Kogan Multisport GPS Watch

Safety & Warnings

• Read all instructions before using the appliance and retain for reference.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• This appliance is designed for consumer use: follow directions and use only as described.
• This appliance contains no user-serviceable parts. If it suffers any failure or damage, cease usage and contact Kogan Support.

Overview

Watch

The watch features the following components:

• Pressure sensor
• Microphone
• Power button: Press to power on/off, wake/turn off screen, or return to the main menu.
• Turn knob: Used to flip through options and confirm selections.
• Shortcuts: Access sports mode or wake the screen.

The watch display shows time, heart rate (e.g., 62 bpm), and battery status.

Charger

The charger requires alignment with the watch. It features a USB input. The watch can be charged via the included charger or directly via USB (5V 1A).

Interface

• Swipe from right to access main menu: Displays various app icons.
• Slide down to access quick settings: Includes brightness, find phone, Bluetooth, GPS, mute, aeroplane mode, weather, and calendar.
• Slide up to access daily exercise statistics: View single exercise statistics, sleep monitor, heart rate, elevation, air pressure, and GPS page.

Operation

Setup

System requirements: Android 4.4+; iOS 8.0+ (iPhone 5 and above).

1. Install the 'HitFit' app from the Play Store (Android) or App Store (iOS).
2. Locate the watch within the app and connect.
3. Locate the watch within the phone's Bluetooth settings and connect.
4. When prompted, allow notifications and grant permissions.

After connecting, you can sync data by tapping a sync icon [sync-icon]. Long press the dial and slide to select your preferred clock interface.

Menu Options

The watch offers various menu options:

• Profile: Set gender, height, weight, date of birth.
• Messages: View and quick reply to messages (Android only) when connected via Bluetooth.
• Calls: Sync call logs (Android only) and make calls when connected via Bluetooth.
• Heart rate: Measure heart rate.
• Notifications: Set notification permissions in the app (Android).
• Settings:
  • Profile: Set gender, height, weight, date of birth.
  • Bluetooth: Enable/disable.
  • GPS: Enable/disable.
  • Sensor calibration: Calibrate ALT and GPS.
  • Time and date: Set time and date.
  • Units: Set imperial/metric units for distance, height, and weight.
  • Temperature unit: Set Celsius or Fahrenheit.
  • Activate on wrist flick: Enable/disable.
  • Sound: Set ringtone and volume.
  • Display: Set brightness and backlight off time.
  • Info: Display device name and software version.
  • Language: Sync to device language or set custom language.
  • Battery: Show battery level.
  • Factory reset: Restore to factory default.
• Siri: Use Siri functionality through the watch.
• Alarm: Set alarm type (meals, meetings, medication, sleep, exercise, get up), time, schedule, and tone.
• Target: Set targets for steps, distance, calories, and exercise.
• Sleep: Set time for sleep tracking.
• Music: Control volume and playback.
• ALT and barometer: Display altitude and barometer.
• Camera: Control phone camera.
• Calculator.
• Sound recorder: Tap to start recording. Slide from right to left to check recordings.
• Stopwatch: Start/stop stopwatch. Slide from right to left to check.
• Volume: Turn volume up or down.
• Brightness: Turn brightness up or down.
• Calendar: Slide screen to view different months.
• Activate on wrist flick: Enable/disable.
• Weather: Display local weather once synced.
• Movement type: Set activity type (walking, running, biking, hiking, indoor run, outdoor run) and view whole day's activity.

Sharing Data

Once movement data is synced, share it to Strava or other services, or save it to your device. Click the share button [share-icon] in the top right corner. Data shared to Strava must include trajectory information.

iOS Sharing

Tap 'share' to bring up the sharing prompt with Strava. If you are not logged into Strava, you will need to log in or create an account before sharing. Due to limitations with the Strava app, synchronization may sometimes appear to fail but may have succeeded.

Android Sharing

Tap 'share' to bring up the sharing prompt with Strava. Similar to iOS, log in or create an account if not already done. Synchronization issues may occur but might still be successful.

After uploading, you can view corresponding sports data on Strava. Note that there may be differences between the data displayed on Strava and on the Multisport GPS Watch due to data processing.

Strava Integration and Data Display

The watch allows sharing of activity data to platforms like Strava. The process involves initiating a share from the app, which may prompt for Strava login or account creation. Post-upload, Strava displays detailed activity metrics including distance, pace, elevation, and heart rate, often presented in graphical formats.

Examples of data displayed on Strava include:

• Walk Data: Distance (e.g., 0.4 km), time, elevation gain, average speed.
• Running Data: Distance (e.g., 0.33 km), pace (e.g., 12'11"/km), time, heart rate zones, anaerobic limit, cardio pulmonary exercise duration.
• Graphs: Visualizations of elevation, pace, and heart rate over time during an activity.

Unlinking Account

After connecting to Strava, the app will be linked. To change your details or unlink from Strava, navigate to the 'Me' interface, then personal settings (iOS) or device settings (Android) within the app.

Personal settings allow modification of Name, Gender, Height, Weight, Age, and Target (e.g., steps, duration).