One For All WM2241 Quick Installation Guide

Product Information

Congratulations on the purchase of this One for All product! The product is made of durable materials and is based on a design where every detail has been meticulously thought out. One for All provides a 10-year guarantee for defects in materials or manufacturing.

Model: WM2241

Product Type: Smart Wall Mount

Supported Screen Size: Up to 43 inches

Maximum Load Capacity: 30 kg

VESA Compatibility: 75x75, 100x100, 200x100, 200x200

Included Components:

• Wall Mount (A)
• Cable Clip (B)
• 6mm Allen Key (C)
• M6/M8 Wrench (D)
• Mounting Hardware Package M (M4x14 screws, M5x14 screws, M6x14 screws, D5 washers, M8x20 screws, small spacers, D6 washers)
• Mounting Hardware Package W (ST6.3x55 screws, concrete anchors)

Installation Instructions

Step 1: Mounting the Wall Plate

Mark the desired position on the wall. Ensure the wall is suitable for the provided mounting hardware. Drill holes according to the template (if provided) or measurements. Insert wall anchors if necessary (for concrete or brick walls). Attach the wall plate (A) to the wall using the appropriate screws and washers (e.g., W-A, W-B).

Step 2: Attaching the Brackets to the TV

Identify the correct screws (M-A, M-B, M-C) and spacers (M-G) for your TV's VESA mounting holes. Attach the brackets to the back of the TV using the provided screws and washers (e.g., M-A, M-D, M-E, M-F).

Step 3: Hanging the TV on the Wall Plate

Carefully lift the TV and hook the brackets onto the wall plate. Ensure the TV is securely attached.

Step 4: Securing the TV and Cable Management

Use the provided safety screws or locking mechanism to secure the TV to the wall plate. Attach the cable clip (B) to manage cables.

Step 5: Adjustments

Adjust the tilt angle of the TV as needed (typically +/- 15 degrees). Rotate the TV for optimal viewing angles (up to 180 degrees if applicable).

FINISH

Important Warnings

• Verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
• Ensure correct installation. Installation is the user's responsibility and falls outside the scope of One for All's responsibility.
• Fastening materials provided are intended for installation on walls made of solid wood, bricks, concrete, or solid-wood columns with a maximum of 3 mm wall finishing. For walls made of other materials (e.g., hollow bricks), consult your installer and/or specialist supplier.
• Always follow the installation and use instructions of the apparatus to be installed/fixed (e.g., the LCD/plasma screen).

Guarantee Terms and Conditions

One for All guarantees the product against defects in materials or manufacturing for 10 years. The guarantee does not cover normal wear and tear. To claim the guarantee, the product must be sent to One for All with the original proof of purchase. The guarantee is void if the product is not installed and used according to the instructions, if it has been altered or repaired by unauthorized parties, or if faults arise due to external causes (lightning, water damage, fire, scratches, extreme temperatures, weather conditions, solvents, acids, misuse, or negligence).

Contact Information

Universal Electronics BV, Colosseum 2, 7521 PT Enschede, The Netherlands

For support and more information, visit: www.oneforall.com/documents

Connect with One For All:

• facebook.com/oneforall.worldwide
• linkedin.com/company/one-for-all-worldwide/
• youtube.com/user/oneforallproducts