AVIOT WA-V1 Bluetooth Earbuds
User Manual and Important Safety Instructions
Important Safety Instructions
Please read these instructions carefully before using the product.
Warning:
- Do not use while driving or operating machinery.
- Avoid prolonged exposure to high volumes to prevent hearing damage.
- Keep away from water and moisture.
- Do not disassemble or modify the product.
- Keep out of reach of children.
Caution:
- Use only the provided charging cable and adapter.
- Avoid extreme temperatures.
Product Overview
The AVIOT WA-V1 are wireless Bluetooth earbuds designed for high-quality audio and comfortable wear.
Included Accessories:
- Bluetooth Earbuds (Left and Right)
- Charging Case
- USB Charging Cable
- User Manual
- Eartips (various sizes)
Getting Started
Battery Charging
Place the earbuds in the charging case and connect the case to a power source using the provided USB cable. The LED indicator on the case will show the charging status.
Charging Indicator:
- Red LED: Charging
- Green LED: Fully Charged
Turning the Power On/Off
To turn ON: Press and hold the power button on each earbud for approximately 3 seconds until the LED indicator flashes blue. The earbuds will automatically enter pairing mode if not previously connected.
To turn OFF: Place the earbuds back into the charging case. They will automatically turn off and begin charging.
Pairing and Connection
Bluetooth Pairing
- Ensure the earbuds are turned on and in pairing mode (LED flashes blue).
- On your smartphone or other Bluetooth device, go to Bluetooth settings.
- Select "AVIOT WA-V1" from the list of available devices.
- Once connected, the LED indicator will turn solid blue.
Wired Connection
The WA-V1 supports wired connection via a 3.5mm audio cable (sold separately) for devices without Bluetooth capabilities.
List of Operation Methods
| Operation | Button | Action | Indicator |
|---|---|---|---|
| Power ON | M (Multi-function button) | Press and hold for 3 seconds | Blue LED flashes |
| Power OFF | M (Multi-function button) | Place in charging case | LED turns off |
| Play/Pause | M | Single press | LED flashes blue |
| Next Track | M | Double press | LED flashes blue |
| Previous Track | M | Triple press | LED flashes blue |
| Volume Up | + Button | Single press | LED flashes blue |
| Volume Down | - Button | Single press | LED flashes blue |
| Answer/End Call | M | Single press | LED flashes blue |
| Reject Call | M | Press and hold for 2 seconds | LED flashes blue |
| Activate Voice Assistant | M | Press and hold for 1 second | LED flashes blue |
Resetting the Earbuds
If you experience connection issues, you can reset the earbuds. Press and hold the power button on both earbuds for approximately 10 seconds until the LED indicator flashes red and blue, then release. Place the earbuds back in the charging case to complete the reset.
Warranty
AVIOT provides a limited warranty for the WA-V1 Bluetooth Earbuds. Please refer to the warranty card included in the package for details on coverage and duration. Registration may be required.
Warranty Coverage:
- Defects in materials and workmanship.
- Does not cover damage caused by misuse, accidents, or unauthorized modifications.
FAQ
Q: How long does the battery last?
A: The earbuds provide up to 6 hours of playback on a single charge, with the charging case providing an additional 3 charges for a total of up to 24 hours.
Q: Can I use only one earbud?
A: Yes, you can use either the left or right earbud independently.
Q: How do I update the firmware?
A: Firmware updates are typically managed through the AVIOT companion app, available on iOS and Android.
About Trademarks
AVIOT and the AVIOT logo are trademarks of Preseed Japan Corporation. Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.
Contact Information
For inquiries and support, please visit the AVIOT website or contact customer service through the details provided on our website.
