Preface
Thank you for your purchase. Before starting to use the product, please read and keep this instruction manual carefully for reference. The look and structure of our products will continue to improve. Content changes due to product upgrading will be made without prior notice.
Quick View
The Green Lion DUO SHAVE Trimmer and Shaver features the following components:
- 1. Tool Head Assembly: The primary cutting mechanism at the top of the device.
- 2. Knife Head Cover: A protective cover for the blade assembly.
- 3. Power Button: The main button used to turn the shaver on/off and switch modes.
- 4. Indicator Light: A light that displays charging status or operational modes.
- 5. Fuselage: The main body of the electric shaver.
- 6. Type-C Charging Port: The port for connecting the charging cable.
- 7. Clean the Brush: An included brush for cleaning the shaver.
- 8. Type_C Charging Cable: The cable supplied for charging the device.
Safety Instructions
Warning
- Wash the handheld part under water only after disconnecting it from the power cord.
- Do not disassemble the body for battery replacement.
- When operating the charging plug, do not pull the charging cord.
- Do not charge the product for a long time without supervision. Charging time should not exceed 24 hours.
- The product contains a built-in rechargeable battery, which must not be thrown into fire, charged, used, or placed in high temperatures.
- Do not place or insert foreign objects into the product.
- Do not attempt to modify or repair the product yourself.
Caution
- If the charging cord is damaged or does not work normally, please stop using it.
- If the power cord is damaged, it must be replaced with a dedicated cord or a part purchased from the manufacturer's service department.
- Keep the product out of reach of children.
- Ensure the charging port is dry when charging.
- Please use a 5V charger for charging.
- If the product is not used for a while, please ensure it is fully charged at least once every six months.
Reminder
- The product is for single-person use only.
- When traveling with the razor, ensure the protective cover and the travel lock are in place to protect the razor.
- Charge, use, and store the razor at temperatures between 5°C and 35°C.
- To avoid damage to the charging cord, please do not wrap it around the product.
- The product is suitable only for removing facial hair. It is not recommended for use on the head or other body parts.
- The product has passed IPX7 waterproof test and can be washed with water or under a faucet. Nevertheless, do not soak in water for prolonged periods.
- During cleaning, it is normal for water to drip from crevices. Electronic components are enclosed in separate waterproof parts.
- Persons with limited civil capacity, lack of experience, or knowledge (including children) must use, clean, and maintain the product under the supervision and guidance of a guardian.
Charging Instructions
- The LED display shows the percentage of remaining power of the electric razor.
- Connect one end of the USB interface of the charging cord to the charger, and then connect the Type-C interface of the charging cord into the charging port for charging. During charging, the power indicator blinks and the power digits increase from 00 to 99. When fully charged, the "99" digit is lit.
- When the battery is low and the product cannot be powered on, it takes about 100 minutes to fully charge. It can be used for about 60 minutes after a full charge. Charge the product when the battery is low. If not in use for a while, charge it at least once every six months.
- When the battery is below 20%, the LED display (current battery) starts to blink as a reminder to charge until the electric razor is powered off.
- The plug and go mode is available after connecting the charger when the battery is low. (Charging is prohibited when the charging port is wet.)
Specifications
| Specification | Details |
|---|---|
| Model No. | GL-TM55 |
| Material | ABS |
| Blade | Stainless Steel |
| Motor | DC 180 |
| Power | 5W |
| Speed | 2 Levels |
| RPM Range | 11500 RPM |
| Battery | 600mAh |
| Waterproof | IPX7 |
| Charging Port | Type-C |
| Charging Time | 100 min |
| Working Time | 60 min |
| Product Weight | 150 g |
| Product Dimensions | 79.7*60*31.2 mm |
Instructions
a. Blade Heads Disassemble & Assemble Steps
To remove and wash the blades, it is recommended that a professional operates this process. Ensure all blades and blade meshes do not switch positions. Install them back into their original positions. Failing to do so may cause increased noise, weakened shaving effect, and uneven operation.
- Step 1: Pull Up the blade head assembly.
- Step 2: Detach the Razor Body from the blade assembly.
- Step 3: Assemble the Blade Heads Back to The Body.
b. Operational Method
- Clean the facial skin before shaving. Mild skin irritation after the first few shaves is normal. It is recommended to use the razor regularly over a 3-week period (approximately 3 times a week) to allow the skin to adapt.
- During shaving, press gently and move slowly on the face in circles. The shaver can be used dry or with water (dry shaving is preferred).
- Press the power button to switch on the razor. The LED display and circular indicator light up concurrently. After a 1-second self-test, the LED display shows the remaining power percentage. Press the power button again to switch off the razor; the LED display turns off.
- Long press the power button for 1 second to switch modes when the razor is powered on. A lit circular indicator signifies acceleration mode, while an off indicator signifies standard mode. The shaver defaults to the mode used during the previous session.
- After shaving, press the power button to turn off the electric razor. (Improper use may damage the blade meshes and blade heads. Confirm blade meshes and heads are intact before use. If damaged, stop using.)
c. Travel Lock
- The razor is equipped with a travel lock feature to prevent accidental switching on in luggage.
- Engage the travel lock: When the electric razor is off, long press the power button for 3 seconds. The motor will not rotate, and the travel lock is engaged. The LED display shows all digits and flashes.
- Disengage the travel lock: In the locked state, long press the power button for 3 seconds. The LED display shows all digits and flashes. After disengaging the lock, the razor powers off directly.
d. Cleaning and Maintenance
To maintain optimal performance, clean the razor after each shave. A cleaning indicator signifies excessive hair residue accumulation, impeding normal operation.
- When cleaning, ensure the product is not being charged and is powered off.
- Gently remove hair residue from the storage chamber using the cleaning brush.
- After brushing off hair residue, rinse the body, blade heads, and hair residue storage chamber with water (warm water is recommended). Do not use towels or paper towels to wipe the blade heads.
Note: The razor can be washed under a faucet. Ensure the charging port is dry when charging.
After rinsing, dry or wipe with a cloth, keep the blade heads dry, and reassemble them.
A man is shown shaving his face with the Green Lion DUO SHAVE Trimmer and Shaver in front of a mirror.
Troubleshooting
| Malfunction | Cause of the Issue | Solution |
|---|---|---|
| Non-ideal shaving | Blade head is damaged or worn | Replace with a dedicated blade head. |
| Hair residue clog | Thoroughly clean the blade heads. | |
| Does not power on when pressing the power button | Low or no power | Connect the charging cord for charging. |
| Power button fails | Return to after-sales service for repair. | |
| The LED display is abnormal/off | The travel lock is engaged | Long press the power button for 3 seconds to disengage the lock. |
| Low battery and needs to be charged | Please charge the razor. | |
| Damaged circuit board | Return to after-sales service for repair. | |
| Skin irritation after shaving | Blade head is damaged or worn | Replace with a dedicated blade head. |
| It takes a long amount of time for the skin to adapt to the razor | After 2 to 3 weeks of usage, the skin will adapt and the irritation will disappear. | |
| Unable to charge | Damaged razor | Return to after-sales service for repair. |
| Charging environment temperature is too low or too high | Change to a proper environment between 5°C and 35°C. | |
| Shave for less than 60 minutes after a full charge | The razor head has not been changed | Replace with a new razor head with a larger load capacity. |
| The battery malfunctions | Return to after-sales service for repair. | |
| The razor automatically powers off and the display flashes 3 times | Blockage by foreign objects | Thoroughly clean the razor head. |
| The razor is damaged | Return to after-sales service for repair. |
Warnings
- Please do not discard the battery into fire, as it may cause explosion or release of toxic and harmful substances.
- Please do not short-circuit the battery, as it may set it on fire.
- Do not disassemble the product unless it is to be discarded. Premature disassembly will damage the product. During operation, basic safety precautions must be observed. Disconnect the product from the power supply before battery removal.
Environmental Protection
When the razor reaches its service life, the battery inside must be removed for recycling and proper disposal according to the laws and regulations of the country or region before discarding the razor. If the battery cannot be removed, hand over the product to a recycling center designated by the government or a company-designated service department. The service department shall disassemble and recycle the battery.
- Remove the razor head assembly when the electric razor is powered off.
- Use a screwdriver to detach the left and right screws of the hair residue storage chamber and remove it.
- Use a screwdriver to gently pry the left and right sides of the waterproof cover and remove it.
- Press the screwdriver against the charging port. Push out the circuit board assembly and gear stand.
- Use a screwdriver to detach the front and rear screws of the gear stand and pull out the circuit board assembly.
- Cut the positive and negative soldering lugs on the battery and remove it.
Disposal
This product must not be disposed of as unsorted household waste. It is important to separate such waste for proper treatment and recycling, in compliance with local waste management regulations.
Warranty
Products purchased directly from the Green Lion website or shop come with a 24-month warranty. Products purchased from approved sellers come with a 12-month warranty. To extend your warranty, visit https://www.greenlion.net/warranty, fill out the form with your information, and upload a picture of the product. Your warranty extension will be confirmed via email after review and acceptance.
For more information, please check: https://www.greenlion.net/warranty
Contact Us
For any questions, please contact Green Lion:
- Website: https://www.greenlion.net/
- Sales: sales@greenlion.net
- Service Support: Support@greenlion.net
- Telegram: @greenlion_global
- Instagram: @greenlion_global
Green Lion | The Smart Choice
