Quick Reference Manual

Step 1: year, date, time setting

1. Pull out the isolated strip; the machine will automatically turn on and immediately enter the shutdown state.
2. Press the black setting button beside the battery with the battery back cover for 2 seconds.
3. Find the flashing "YEAR" and click the query button until the desired year is displayed.
4. Repeat STEP 2~3 to successively set month, day, hour, and minute.
5. When the desired minute is chosen, press the black setting button again.
6. The screen displays "OFF", indicating the setup is complete.

Step 2: check the memory records

Step 1: With the meter off, press the query button ▶️ to turn on the meter.

Step 2: Press the query button ▶️ to display the 7-day average. By repeating this step, you can check the average values of 14-day / 30 days.

Step 3: Press the query button ▶️ to check previous test results starting from the most recent test.

Example Records:

• 88-8888:88 Code mg/dL
• 01 12-08 12:06 Code mg/dL
• 108 mg/dL
• 108 mg/dL
• 92 mg/dL
• 2-18 1:08 mg/dL

EASY TO USE Start with only 5 steps

1. Make sure the isolated strip is removed and the machine is off and the battery is installed correctly. ⚙️
2. Make sure the device is off, then insert the strip with the blue surface facing up into the meter. ⬆️
3. See the flashing drop. If you do not find the flashing drop, ensure the meter is off before inserting the test strip. ?
4. Touch the drop to the tip of the application zone of the test strip until you hear a "beep" sound. Do not apply blood on the top surface of the test strip. ?
5. Get result in 6 seconds. ⏱️