Green Lion GL-TM54 Rotary Shaver: User Manual & Specifications
Product Overview
This document provides comprehensive information about the Green Lion GL-TM54 5-in-1 Grooming Kit, a rotary electric shaver designed for facial hair removal.
Brand: Green Lion
Model Number: GL-TM54
SKU: GNROTM54SBK
The product features a rotary shaving system, a Type-C charging port, and a 5-in-1 grooming capability.
[Image description: A black Green Lion electric shaver head with five circular, rotating blades.]
Product Components
The shaver kit includes the following parts:
- 1. Tool head assembly
- 2. Blade head cover
- 3. Power button
- 4. Indicator light
- 5. Shaver body
- 6. Type-C charging port
- 7. Cleaning brush
- 8. Type-C charging cable
Safety Instructions
WARNING:
- Wash the handheld part under water only after disconnecting from the power cord.
- Do not disassemble the shaver body to replace the battery.
- When using the charger, do not pull the charging cable.
- Do not charge the product for extended periods without supervision.
- Charging time should not exceed 24 hours.
- The product contains a built-in rechargeable battery and should not be disposed of improperly.
- Do not dispose of the battery in fire, as it may cause explosion or release toxic substances.
- Do not short-circuit the battery, as it may cause ignition.
- Do not disassemble the product unless you intend to dispose of it, as premature disassembly will damage the product.
- If the charging cable is damaged or not working properly, stop using it.
- If the power cord is damaged, it must be replaced with a dedicated cord or a spare part from the manufacturer's service department.
- Keep the product away from children.
- Ensure the charging port is dry before charging.
- Use only a 5-volt charger.
- If the product is not used for a period, charge it fully at least once every six months.
REMINDER:
- The product is intended for use by one person only.
- When traveling with the shaver, ensure the protective cover is in place and the travel lock is engaged to protect it.
- Charge, use, and store the shaver at temperatures ranging from 5°C to 35°C.
- To avoid damage to the charging cable, do not wrap it around the product.
- The product is suitable for facial hair removal only; it is not recommended for use on the head or other body parts.
- The shaver has passed IPX7 water resistance testing and can be washed with water or under a tap. Do not soak it in water for extended periods.
- It is normal for water to drip from the device during cleaning; all electronic components are protected within waterproof parts.
- Individuals lacking full legal capacity or sufficient experience and knowledge (including children) should use and clean the product under the supervision and guidance of a guardian.
Charging Instructions
The LED screen displays the remaining battery level. Connect one end of the USB cable to the charger and the other end to the Type-C port to charge the device.
During charging, the power indicator flashes, and the percentage increases from 0 to 99. When charging is complete, the "99" indicator lights up.
A full charge takes approximately 60 minutes and provides about 12 minutes of use. Charge the product when the battery is low. If unused for a period, charge it at least once every six months.
When the battery drops below 20%, the LED screen flashes the current charge level as a charging alert until the shaver turns off. The "Direct Power" mode is available when the charger is connected and the battery is low. Do not charge when the charging port is wet.
Specifications
Specification | Details |
---|---|
Model Number | GL-TM54 |
Material | ABS |
Blade | Stainless steel blade |
Motor | DC 2.6V |
Battery | 1400 mAh battery |
Power | 5W |
Speed | Two levels |
Rotation Speed (RPM) | 3300 RPM |
Charging Port | Type-C |
Charging Time | 2.5 hours |
Operating Time | 2 hours |
Water Resistance | IPX7 |
Product Weight | 218 grams |
Product Dimensions | 112 x 104 x 73 mm |
Operating Instructions
Clean your face before shaving. Mild skin irritation may occur after the first few shaves, which is normal. Regular use for about 3 weeks (3 times a week) is recommended to allow skin adaptation.
During shaving, press gently and move the shaver slowly in circular motions. It can be used dry or wet (dry shaving is preferred).
Press the power button to turn on the shaver. The LED screen and circular indicator will light up. After a one-second self-test, the LED displays the remaining battery level. Press the button again to turn off the shaver.
Press and hold the power button for one second to switch between modes: acceleration mode (indicated by the circular indicator) and standard mode. The shaver defaults to the last used mode.
After shaving, press the power button to turn off the shaver.
Improper use may damage blade nets and heads. Ensure they are intact before use.
Travel Lock Feature
The shaver has a travel lock to prevent accidental activation.
- To activate: With the shaver off, press and hold the power button for 3 seconds. The motor will not rotate, and the travel lock is engaged (LED screen displays numbers and flashes).
- To deactivate: If locked, press and hold the power button for 3 seconds. The LED screen will display numbers and flash. The shaver will turn off immediately after deactivation.
Cleaning and Maintenance
For optimal performance, clean the shaver after each use. The cleaning indicator signifies accumulated hair residue.
- Ensure the shaver is turned off and not connected to the charger before cleaning.
- Gently remove hair residue from the storage compartment using the cleaning brush.
- Rinse the shaver body, blade heads, and hair residue compartment with water (preferably warm). Do not use towels or paper tissues on the blade heads.
- [Note: The shaver can be washed under the tap. Ensure the charging port is dry before charging.]
- After rinsing, dry with a cloth. Ensure blade heads are dry before reattaching them.
[Diagram description: Steps for cleaning the shaver head. First, detach the shaver head. Second, rinse the shaver head and body under running water. Third, dry the shaver head.]
Troubleshooting
Problem | Cause | Solution |
---|---|---|
Imperfect Shaving | Blade head is damaged or worn | Replace with a dedicated blade head. |
Imperfect Shaving | Hair residue clogs the shaver | Clean the blade heads thoroughly. |
Low or no power | Low power or not charging | Connect the charging cable to charge the device. |
Power button does not work | Travel lock is activated | Press and hold the power button for 3 seconds to deactivate the lock. |
LED screen is abnormal or off | Battery is low and needs charging | Please charge the shaver. |
LED screen is abnormal or off | Circuit board is damaged | Contact after-sales service for repair. |
Skin irritation after shaving | Blade head is damaged or worn | Replace with a dedicated blade head. |
Skin irritation after shaving | Shaver not cleaned for 2-3 weeks, long-term use causes more load | Clean the shaver head well. Skin sensitivity will disappear after 2-3 weeks of adaptation. |
Shaver is damaged | Shaver failure | Contact after-sales service for repair. |
Cannot charge | Charging environment temperature is too low or too high | Charge in an environment with temperatures between 5°C and 35°C. |
Shaving time is less than 45 minutes after full charge | Shaver head not cleaned for a long time, causing more load | Clean the shaver head well. |
Shaver stops automatically with the screen flashing 3 times | Battery failure | Contact after-sales service for repair. |
Shaver stops automatically with the screen flashing 3 times | Foreign objects are blocked | Clean the shaver head well. |
Shaver stops automatically with the screen flashing 3 times | Shaver failure | Contact after-sales service for repair. |
Environmental Protection & Disposal
When the shaver reaches the end of its service life, the internal battery must be removed for proper recycling and disposal according to local regulations. If the battery cannot be removed, return the product to an authorized recycling center or service department.
WARNING:
- Do not dispose of the battery in fire.
- Do not short-circuit the battery.
- Do not disassemble the product unless for disposal.
Follow basic safety precautions and disconnect from power before battery removal.
Disassembly Steps (for disposal)
- Remove the blade head assembly.
- Use a screwdriver to remove screws from the hair residue compartment.
- Use a screwdriver to detach the waterproof cover.
- Use a screwdriver to press at the charging port and remove the circuit board and gear holder.
- Use a screwdriver to loosen screws for the gear holder and pull out the circuit board assembly.
- Cut the battery's positive and negative solder points and remove the battery.
Warranty Information
Products purchased directly from the Green Lion website or store have a 24-month warranty.
Products purchased from authorized distributors have a 12-month warranty. Warranty extensions can be requested via the website: https://www.greenlion.net/warranty. You will need to fill out a form and upload a product image.
For more information, please visit: https://www.greenlion.net/warranty
Contact Us
For inquiries, please contact Green Lion:
- Website: https://www.greenlion.net/
- Sales: sales@greenlion.net
- Customer Support: Support@greenlion.net
- Telegram: @greenlion_global
- Instagram: @greenlion_global