Anker SOLIX C300 Portable Power Station

What's in the Box

• Anker SOLIX C300 Portable Power Station
• AC Charging Cable
• Important Safety Instructions

Overview

The Anker SOLIX C300 Portable Power Station is a versatile power source with multiple ports for charging various devices.

Key Components:

• 1 Handle: For carrying the power station.
• 2 Strap Attachment: For attaching adjustable straps (sold separately).
• 3 140W USB-C Input/Output Port: A bidirectional port supporting high-speed charging and data transfer.
• 4 Car Socket: For charging devices via a car charger.
• 5 15W USB-C Output Port: Standard USB-C output port.
• 6 12W USB-A Output Port: Standard USB-A output port.
• 7 Car Socket On/Off Button: Button to control the car socket.
• 8 Solar Input and Car Input: Ports for solar and car charging. The sliding cover prevents simultaneous use of these ports and the 140W USB-C port.
• 9 140W USB-C Output Port: Another high-speed USB-C output port.
• 10 AC Input Port: Port for AC charging.
• 11 AC Output Ports: Multiple AC outlets for powering devices.
• 12 Ambient Light On/Off Button: Button to control the ambient light.
• 13 Ambient Light: Built-in light for illumination.
• 14 Main Power Button: Turns the power station on and off.
• 15 LCD Screen: Displays battery status, input/output power, and other information.
• 16 Reset: Reset button for troubleshooting.
• 17 IoT Button: For connecting to the Anker app via Bluetooth and Wi-Fi.
• 18 AC Output On/Off Button: Button to control the AC outlets.

Recharge Your Power Station

AC Recharging (330W Max)

Connect the power station to a wall outlet using the AC charging cable.

Solar Panel Recharging (100W Max)

Connect up to one Anker 100W/60W Solar Panel using a solar charging cable. The solar panel voltage should be between 11V-28V to avoid damaging the power station.

USB-C Recharging (140W Max)

Recharge the power station using a USB-C cable and a compatible wall adapter. USB-C recharging and XT-60 recharging cannot be used simultaneously. Use a 140W USB-C cable and adapter for optimal charging.

DC Recharging

Recharge the power station by connecting to a DC output port with the DC charging cable. The "Remaining Battery" indicator will flicker when the battery is at 1%.

Powering Your Device

Power On/Off

Press and hold the main power button for 3 seconds to turn the power station on or off. The LCD screen will display the battery status when ready to charge devices. The screen automatically turns off after 15 seconds of inactivity, but this can be adjusted in the Anker app. The power station will automatically shut down after 2 hours of inactivity if output buttons are off, which can also be configured in the app.

AC Charging

Press the AC outlet button and connect your device to the AC output ports. The outlets intelligently detect inserted plugs to prevent power waste.

USB Charging

Connect your devices to the USB ports. Note that USB-C2 and USB-C3 ports are classified as PS3. Ensure connected equipment complies with IEC/EN IEC/BS EN IEC 62368-1 standards. Use a USB-C 5A cable for maximum power (140W).

Car Socket Charging

Turn on the car socket and connect your devices to start charging.

Uninterruptible Power Supply (UPS)

To use the UPS feature, connect the power station to a wall outlet with the AC charging cable, press the AC outlet button, and connect your devices to the AC output ports. UPS supports a 10ms switchover time.

SurgePad™

The Anker SOLIX C300 Portable Power Station supports SurgePad™ for up to 600W AC output. SurgePad™ automatically activates when the total output exceeds the rated output, providing power to high-wattage devices. It does not function in bypass mode and works best with devices that generate heat, not precision instruments with strict voltage requirements.

Light

Ambient Light

Press the ambient light button once to turn it on. Press it up to two more times to cycle through brightness levels.

SOS Mode

Hold the ambient light button for 2 seconds to activate SOS mode.

LCD Screen Guide

The LCD screen provides information about the power station's status:

• 1 IoT Button: Controls Bluetooth and Wi-Fi for app connectivity.
• 2 AC Charge and Voltage Frequency: Displays AC input status and frequency (50Hz/60Hz).
• 3 Low-Temperature Alert: Indicates when the temperature is too low for operation. Stop using until the icon disappears.
• 4 Overload Warning: Appears when a port is overloaded. The port will shut off to prevent damage. Remove the overloaded device.
• 5 High-Temperature Alert: Indicates when the temperature is too high. Stop using and let it cool down.
• 6 USB-C Input/Output Port: Indicates a USB-C port.
• 7 USB-A Output Port: Indicates a USB-A port.
• 8 Car Charging: Indicates car charging status.
• 9 Remaining Battery for Power Station: Displays the remaining battery percentage.
• 10 Current Output Power: Shows the power being outputted.
• 11 Current Input Power: Shows the power being inputted.
• 12 Estimated Time to Fully Recharge: Displays the estimated time to reach a full charge.
• 13 Estimated Time for Battery to Deplete: Displays the estimated time until the battery is depleted.

The Anker App for Smart Control

Remotely control your power station using the Anker app. Download it from the App Store or Google Play. Connect the device to a network before first use. Firmware updates will be available through the app.

FAQ

• Q1: What is the max power output of the AC output ports? The AC output ports can deliver a maximum of 300W rated power and support up to 600W with SurgePad™.
• Q2: Can Anker SOLIX C300 Portable Power Station power a CPAP machine? Yes.
• Q3: What should I do when using a solar charger to charge Anker SOLIX C300 Portable Power Station? Use an 11-28V solar charger with an XT-60 connector. Anker 100W/60W Solar Panels are recommended for best compatibility.
• Q4: Can the USB-C ports be used to charge Anker SOLIX C300 Portable Power Station (input only) or are they output only? USB-C1 and USB-C3 are output only. USB-C2 supports both output and input.
• Q5: How do I reset Anker SOLIX C300 Portable Power Station? Insert a paper clip or pin into the reset hole for 1 second for a factory reset. Contact support@anker.com if the issue persists.
• Q6: Why is the power station not working after it hasn't been used for a long time? Storing the power station at low capacity for extended periods can lead to self-discharge, reduced battery lifespan, and poor conductivity.
• Q7: How should I store and maintain the power station? Turn off the main power button, store in a dry and cool environment, and check battery capacity weekly. Charge to 100% if below 30% or every 3 months.
• Q8: Does the power station have to be used upright? Yes, the product must be used and stored upright.

Specifications