Introduction
The ATUVOS Slim Tag works with Apple Find My to help you quickly locate your things even further away. Its thin profile makes it easily slide into tight spaces such as wallets, purses, or pockets, saving space and simplifying your life. This tag is waterproof, NFC-capable, and has a non-replaceable battery that lasts up to 3 years. A simple setup can pair this item tracker with the Find My app on your Apple devices to track down your nearby items by playing a sound. The anonymous and encrypted Find My network also ensures your privacy and safety.
Included in the Box
- ATUVOS Slim Tag
- User Manual
Note: To use the Apple Find My app or the Find Items app on Apple Watch to locate this item, the latest version of iOS, iPadOS, macOS, or watchOS is recommended.
Controls and Status
Diagram of the ATUVOS Slim Tag, illustrating its physical layout with labels for NFC Sensing Area, Speaker, and Power Button.
| Power Button | Status | Buzzer |
|---|---|---|
| Quick Press | Power On | Two Short Beeps |
| Long Press for 3 Seconds | Power Off | Long Beep |
| Long Press for 10 Seconds | Reset* | Two Long Beeps with a 7-second Interval |
*This will restore the tag to factory settings and clear all the connection data. You must remove the item from the Find My app and add it back before using it again.
Functions
Long-distance Tracking
If your item is lost outside the 60-metre Bluetooth range, the Find My network connecting hundreds of millions of Apple devices worldwide will help track your item. All the while, your privacy is protected at every step of the way.
Left-behind Alerts
If your item is left behind and disconnects from the Bluetooth of your Apple device, the Apple Find My app will instantly send you notifications without additional fees.
Discourage Unwanted Tracking
If someone's tag lands on your items, your Apple device will automatically detect that tag and send you an alert to prevent unwanted tracking. If you still can't find it, the tag will make a sound to let you know.
NFC Sensing
This tag is NFC-enabled. If someone finds your lost item tracker, they can get your contact information by tapping the tag with an NFC-capable device, which will help you find your belongings back.
Pair with Find My App
1. Turn on your iOS device's Bluetooth. Make sure your iOS device is in the latest version.
Diagram showing the ATUVOS Slim Tag and an iOS device.
2. Quick press the tag's power button to turn it on and place it near to your iOS device.
Diagram sequence showing the steps to pair the ATUVOS Slim Tag with an iOS device using the Find My app. Step 1 shows Bluetooth enabled on an iOS device. Step 2 shows the tag being placed near the device. Step 3 illustrates opening the Find My app and selecting 'Add Item' > 'Other Supported Item'. Step 4 shows the process for adding subsequent items.
3. Open Find My app, tap "Items" and then "Add Item". Select "Other Supported Item" and follow the in-app instruction to complete pairing.
4. For subsequent pairing with other items, tap "+" and then "Add Other Item" to pair.
Note: To ensure the best user experience, please update the firmware whenever the update is available in Find My app.
Specifications
| Dimensions | 85.5*54*2.4 mm |
| Weight | 13 g |
| Range | Up to 200 ft (60 m) |
| Battery | Li-MnO2 Thin Cell, DC 3V |
| Frequency | 2402~2480 MHz |
| Working Temperature | 0~40°C (0~104°F) |
| Transmit Power | 4 dBm |
| Connectivity | Bluetooth ? |
| Compatibility | iOS Devices |
| Firmware Update | Find My app |
| Voice Control | Siri |
Troubleshooting
1. Fail to add Slim Tag to the Find My app.
- a. Make sure the tag is powered on and near to the device.
- b. Make sure your iOS device is in the latest version and the Bluetooth is on.
- c. Make sure the tag has not been paired with the Find My app on other iOS device.
- d. If you follow the previous steps and still fail to add, long press the tag's power button for 10 seconds to reset and then try again.
2. Slim Tag cannot function well.
- a. Check if the battery level is low. If the battery reaches its limit, you need to replace this tag with a new one.
If you have any further questions, please contact us: support@atuvos.com
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- --Reorient or relocate the receiving antenna.
- --Increase the separation between the equipment and receiver.
- --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- --Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement: This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC Statement
The licensed transmitter/receiver contained in this device is compliant with Innovation, Science and Economic Development Canada's RNC for licensed radio devices. The operation is permitted under two conditions: 1. The device must not cause interference; 2. The device must accept any radio interference, even if the interference is likely to compromise its operation.
RF Exhibition Statement: The equipment complies with the IC radiation exposure limit established for an uncontrolled environment. This equipment must be installed and used with a minimum distance of 5 mm between the radiator and your body.
CE Statement
Hereby, Comet Innovation Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
Technical Description: Bluetooth Frequency Range: 2402 - 2480 MHz, Bluetooth Transmit Power: 4 dBm EIRP
Legal Notice
Use of the "Works with Apple" badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Credit Lines
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc., registered in the U.S. and other countries. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
