue cross-fade |
| 2 | Seven-color jumpy changing | 8 | Cyan strobe-flash | 14 | Yellow cross-fade |
| 3 | Seven-color gradual changing | 9 | Purple strobe-flash | 15 | Cyan cross-fade |
| 4 | Red strobe-flash | 10 | White strobe-flash | 16 | Purple cross-fade |
| 5 | Green strobe-flash | 11 | Red cross-fade | 17 | White cross-fade |
| 6 | Blue strobe-flash | 12 | Green cross-fade |
Remote Control Function Instruction
The remote control features several buttons for operation:
| Button Icon/Description | Function |
|---|---|
| [Power Button] (Circle with line) | Switch for power on and off. The left side of the button is OFF & the right side is ON. |
| [Mode + Button] (Circle with four dots) | The top button is Mode + used to go to the next static mode. |
| [Mode - Button] (Circle with four dots) | The bottom button is Mode – used to go back to the previous mode. |
| [Color Wheel] (Circle with color spectrum) | The color wheel is used to change static colors. |
| [Brightness Up Button] (Asterisk symbol) | Used to increase the brightness. |
| [Brightness Down Button] (Asterisk symbol) | Used to decrease the brightness. |
Connection
This section describes how to connect the LED controller to power and LED strips.
Power Input:
- Connect an AC 110-220V power source to the "Input LN+" terminals of a power supply unit.
- The DC 12V-24V output from the power supply unit connects to the "POWER" input terminals (labeled "Power1") on the LED controller.
LED Strip Output:
- The LED controller has terminals labeled "Signal", "BGRV" (typically for Blue, Green, Red, and Voltage +), and "POWER".
- Connect the corresponding wires from your RGB LED strips to the "BGRV" terminals on the LED controller. Ensure correct polarity.
- The diagram shows connections to two separate LED strips.
Diagram Description: The diagram illustrates a power supply unit receiving AC input and providing DC output. This DC output connects to the LED controller's power input. The LED controller then distributes power and signal to two connected LED strips via the "BGRV" terminals.
Caution
- ⚠️ This product's input voltage is DC12V~24V. Other input voltages are not allowed.
- Lead wires should be connected correctly, according to the wire color and the connecting diagram.
- Overloads are prohibited.
