Dreame T10 Cordless Vacuum Cleaner User Manual

Safety Instructions

Warning ⚠️

• This product can be used by children aged from 8 years and above and persons with physical, sensory, intellectual deficiencies, or limited experience or knowledge under the supervision of a parent or guardian to ensure safe operation and to avoid any risk of hazards. Cleaning and maintenance shall not be made by children without supervision.
• The vacuum is not a toy. Children shall not play with or operate this product. Exercise caution when using the vacuum near children. Do not allow children to clean or maintain the vacuum unless supervised by a parent or guardian.
• Do not use the vacuum outdoors or on wet surfaces. Only use the vacuum on dry indoor surfaces. Do not touch the plug or any part of the vacuum with wet hands.
• To reduce the risk of fire, explosion, or injury, check that the lithium battery and charging adapter are undamaged before use. Do not use the vacuum if either the lithium battery or charger is damaged.
• The multi-brush bar, battery, metal connector pin, and vacuum are electrically conductive and should not be immersed in water or other liquid. Ensure all filters are dried after cleaning.
• Prevent injury caused by moving parts. Turn off the vacuum before cleaning the multi-brush bar. The multi-brush bar, dust compartment, and filter must all be properly installed before using the vacuum.
• Only use the original charging adapter. Never use an unoriginal adapter, as this may cause the lithium battery to catch fire.
• Do not use the vacuum to pick up flammable or combustible liquids, such as gasoline, bleach, ammonia, or drain cleaners.
• Do not use the vacuum to pick up sharp or hard objects, such as glass, nails, screws, or coins, as they may damage the machine. Do not use the vacuum to pick up drywall particles, ashes (like fireplace ash), or smoking or burning materials (such as coal, cigarette butts, or matches).
• Check the area to be cleaned before use. To prevent openings from being blocked, clear away larger paper, spitballs, plastic cloth, or sharp objects (such as glass, nails, screws, coins, etc.) and any object larger than the openings.
• Keep hair, loose clothing, fingers, and other body parts away from the vacuum's openings and moving parts. Do not point the hose, wand, or tools at your eyes or ears, or put them in your mouth.
• Do not insert any object into the vacuum's openings. Do not use the vacuum with any opening blocked. Keep openings free of dust, lint, hair, or other items that may reduce airflow.
• Do not rest the vacuum against a chair, table, or other unstable surface, as this may cause damage to the machine or personal injury. If the vacuum becomes damaged from being knocked over or is otherwise malfunctioning, contact the authorized service department. Never attempt to disassemble the device yourself.
• Follow all instructions in the manual for recharging the battery strictly. Failure to properly charge the battery within the specified temperature range could damage the battery.
• Be extra careful when using the vacuum to clean stairs.
• Ensure the vacuum is unplugged when not used for extended periods, and prior to performing any maintenance or repairs.
• Do not install, charge, or use this product outdoors, in bathrooms, or around a pool.
• Fire Hazard Warning: Do not apply any type of fragrance to the vacuum's filter. These products may contain flammable chemicals that could cause the vacuum to catch fire.
• This product is designed for home use only.
• Only use the original charger (Model YLS0251B-E300080 (EU) / YLS0241A-A300080 (AU)). Failure to do so may cause the lithium-ion battery to catch fire.
• Only use the approved battery type (Model P2010-7S1P-BW). Failure to do so may cause the lithium-ion battery to catch fire.
• Dreame Trading (Tianjin) Co., Ltd. declares that this equipment complies with applicable Directives and European Norms. The full text of the EU declaration of conformity is available at: www.dreame-technology.com

Product Overview

Component Names

The main unit of the Dreame T10 Cordless Vacuum Cleaner includes:

• Antistatic Contact
• Electronic Lock: Press briefly to switch between discontinuous/continuous cleaning modes when the vacuum is running.
• Lock Indicator
• Suction Level Switch (Eco, Med, Turbo)
• Extension Rod Release Button
• Charging Port
• LED Battery Status Indicator
• Battery Release Button
• On/Off Switch: Press to turn on, release to turn off.
• Dust Cup
• Dust Cup Bottom Cover Release Button
• Extension Rod
• Multi-Brush Bar

The following accessories are included:

• Charger
• Extension Hose
• Crevice Nozzle
• 2-in-1 Brush Nozzle
• Extension Rod
• 2-in-1 Charging & Storage Mount (Includes screws ×2, wall plugs ×2, and mounting template sticker)
• Multi-Brush Bar
• Mini Electric Brush

Note: The images in this manual are for illustrative purposes only. The actual product may differ.

Installation

Vacuum Installation Diagram

Diagram shows the main unit connecting to the extension rod, which then connects to the multi-brush bar. Each connection point is indicated with a "click" sound or visual cue.

Accessories Installation Diagram

Diagram illustrates how various accessories (extension hose, crevice nozzle, 2-in-1 brush nozzle) connect to the main unit or extension rod.

2-in-1 Charging & Storage Mount Installation Diagram

The 2-in-1 charging & storage mount is an optional accessory.

1. Install the mount in a cool, dry place with an electrical outlet nearby. Ensure there are no electrical wires or pipes behind the installation area.
2. The bottom of the mounting template sticker should be level and at least 103cm from the ground. The top should have at least 30cm* of clearance above it. (*30cm: Leave enough space for potential future battery replacement.)
3. Use a power drill with an 8 mm drill bit to drill holes into each marker on the mounting template sticker, then insert wall plugs.
4. Align the mount's holes with the wall holes and fasten it with the included screws.

Diagram shows the charging mount being attached to a wall, with dimensions indicating 103cm from the ground and 30cm clearance above.

Charging

Fully charge the vacuum before using it for the first time.

Note: A full charge takes approximately 3.5 hours. Using Turbo mode for extended periods can cause the battery to heat up, increasing charging time. Allow the vacuum to cool down for 30 minutes before charging.

Charging Methods

Diagrams illustrate two charging methods: charging the vacuum directly with the charger, and charging the vacuum on the charging mount.

LED Battery Status Indicator

The indicator lights show the battery level:

• Low battery: 1 light
• Half battery: 2 lights
• Nearly full: 3 lights
• Fully charged: All 4 lights

Indicator status:

• Off: The vacuum is off.
• Blinking: The vacuum is charging.
• On: The vacuum is on.

Note: Once the vacuum is fully charged, the indicator will turn off after 5 minutes, and the vacuum will enter energy-saving mode.

How to Use

Working Methods

Select from two working methods:

• Method 1: Discontinuous Cleaning Mode
  Press and hold the on/off switch to power it on, and release it to stop immediately.
• Method 2: Continuous Cleaning Mode (Electronic Lock)
  When the vacuum is running, click the electronic lock to switch to Continuous Cleaning Mode. Then release the on/off switch. The electronic lock frees your fingers and avoids fatigue from holding the switch.

Note: In this mode, the lock indicator will illuminate steadily. Click the electronic lock again to quit Continuous Cleaning Mode.

Using Different Accessories

• Multi-Brush Bar: Suitable for vacuuming on medium/short pile carpets, tiles, and floors.
• 2-in-1 Brush Nozzle: For vacuuming curtains, keyboards, ceilings, sofas, vehicle interiors, coffee tables, etc.
• Mini Electric Brush: For vacuuming dirt, pet hair, and other stubborn debris from sofas, bedding, and other fabric surfaces.
• Crevice Nozzle: Suitable for vacuuming cracks, corners of doors and windows, stairs, and other hard-to-reach places.
• Extension Hose: Suitable for cleaning hard-to-reach corners such as drawers, vehicle interiors, sofa bottoms, etc.

Note: It is not recommended to vacuum on fragile surfaces, such as silk.

Note: If any rotating part becomes stuck, the vacuum may shut off automatically. Remove any trapped foreign objects, then resume use. When the battery becomes overheated, the vacuum will automatically shut off. Wait until the battery temperature returns to normal, then resume use.

Care & Maintenance

Tips

• Always use genuine parts to keep your warranty valid.
• If the filter or nozzle becomes clogged, the vacuum will stop working shortly after being turned on. Clear the tube to restore functionality.
• If the vacuum is not used for an extended period, fully charge it, unplug its charger, and store it in a cool, low-humidity environment away from direct sunlight. To avoid over-discharging the battery, recharge the vacuum at least once every three months.

Cleaning the Vacuum

Wipe the vacuum with a soft dry cloth.

Cleaning the Dust Cup, Pre-Filter, and Cyclone Assembly

The vacuum's cleaning ability is reduced if the dust cup is filled to the “MAX” mark. To regain performance, empty the dust cup promptly. Before emptying, ensure the vacuum is disconnected from power and do not press its power button.

1. Press the dust cup bottom cover release button, then empty the contents.
2. Push the dust cup release switch in the direction indicated by the arrow ➡️, then gently remove the dust cup from the vacuum.
3. Remove the pre-filter first, then lift the handle of the cyclone assembly and turn it counterclockwise ↺ until it stops, then pull to lift out the cyclone assembly.
4. Rinse the cyclone assembly, pre-filter, and dust cup until clean. After washing, air dry for at least 24 hours.

Note:

• It is recommended to clean the dust cup once every month.
• It is recommended to clean the pre-filter at least once every 3 months and the cyclone system at least once every 6 months.

Installing the Dust Cup, Pre-Filter, and Cyclone Assembly

1. Insert the cyclone assembly vertically into the dust cup, ensuring the handle aligns with the slot on the left side of the dust cup. Turn the handle clockwise ↻ until it locks, then flip the handle down.
2. Place the pre-filter with its front side facing up into the cyclone assembly.
3. Slightly tilt the dust cup so the slot aligns with the clip on the vacuum. Then gently push the dust cup until it clicks into place.

Cleaning the HEPA Filter

It is recommended to clean the HEPA filter once every 4 to 6 months.

1. Remove the dust cup as shown in the figure.
2. Remove the HEPA filter from the vacuum by pulling it down in the direction shown.
3. Clean the HEPA filter with clean water. Rotate the HEPA filter 360° to thoroughly remove all dust. Lightly tap the filter several times to remove excess dirt.
4. Allow the HEPA filter to air dry for 24 hours.

Note:

• Only use clean water to wash the filter. Do not use detergent.
• Do not attempt to clean the HEPA filter with a brush or finger.

Installing the HEPA Filter

1. Insert the HEPA filter into the vacuum and gently press down, as illustrated.
2. Reinstall the dust cup.

Cleaning the Multi-Brush Bar

1. Turn the lock counterclockwise ↺ until it stops, then remove the roller brush from the brush bar.
2. Use scissors to cut off hairs and fibers stuck on the brush bar head. Wipe dust from the notch and transparent cover with a dry cloth or paper towel. Thoroughly dry before use.
3. When dirty, rinse the roller brush with clean water until clean.
4. Stand the roller brush upright for at least 24 hours until fully dry.

Cleaning the Mini Electric Brush

1. Use a coin to rotate the lock counterclockwise ↺ until a click is heard.
2. After unlocking the roller brush, remove it from the mini electric brush, then rinse and clean the brush head.
3. Stand the roller brush upright in a well-ventilated area for at least 24 hours until fully dry.
4. Once the mini roller brush is dry, reinstall it by following the disassembly steps in reverse.

Battery Pack

The vacuum contains a removable rechargeable lithium-ion battery pack with a limited number of recharge cycles. After extended use, the battery pack may no longer hold a charge, indicating it has reached the end of its life cycle and needs replacement.

1. Press the battery pack release button and slide the battery pack to the right ➡️, as illustrated, to remove it.
2. Install the new battery pack.

Specifications

FAQ

If the vacuum is not working properly, please refer to the table below:

Environmental Information

The lithium-ion pack contains substances that are hazardous to the environment. Before disposing of the vacuum, please remove the battery pack, then discard or recycle it in accordance with local laws and regulations of the country or region it is used in.

WEEE Information

Products bearing the WEEE symbol are waste electrical and electronic equipment (WEEE as per directive 2012/19/EU) and should not be mixed with unsorted household waste. Protect human health and the environment by handing over your waste equipment to a designated collection point for recycling, appointed by the government or local authorities. Correct disposal and recycling help prevent potential negative consequences to the environment and human health. Contact the installer or local authorities for more information about collection points and their terms.

Documents / Resources

• Dreame T10 Cordless Vacuum Cleaner [pdf] User Manual
• T10, Cordless Vacuum Cleaner

References

• Smart Robot Vacuum Cleaners | Dreame Official Site
• PayPal

Related Manuals / Resources

(Note: Content in other languages has been omitted as per instructions to merge into the primary language.)