Dreame T10 Cordless Vacuum Cleaner User Manual

Safety Instructions

To prevent accidents including electric shock or fire caused by improper use, please read this manual carefully before use and retain it for future reference.

Warning

• This product can be used by children aged from 8 years and above and persons with physical, sensory, intellectual deficiencies, or limited experience or knowledge under the supervision of a parent or guardian to ensure safe operation and to avoid any risk of hazards. Cleaning and maintenance shall not be made by children without supervision.
• The vacuum is not a toy. Children shall not play with or operate this product. Please exercise caution when using the vacuum near children. Do not allow children to clean or maintain the vacuum unless supervised by a parent or guardian.
• Do not use the vacuum outdoors or on wet surfaces. Only use the vacuum on dry indoor surfaces. Do not touch the plug or any part of the vacuum with wet hands.
• To reduce the risk of fire, explosion, or injury, check to make sure the lithium battery and charging adapter are undamaged before use. Do not use the vacuum if either the lithium battery or charger is damaged.
• The multi-brush bar, battery, metal connector pin, and vacuum are electrically conductive and should not be immersed in water or other liquid. Make sure to dry all filters after cleaning.
• Prevent injury caused by moving parts. Turn off the vacuum before cleaning the multi-brush bar. The multi-brush bar, dust compartment and filter must all be properly installed before using the vacuum.
• Only use the original charging adapter. Never use an unoriginal adapter, as this may cause the lithium battery to catch fire.
• Do not use the vacuum to pick up flammable or combustible liquids, such as gasoline, or bleach, ammonia, drain cleaners or other liquids.
• Do not use the vacuum to pick up sharp or hard objects, such as glass, nails, screws, or coins, which may damage the machine. Do not use the vacuum to pick up drywall particles, ashes like fireplace ash, or smoking or burning materials such as coal, cigarette butts or matches.
• Check the area to be cleaned before use. To prevent the openings from being blocked, clear the larger paper, spitball, plastic cloth or sharp objects (such as glass, nails, screws, coins, etc.) and any object which is larger than openings.
• Keep hair, loose clothing, fingers and other parts of the body away from the vacuum's openings and moving parts. Do not point the hose, wand or tools at your eyes or ears or put them in your mouth.
• Do not put any object into the vacuum's openings. Do not use the vacuum with any opening blocked. Keep free of dust, lint, hair, or other items which may reduce airflow.
• Do not rest the vacuum against a chair, table, or other unstable surface, as this may cause damage to the machine or personal injury. If the vacuum becomes damaged from being knocked over or is otherwise malfunctioning, please contact the authorized service department. Never attempt to disassemble the device on your own.
• All instructions in the manual for recharging the battery must be strictly followed. Failure to properly charge the battery within the specified temperature range could damage the battery.
• Please be extra careful when using the vacuum to clean stairs.
• Make sure the vacuum is unplugged when not used for extended periods as well as prior to performing any maintenance or repairs.
• Do not install, charge, or use this product outdoors, in bathrooms, or around a pool.
• Fire Hazard Warning: Do not apply any type of fragrance to the vacuum's filter. These types of products are known to contain flammable chemicals which may cause the vacuum to catch fire.
• This product is designed for home use only.
• Only use the original charger (Model YLS0251B-E300080 (EU) / YLS0241A-A300080 (AU)). Failing to do so may cause the lithium-ion battery to catch fire.
• Only use the approved battery type (Model P2010-7S1P-BW). Failing to do so may cause the lithium-ion battery to catch fire.
• Dreame Trading (Tianjin) Co., Ltd., hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: www.dreame-technology.com

Product Overview

Component Names

Image of the Dreame T10 Cordless Vacuum Cleaner, showing the main unit, extension wand, and floor head with labeled components:

• Antistatic Contact
• Electronic Lock: Press briefly to switch between discontinuous/continuous cleaning modes when the vacuum is running.
• Lock Indicator
• Suction Level Switch (Eco, Med, Turbo)
• Extension Rod Release Button
• Charging Port
• LED Battery Status Indicator
• Battery Release Button
• On/Off Switch: Press to turn on, release to turn off.
• Dust Cup
• Dust Cup Bottom Cover Release Button
• Extension Rod
• Multi-Brush Bar
• Brush Bar Head Release Button

Accessories

The following accessories are included:

• Charger
• Extension Hose
• Crevice Nozzle
• 2-in-1 Brush Nozzle
• Extension Rod
• 2-in-1 Charging & Storage Mount (includes screws x2, wall plugs x2, and mounting template sticker)
• Multi-Brush Bar
• Mini Electric Brush

Note: The images in this manual are for illustrative purposes only. The actual product may differ.

Installation

Vacuum Installation Diagram

Diagram showing the connection of the main unit to the extension rod (indicated by a 'click' sound), and the extension rod to the floor head (indicated by a 'click' sound).

Accessories Installation Diagram

Diagram showing the connection of various accessories to the main unit or extension rod, indicated by 'click' sounds.

2-in-1 Charging & Storage Mount Installation Diagram

The 2-in-1 charging & storage mount is an optional accessory.

1. Install the mount in a cool, dry place with an electrical outlet nearby. Ensure no electrical wires or pipes are behind the installation area.
2. The bottom of the mounting template sticker should be level and at least 103cm from the ground, with at least 30cm clearance above it.
3. Use a power drill with an 8 mm drill bit to drill holes at each marker on the template, then insert wall plugs.
4. Align the mount holes with the wall holes and fasten with the included screws.

Diagram illustrating the mounting process with dimensions (103cm height, 30cm clearance) and screw placement.

Charging

Fully charge the vacuum before first use. A full charge takes approximately 3.5 hours. Using Turbo mode for extended periods can cause the battery to heat up, increasing charging time. Allow the vacuum to cool down for 30 minutes before charging if it has been used in Turbo mode.

Charging Methods

• Charging the vacuum with the charger connected to the main unit.
• Charging the vacuum on the charging mount.

LED Battery Status Indicator

• Status:
• Low battery: One light illuminated
• Half battery: Two lights illuminated
• Nearly full: Three lights illuminated
• Fully charged: All lights illuminated
• Indicator state:
• Off: Power is off
• Blinking: Charging
• On: Fully charged

Note: Once fully charged, the indicator will turn off after 5 minutes, and the vacuum enters energy-saving mode.

How to Use

Working Methods

Select from two working methods:

1. Method 1: Discontinuous Cleaning Mode
   Press and hold the on/off switch to power on, and release it to stop immediately.
2. Method 2: Continuous Cleaning Mode (Electronic Lock)
   When the vacuum is running, click the electronic lock to switch to Continuous Cleaning Mode. Release the on/off switch to maintain continuous cleaning. This frees your fingers and avoids fatigue.

Note: In Continuous Cleaning Mode, the lock indicator will illuminate steadily. Click the electronic lock again to quit this mode.

Using Different Accessories

• Multi-Brush Bar: Suitable for vacuuming medium/short pile carpets, tiles, and floors. Note: Can be attached directly to the vacuum.
• 2-in-1 Brush Nozzle: For vacuuming curtains, keyboards, ceilings, sofas, vehicle interiors, coffee tables, etc.
• Mini Electric Brush: For vacuuming dirt, pet hair, and other stubborn debris from sofas, bedding, and fabric surfaces. Note: Not recommended for fragile surfaces like silk.
• Crevice Nozzle: Suitable for vacuuming cracks, corners of doors and windows, stairs, and other hard-to-reach places.
• Extension Hose: Suitable for cleaning hard-to-reach corners such as drawers, vehicle interiors, and sofa bottoms.

Note: If a rotating part becomes stuck, the vacuum may shut off automatically. Remove any trapped foreign objects, then resume use. If the battery overheats, the vacuum will automatically shut off; wait for the battery temperature to return to normal before resuming use.

Care & Maintenance

Tips

• Always use genuine parts to maintain warranty validity.
• If a filter or nozzle becomes clogged, the vacuum may stop working shortly after being turned on. Clear the tube to restore functionality.
• If the vacuum is not used for an extended period, fully charge it, unplug its charger, and store it in a cool, low-humidity environment away from direct sunlight. To avoid over-discharging the battery, recharge it at least once every three months.

Cleaning the Vacuum

Wipe the vacuum with a soft dry cloth.

Cleaning the Dust Cup, Pre-Filter, and Cyclone Assembly

Cleaning ability is reduced if the dust cup is filled to the “MAX” mark. Empty the dust cup promptly. Ensure the vacuum is disconnected from power and the power button is not pressed before emptying.

1. Press the dust cup bottom cover release button and empty the contents.
2. Push the dust cup release switch in the indicated direction [arrow right] and gently remove the dust cup from the vacuum.
3. Remove the pre-filter first. Lift the handle of the cyclone assembly, turn it counterclockwise until it stops, then pull to lift it out.
4. Rinse the cyclone assembly, pre-filter, and dust cup until clean. Air dry for at least 24 hours [sun icon] [24 hours clock icon].

Note:

• It is recommended to clean the dust cup once every month.
• It is recommended to clean the pre-filter at least once every 3 months and the cyclone system at least once every 6 months.

Installing the Dust Cup, Pre-Filter, and Cyclone Assembly

1. Insert the cyclone assembly vertically into the dust cup. Ensure the handle aligns with the slot on the left side of the dust cup. Turn the handle clockwise until it locks, then flip the handle down.
2. Place the pre-filter with its front side facing up into the cyclone assembly.
3. Slightly tilt the dust cup so the slot aligns with the clip on the vacuum. Gently push the dust cup until it clicks into place.

Cleaning the HEPA Filter

It is recommended to clean the HEPA filter once every 4 to 6 months.

1. Remove the dust cup as shown in the figure.
2. Remove the HEPA filter from the vacuum by pulling it down in the direction shown [arrow down].
3. Clean the HEPA filter with clean water. Rotate the HEPA filter 360° to thoroughly remove dust. Lightly tap the filter several times to remove excess dirt.
4. Allow the HEPA filter to air dry for 24 hours [sun icon] [24 hours clock icon].

Note:

• Only use clean water to wash the filter. Do not use detergent.
• Do not attempt to clean the HEPA filter with a brush or finger.

Installing the HEPA Filter

1. Insert the HEPA filter into the vacuum and gently press down, as illustrated.
2. Reinstall the dust cup.

Cleaning the Multi-Brush Bar

1. Turn the lock counterclockwise until it stops, then remove the roller brush from the brush bar.
2. Use scissors [scissors icon] to cut off hairs and fibers stuck on the brush bar head. Wipe dust from the notch and transparent cover with a dry cloth or paper towel. Thoroughly dry before use.
3. When dirty, rinse the roller brush with clean water until clean.
4. Stand the roller brush upright for at least 24 hours until fully dry.

Cleaning the Mini Electric Brush

1. Use a coin [coin icon] as illustrated to rotate the lock counterclockwise until a click is heard.
2. After unlocking the roller brush, remove it from the mini electric brush, then rinse and clean the brush head.
3. Stand the roller brush upright in a well-ventilated area for at least 24 hours until fully dry.
4. Once dry, reinstall the mini roller brush by following the disassembly steps in reverse.

Battery Pack

The vacuum contains a removable rechargeable lithium-ion battery pack with a limited number of recharge cycles. After extended use, the battery pack may no longer hold a charge, indicating it has reached the end of its life cycle and needs replacement.

1. Press the battery pack release button and slide the battery pack to the right [arrow right] to remove it.
2. Install the new battery pack.

Specifications

Vacuum Cleaner

Mini Electric Brush

Multi-Brush Bar

Charger

Rechargeable Lithium-Ion Battery Pack

FAQ

If the vacuum is not working properly, please refer to the table below:

WEEE Information

The lithium-ion pack contains substances that are hazardous to the environment. Before disposing of the vacuum, please remove the battery pack, then discard or recycle it in accordance with local laws and regulations of the country or region it is used in.

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.

Documents / Resources

• dreame T10 Cordless Vacuum Cleaner [pdf] User Manual
• T10, Cordless Vacuum Cleaner

References

• Smart Robot Vacuum Cleaners | Dreame Official Site
• PayPal

Related Manuals / Resources

• JENSEN JCR-255 Radio Despertador Digital AM FM con Vibrador Debajo de la Almohada User Manual
• JCR-255 Radio Despertador Digital AM FM con Vibrador Debajo de la Almohada Radio Despertador Digital AM/FM con Vibrador...
• KORG Sound Link User Guide: Sound Link MW-2408 MW-1608 HYBRID ANALOG/DIGITAL MIXER Guía de inicio rápido Puede descargar el Manual del usuario en...
• jura 583W Cool Control 1 I Advanced Cool Control Instruction Manual: _pdf583W Cool Control 1 I Advanced Cool Control de en fr it nl es pt Cool Control 1...
• STRONG SRT 82 Terrestrial HDMI Receiver For TV User Manual: SRT 82 Terrestrial HDMI Receiver For TV Terrestrial HDMI Receiver for your TV SRT 82 Picture similar User...

Leave a comment

Your email address will not be published.