ATUVOS TAG AT2101

Item Tracker

Product Overview

The ATUVOS TAG (AT2101) is an accessory for the Find My network that helps you quickly find the things you're looking for. The Apple Find My network offers an easy and secure way to locate personal items on a map using the Find My app on your iPhone, iPad, iPod touch, Apple Watch, or Mac. Simply pair your ATUVOS TAG with the Apple Find My app to see it alongside your other items. If your item is lost, you can put it in Lost Mode to display a message and contact information for the person who finds it. The Find My network is encrypted and anonymous, so neither Apple nor Atuvos can see your location. The ATUVOS TAG uses Bluetooth Low Energy (BLE) technology and a replaceable battery (CR2032), offering up to 1 year of battery life. Setup is quick and easy. Make your life easier today.

To locate this item, it is recommended to use the Find My app or the Find Items app on Apple Watch, with the latest version of iOS, iPadOS, macOS, or watchOS.

Device Components

Diagram showing the ATUVOS TAG from top and bottom. The top view highlights the 'Button'. The bottom view highlights the 'Battery Cover'.

Factory Reset

Hold the button for approximately 10 seconds until a chime sounds: two beeps separated by 7 seconds, followed by two short beeps. The device is now in pairing mode. All connection data will be erased. You must remove the accessory from the app and then add it again.

Button Action, Beep, and Status Indicators

Button Action	Status	Beep
Quick Press	On	Two short beeps
Hold for ~3 seconds	Off	Long beep
Hold for ~10 seconds	Reset	Two long beeps separated by 7 seconds, followed by two short beeps

Key Features

Range: Up to 400 feet (120m)
NFC Tap for Lost Mode
Voice control with Siri
Loud Sound
Water Resistant
Replaceable Battery
Built-in Privacy
Compact Design

What's in the Box

ATUVOS TAG
Battery (CR2032)
User Manual

Specifications

Battery: CR2032, DC 3V
Firmware Update: OTA (Find My App)
Operating Temperature: 0-40°C
Operating Frequency: 2402~2480MHz Wireless: Bluetooth
Maximum Transmission Power: 8dBm

Quick Start Guide

Update to the latest version of iOS or iPadOS. Enable Bluetooth in Control Center or in Settings > Bluetooth.
Quick press the button to turn on. Keep the device nearby and open the Find My app.
Tap '+', then tap 'Add Other Item' and follow the on-screen instructions.

Screenshot of iOS Control Center with Bluetooth enabled.Screenshot of iOS Home Screen showing app icons: Weather, Find My, Shortcuts, Home.

Firmware Update

To ensure the best possible experience with ATUVOS TAG, we recommend updating firmware whenever updates are available:

Open the Find My app and select the item.
An "Update available" notification will appear when an update is ready.
Tap it and select "Update" to begin.

Screenshot of the 'Items' tab in the Find My app, displaying paired items (key, backpack, bicycle) and an 'Add Item' button.

Replace Battery

The ATUVOS TAG has a replaceable CR2032 battery that lasts up to 1 year. When the battery runs out, you can replace it in 3 steps.

Use your fingernails or insert a smaller tool into the small slot on the side and open the battery cover located on the back of the ATUVOS TAG.
Use a clip to remove the battery, then insert a new one, placing the battery with the positive side facing up.
Close the battery cover by aligning the top hole of both covers.

Diagram illustrating battery replacement: Step 1 shows a finger or small tool being used to pry open the battery cover on the side of the ATUVOS TAG. Step 2 shows a clip being used to remove the old battery, and a new battery being placed with the positive side facing up. Step 3 shows the battery cover being closed by aligning the top holes.

Warnings

The ATUVOS TAG contains a button battery that is dangerous if swallowed. Keep batteries out of reach of small children and pets.
The battery must be removed from the ATUVOS TAG before disposal.
The battery must be disposed of safely.
Using the incorrect battery type can harm people or the accessory.

FCC Declaration

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

IC (Industry Canada) Declaration

The license-exempt transmitter/receiver contained in this device complies with Industry Canada's license-exempt RSS standard(s). Operation is permitted under two conditions: (1) the device must not cause interference; and (2) the device must accept any interference, including interference that may cause undesired operation.

RF Exposure Statement: The equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and used with a minimum distance of 5 mm between the radiator and your body.

CE Declaration

Comet Innovation Limited hereby declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/UE.

Technical Description:

Frequency Range: Bluetooth: 2402 - 2480 MHz
Transmission Power: Bluetooth: 8 dBm EIRP

Legal Notice

The use of the "Works with Apple" badge signifies that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet the specifications and requirements of the Apple Find My Network product. Apple is not responsible for the operation of this device or its use or compliance with safety and regulatory standards.

Credit Lines:

Apple, iPhone, iPad, iPadOS, watchOS, iPod touch, and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

	ATUVOS TAG AT2101 User Manual and Product Information Comprehensive guide to the ATUVOS TAG AT2101, a Bluetooth tracker compatible with Apple's Find My network. Learn about its features, setup, battery replacement, and regulatory compliance.
	ATUVOS AT2301 Tag User Manual and Specifications Comprehensive guide to the ATUVOS AT2301 Tag, a Bluetooth tracker that works with Apple's Find My network. Learn about its features, setup, battery replacement, troubleshooting, and technical specifications.
	ATUVOS TAG AT2101: Localizzatore di Oggetti con Apple Find My Guida completa al TAG ATUVOS AT2101, un localizzatore di oggetti compatibile con Apple Find My. Scopri le funzionalità, le specifiche tecniche, la guida rapida, la sostituzione della batteria e le dichiarazioni di conformità.
	ATUVOS Tag AT2301 User Guide & Features Comprehensive guide for the ATUVOS Tag AT2301, detailing its features, setup with Apple Find My, battery replacement, specifications, troubleshooting, and regulatory information. Supports English, German, Spanish, Italian, and French.
	ATUVOS TAG AT2101 Quick Start Guide This guide provides instructions for setting up and using the ATUVOS TAG AT2101, a Bluetooth tracker compatible with Apple's Find My network. Learn about its features, button actions, battery replacement, and compliance information.
	Vos Tag AT2301 User Manual: Setup, Features, and Troubleshooting This user manual provides comprehensive instructions for the Vos Tag AT2301 item tracker. Learn how to set up, pair with Apple Find My, replace the battery, and troubleshoot common issues. Features include long-distance tracking and left-behind alerts.
	ATUVOS Vos Tag AT2301: Apple Find My Compatible Item Tracker User Guide Learn how to use the ATUVOS Vos Tag (Model AT2301) with Apple Find My for item tracking. This guide covers setup, functions, battery replacement, specifications, and troubleshooting for this water-resistant Bluetooth tracker.
	ATUVOS Slim Tag AT2203: Find Your Items with Apple Find My Discover the ATUVOS Slim Tag AT2203, a waterproof, NFC-enabled Bluetooth tracker designed to work with Apple Find My for easy item location. Learn about its features, setup, and specifications.