Auvon DS-W1001002 High-Tech Blood Sugar Test Kit

HOW TO CHECK THE MEMORY RECORDS

Step 1: Year, Date, Time Setting

• Step 1: Pull out the isolated strip. The meter will automatically turn off and immediately enter the shutdown state.

  [Image: Hand pulling out a test strip from the meter.]

• Step 2: Press the black setting button [⚙️] on the side of the battery compartment cover for 3 seconds.

  [Image: Back of the meter with the battery compartment open.]

• Step 3: Find the flashing "YEAR" and click the query button [▶️] until the desired year is displayed.

  [Image: Meter display showing "year" flashing.]

• Step 4: Repeat Step 2-3 to successively set the month, day, hour, and minute.

  [Image: Meter display showing options to set month, day, hour, and minute.]

• Step 5: When the desired minute is chosen, press the black setting button [⚙️] again.

  [Image: Meter display showing the minute flashing.]

• Step 6: The screen displays off, indicating the setup is complete.

  [Image: Meter display is off.]

Step 2: Check the Memory Records

• Step 1: With the meter off, press the query button [▶️] to turn on the meter.

  [Image: Meter display showing test results and date.]

• Step 2: Press the query button [▶️] to display the 7-day average. By repeating this step, you can also view the average values of 14 days / 30 days.

  [Image: Meter display showing "7-day average".]

• Step 3: Press the query button [▶️] to check previous test results starting from the most recent.

  [Image: Meter display showing previous test results.]

EASY TO USE: Start with only 5 steps

1. Make sure the isolated strip is removed and the machine is off, and the battery is installed correctly.

   [Image: Blood glucose meter and a battery.]

2. Make sure the device is off, then insert the strip with the blue surface facing up into the meter. PUSH.

   [Image: Test strip being inserted into the meter, with a 'PUSH' indicator.]

3. See the flashing drop. If you do not find the flashing drop, ensure the meter is off before inserting the test strip.

   [Image: Meter display showing a flashing drop symbol indicating readiness for blood application.]

4. Touch the drop to the tip of the application zone of the test strip until you hear a "beep" sound. Do not apply blood on the top surface of the test strip.

   [Image: Blood being applied to the tip of the test strip.]

5. Get result in 6 seconds.

   [Image: Meter display shows the test result.]