Redmi Note 13 Pro+ 5G User Manual

Welcome and Setup

Thank you for choosing the Redmi Note 13 Pro+ 5G.

To turn on the device, press and hold the power button. Follow the on-screen instructions to set up your device.

For more information, visit our official website: https://www.mi.com/ru/support/userguide

SIM Card Information

Do not insert non-standard SIM cards into the SIM card slot. They may damage the SIM card slot.

WARNING: Do not disassemble the device.

Device Diagram

The Redmi Note 13 Pro+ 5G features a front view with the screen displaying the time '02:48' and date 'Mon, Aug 16'. On the right side, labels indicate the 'Volume buttons' and 'Power button'. At the bottom, it shows the 'USB Type-C port'. Below that, a SIM tray icon with arrows indicates removal/insertion, labeled 'Nano-SIM'.

Waste Electrical and Electronic Equipment

Special precautions must be taken to ensure the safe disposal of this product. This marking indicates that this product should not be disposed of with other household waste within the EU.

To prevent harm to the environment and human health from uncontrolled waste disposal and to promote the reuse of material resources, dispose of your device responsibly.

For safe recycling, return your used device to collection points or retail stores where it was originally purchased.

Battery Safety

ATTENTION! USING THE WRONG TYPE OF BATTERY MAY RESULT IN AN EXPLOSION.

DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To avoid hearing damage, it is not recommended to listen to sound at high volume for extended periods.

Additional safety and precaution information is available at: www.mi.com/en/certification

Important Safety Information

Read all safety information before using the device.

Using unapproved cables, power adapters, or batteries may cause explosion, electric shock, or device damage.
Operating temperature: 0°C to 40°C, relative humidity up to 95%.
Do not attempt to replace the built-in battery yourself to avoid damaging the battery or device.
Charge the device only with the included or manufacturer-approved cable and power adapter. Use only manufacturer-approved accessories compatible with the device.
After charging is complete, disconnect the adapter from the device and unplug it from the outlet. Do not charge the device for more than 12 hours.
Batteries should be recycled or disposed of separately from household waste. Improper handling of batteries may lead to fire or explosion. Disposal or recycling of the device, its battery, and accessories must be carried out in accordance with local laws.
Do not disassemble, crush, puncture, or incinerate batteries. If you find the battery is deformed or damaged, stop using it immediately.
Do not create a short circuit with the battery, as this may cause overheating, burns, or other injuries.
Do not leave the battery in environments with high ambient temperatures. Overheating can lead to explosion.
Do not disassemble, crush, or puncture the battery, as this may cause electrolyte leakage, overheating, or explosion.
Do not incinerate the battery, as this may cause fire or explosion.
Users are prohibited from removing or replacing the battery. Battery removal or repair must be performed only by an authorized service center.
Do not wet the device.
Do not attempt to repair the device yourself. If any component is not functioning properly, contact Xiaomi customer support or an authorized service center.
Before contacting a service center, please unlink your Mi account from the device. This can be done in the device settings or on the website i.mi.com. This is required by current regulations for secure access to your personal information.
Connect other devices according to their operating instructions. Do not connect incompatible devices to this phone.
When using AC adapters, the socket-outlet should be located near the equipment and be easily accessible.

Precautions

Observe applicable laws and regulations that restrict mobile phone use in certain situations and locations.

Do not use the phone at gas stations, in potentially explosive atmospheres (e.g., fuel areas, cargo holds on ships, fuel or chemical storage, areas with chemicals or fine sand, dust, or metal powders).
Observe all posted signs prohibiting the use of wireless devices (phones or other radio equipment).
Turn off your smartphone or wireless device in blasting areas, or in areas where signs prohibit the use of radios or electronic devices, to avoid possible interference.
Do not use the smartphone in hospital operating rooms, emergency rooms, or intensive care units. Follow all hospital rules and regulations. If you use a personal medical device, consult your doctor and the device manufacturer to determine if the phone may interfere with its operation.
To avoid possible interference with a pacemaker, always maintain a minimum distance of 15 cm between the pacemaker and the mobile phone. Hold the phone to the ear opposite the side where the pacemaker is located, and do not carry it in a breast pocket. To avoid interference with other medical equipment, do not use the phone near hearing aids, cochlear implants, and other similar devices.
Comply with aircraft safety regulations and turn off the phone if necessary.
When driving, use the phone in accordance with applicable traffic laws and regulations.
To avoid lightning strikes, do not use the phone outdoors during a thunderstorm.
Do not use the phone for calls while it is charging.
Do not use the phone in high-humidity environments, such as bathrooms. This may cause electric shock, injury, fire, or damage to the charger.

Safety Statement

Update the phone's operating system using the built-in software update function or at authorized service centers. Using other methods to update the software may damage the device or lead to data loss, security issues, and other risks.

Regulatory Information (EU)

EU Declaration of Conformity

Hereby, Xiaomi Communications Co., Ltd. declares that this digital mobile phone 23090RA98G, with support for GSM/GPRS/EDGE/UMTS/LTE/5G NR and Bluetooth and Wi-Fi functions, complies with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED).

The full text of the EU Declaration of Conformity is available at the following internet address: www.mi.com/en/certification

Radio Frequency Emission Information (SAR) - EU

This device meets government requirements for exposure to radio waves. The device is designed and manufactured not to exceed the emission limits for radio frequency (RF) energy. The specific absorption rate (SAR) is used as the standard for exposure to radio waves for wireless devices.

The EU Council Recommendation 1999/519/EC, ICNIRP guidelines, and Directive 2014/53/EU (RED) define the SAR limit for the public/uncontrolled exposure as 2.0 W/kg averaged over 10 grams of tissue.

During testing, this device transmitted at its highest certified power level in all tested frequency bands. It was tested in positions simulating RF exposure when worn close to the head and 5 mm from the body.

SAR values are based on measurements taken at 5 mm from the body. It is recommended to use the device at least 5 mm from the body to ensure acceptable RF exposure levels. To ensure compliance with RF exposure regulations when wearing the device close to the body, use belt clips or cases without metal components that maintain a minimum distance of 5 mm from the device to the body. Compliance for RF exposure when wearing body-worn accessories containing metal has not been tested or certified and is therefore not recommended.

SAR Certification Information (SAR Limit Values)

SAR limit for 10g: 2.0 W/kg.

Head SAR: 0.983 W/kg, Body SAR: 0.997 W/kg (at 5 mm).

Legal Information

This device may be used in all EU member states. Observe national and local regulations when using the device.

Ensure that power adapters used comply with applicable national regulations and international/regional safety standards.

Wi-Fi connectivity capabilities (including Wi-Fi frequency bands, Wi-Fi standards, and other features approved in the technical specifications of IEEE 802.11) may vary depending on regional availability and local network support. This functionality can be added via OTA updates if applicable.

Frequency Bands and Power (EU)

This smartphone operates in the following frequency bands within the EU and at maximum radio frequency power:

GSM 900: 35.5 dBm
GSM 1800: 32.5 dBm
WCDMA 1/8: 25.7 dBm
LTE 1/3/7/8/20/28/38/40/41: 25.7 dBm
5G NR n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm
5G NR n77/n78: 29 dBm
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250 MHz is 23 dBm, 5250 to 5350 MHz is 20 dBm, 5470 to 5725 MHz is 20 dBm, 5725 to 5850 MHz is 14 dBm
NFC: 13.56 MHz < 42 dBuA/m at 10 m

5G network performance depends on the country, operator, and user's operating environment.

Federal Communications Commission (FCC) Norms (USA)

This smartphone complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

This smartphone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These requirements provide reasonable protection against harmful interference in residential installations.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Emission Information (SAR) - FCC

This device meets government requirements for exposure to radio frequency (RF) energy. The device is designed and manufactured not to exceed the emission limits for RF energy exposure. The standard for RF exposure is the Specific Absorption Rate (SAR).

The FCC has established a SAR limit of 1.6 W/kg. This device has been tested for use close to the body. It complies with FCC RF exposure requirements when used with accessories that do not contain metal and are positioned at least 1.5 cm from the body. Compliance for RF exposure when wearing body-worn accessories containing metal has not been tested or certified and is therefore not recommended. Any accessory used with this phone close to the body must maintain a distance of at least 1.5 cm from the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Shielded cables must be used with this equipment to ensure compliance with Class B FCC limits.

Electronic Label

This device has an electronic certification label. To view it, go to Settings > About phone > Certification, or search for 'Certification' in Settings.

Model: 23090RA98G

The '2309' marking indicates that the product will be released to the market after September 2023.

Disclaimer

This user manual is published by Xiaomi or its local affiliated company. Xiaomi may make changes or corrections to this user manual due to typographical errors, inaccuracies in current information, or improvements to software and hardware at any time without notice. Such changes will be added to new versions of this user manual (see https://www.mi.com/ru/support/userguide for details). All illustrations are for demonstration purposes only and may not accurately represent the actual device.

Importer and Product Information

Authorized person (importer - if applicable) according to Customs Union technical regulations: Xiaomi LLC, 117638, Moscow, Odesskaya St., Bldg. 2, Floor/Premises/Room 11/II/11 (OGRN 1187746785819, INN 7726439295).

Purpose: This subscriber terminal is terminal equipment for connecting to operator networks of 2G, 3G, 4G standards for voice and data transmission, with support for various connection profiles (Wi-Fi, Bluetooth, etc.).

Power: From AC adapter with output parameters: rated voltage: 20V 6A, from battery: 5000 mAh (typical), 4880 mAh (minimum).

Country of origin: China.

Usage Rules

Installation and usage rules: Installation is performed according to the quick user guide.

Storage rules: Store in closed rooms, in factory packaging, at ambient temperatures from -20°C to +45°C, and humidity up to 70%. Shelf life 3 years. Stacking up to 10 units is allowed.

Transportation rules: Transportation is allowed only in factory packaging, by any means of transport, without distance limitation.

Sales rules: No restrictions.

Disposal rules: At the end of the equipment's service life, contact an official dealer for disposal.

Connection, start-up, adjustment, and commissioning rules: Performed according to the quick user guide.

Restrictions on use for residential, commercial, and industrial zones: The equipment is intended for use in residential, commercial, and industrial zones without exposure to hazardous and harmful production factors. The equipment is designed for continuous 24/7 operation without constant supervision.

Information on malfunctions: If a malfunction is detected: 1) turn off the equipment 2) disconnect from the power supply 3) contact a service center or authorized dealer for consultation or repair.

Manufacturing date is indicated on the box in YY/MM format (YY-year, MM-month). Country of origin – China.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer's postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, 100085, China.

Trademark: Redmi Model: 23090RA98G

	Xiaomi Redmi Note 14 Pro 5G User Guide and Safety Information Official user guide and safety information for the Xiaomi Redmi Note 14 Pro 5G smartphone, covering regulatory compliance, operating instructions, and safety precautions.
	Redmi Note 13 5G Safety Information and Regulatory Compliance Comprehensive safety information, EU regulations, FCC compliance, SAR information, and usage precautions for the Redmi Note 13 5G smartphone.
	Redmi Note 13 Pro 5G Safety Information This document provides safety information for the Redmi Note 13 Pro 5G, including EU and FCC regulations, SAR information, frequency bands, and precautions for use.
	Xiaomi Redmi Note 13 Pro+ 5G User Manual and Safety Information Comprehensive user guide and safety instructions for the Xiaomi Redmi Note 13 Pro+ 5G smartphone, covering setup, features, and important safety precautions.
	Redmi Note 13 Pro 5G Quick Start Guide This guide provides instructions for setting up and using the Redmi Note 13 Pro 5G, including safety information, regulatory compliance, and warranty details.
	Redmi Note 13 Pro+ 5G Quick Start Guide This document provides a quick start guide for the Redmi Note 13 Pro+ 5G, covering setup, safety information, and regulatory compliance.
	Redmi Note 14 5G User Manual and Safety Information Comprehensive user guide and safety instructions for the Xiaomi Redmi Note 14 5G, covering setup, operation, warranty, and regulatory compliance.
	Redmi Note 12 Pro+ 5G Quick Start Guide \| Xiaomi Official quick start guide for the Redmi Note 12 Pro+ 5G smartphone by Xiaomi. Learn about initial setup, MIUI features, important safety precautions, regulatory compliance, and technical specifications.