SMÅSNÖRE LED Decorative Light
Important Safety Instructions
This product is designed for indoor use only.
When selecting fittings (screws and plugs), ensure they are suitable for the material of the surface where the product will be mounted.
This product is not intended for use by children.
IMPORTANT SAFETY INSTRUCTIONS
Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used.
CAUTION!
The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.
WARNING
Deviation from the assembly instructions may result in a risk of fire or electric shock.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
This decorative item is not intended for use by people (including children) whose physical, sensory or mental capabilities are different or reduced, or who lack experience or knowledge, unless they are otherwise supervised.
Children must be supervised to ensure that items are not used as toys.
CAUTION and mind the following to reduce the risk of fire and electric shock:
- Disconnect the decorative item from its power source before performing any maintenance or cleaning activity.
- Do not place or hang near gas installations, electric heaters, fireplaces, candles, or other similar heating sources.
- Disconnect the item when leaving the house, going to bed, or if left unattended.
- Do not cover the decorative item with fabric, paper, or any material that is not part of the product when it is being used.
- Do not use the decorative item outdoors.
SAVE THESE INSTRUCTIONS
Assembly Instructions
The SMÅSNÖRE light consists of a flexible arm with integrated LED lighting and two base units. The power is supplied via an adapter.
Step 1: Cable Connection
Connect the cable from the light arm to the power adapter cable. The connectors are designed to mate securely.
[Diagram: Shows the flexible light arm with a connector at one end and a separate cable with a matching connector and a circular component. Arrows indicate connecting the two cables.]
Step 2: Attaching the Light Arm to Bases
Insert the connector at the end of the light arm into the corresponding socket on each base unit. Push firmly until you hear a "click" sound, indicating it is securely attached.
[Diagram: Shows the light arm being inserted into two base units. Close-up views illustrate the connection process, with an arrow pointing to the insertion point and a "Click!" label. An inset shows the underside of a base unit with screw holes.]
Step 3: Connecting to Power
Plug the power adapter into a standard wall socket.
[Diagram: Shows the power adapter being plugged into a wall outlet.]
Step 4: Cable Management
Route the power cable neatly. The product may include clips or channels for cable management. Secure the cable as shown in the diagrams.
[Diagram: Shows the assembled lamp with the power cable routed. Insets show a finger pointing to screw holes on the base for securing the cable, and a finger holding a coiled cable, suggesting how to manage excess length.]
Step 5: Mounting Considerations
When mounting the product, ensure you use screws and plugs appropriate for the wall material. Do not use incorrect screw types or sizes, as indicated by the "no" symbol in the diagrams.
[Diagram: Illustrates selecting appropriate screws for mounting. One diagram shows a screw being inserted, while another shows a screw with a prohibition symbol and a measurement, indicating an incorrect type or size.]
Step 6: Final Base Attachment
Secure the light arm to the base units using the provided screws, as shown in the detailed diagrams.
[Diagram: Close-up view showing screws being inserted to fix the light arm assembly to the base.]
Step 7: Operating the Light
The light features a button control for adjusting brightness. Press the button to cycle through different brightness levels or turn the light on/off.
[Diagram: Shows a finger pressing a button on the base. Icons depict a light bulb turning on, dimming (with dashed lines), and turning off.]
Step 8: Brightness Adjustment
The light offers adjustable brightness levels, indicated from x1 to x10. Select your preferred brightness.
[Diagram: Shows the lamp illuminated. A circular graphic with numbered segments (x1 to x10) suggests multiple brightness settings.]
Key Dimensions: The maximum distance between the two bases is 52 cm (20 15/32"). Ensure a minimum distance of 130 mm (5 8/64") for cable management or placement as indicated.
[Diagram: Shows the assembled lamp with a measurement line indicating the maximum span between the bases (52 cm). Another diagram shows curved lines with a minimum distance requirement (130 mm).]
FCC Compliance Information
This product is compliant with Part 15 of the FCC Rules. It is designed to minimize harmful interference in residential installations. If interference occurs, users are advised to try specific troubleshooting steps such as adjusting antenna placement or increasing separation from the receiver.
