Kogan Play 2 Kids Smart Watch

Safety & Warnings

Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference.

• This watch must be charged for at least 3 hours before first use.
• Misuse of batteries can lead to them bursting, causing a fire, or chemical burns.
• Do not disassemble this watch.
• Do not crush or expose the battery to shock or force (for example, dropping or stepping on it).
• Do not short circuit the watch.
• Do not expose the watch to high temperatures or place it near heat sources (fires, stoves, heaters).
• Do not expose the watch to direct sunlight.
• Do not expose the watch to high moisture areas, and do not allow it to touch or submerge in water or any other liquid.
• If the battery within the watch is damaged or leaking, stop use immediately and contact help.Kogan.com for assistance.
• Keep the battery dry and out of the reach from children.
• If the watch is damaged, stop use immediately and contact help.Kogan.com for assistance.
• Charging should only be performed by an adult.
• The battery within cannot be disposed of in normal waste. If disposing, follow local regulations.

Care Instructions for Waterproof and Dustproof Features

The watch is waterproof and dustproof. Follow the below guidelines to maintain the waterproof and dustproof function. Otherwise, your device may be damaged.

• Do not use the watch under high pressure water.
• Do not use the watch when diving, snorkelling or other sports in turbulent water.
• Do not use the watch in sauna rooms. The waterproof function may be impacted.
• Always dry your hands and watch fully before operating.
• If the watch is exposed to water, dry it fully with a soft cloth. If it is exposed to other liquids (such as salt water, pool water, soapy water, oil, perfume, sunscreen, hand sanitizer) or chemicals, wash it with clean water and dry it completely with a soft cloth.
• If the watch is dropped or hit, the waterproof and dustproof function may be impacted.
• Do not disassemble your watch. The waterproof and dustproof function may be damaged.
• Do not use the watch in extremely high or low temperature environments.
• Do not use blowers or heating equipment to dry the watch.

Cleaning and Maintenance

Follow the below points to ensure that the watch operates normally and continues to look good. Failure to do so may cause skin irritations.

• Protect the watch from dust, sweat, ink, oil and chemical products (cosmetics, antibacterial sprays, sanitizers and insecticides etc.). Otherwise, the internal and external parts may be damaged or cause performance degradation.
• If the watch becomes stained, clean it with a lint-free soft cloth.
• When cleaning the watch, do not use soap, detergent, abrasive materials, compressed air, ultrasonic waves or external heat sources. Otherwise, the watch may be damaged. Soap, detergent, hand sanitizer or detergent residue may cause skin irritation.
• After exercising or excessive sweating, clean your wrist and watch strap. Use water to clean the watch. A small amount of alcohol can be used to wipe the watch. Allow the watch to dry thoroughly.
• If the watch is stained, use a wet soft toothbrush to clean it.

Allergies and Skin Irritations

• This watch has been tested for hazardous materials both internally and externally, including testing of all materials that contact skin, skin toxicity testing and wear testing.
• This watch contains nickel. If your skin is very sensitive or you are allergic to the materials used in the watch, take necessary precautions.
• The watch contains a small amount of nickel. The content is lower than the reference value of European REACH regulations. You will not be exposed to the nickel in the watch. However, if you are allergic to nickel, use this watch with caution.
• All materials used in the watch comply with relevant inspection standards such as REACH and RoHS.

Overview

The Kogan Play 2 Kids Smart Watch features a touch screen and a heart rate sensor.

Components:

• Smart Watch
• User Guide
• Charging cable

Operation

Charging

Note: Ensure the smart watch is charged fully before first use.

The watch automatically turns on once it has been charging for at least 30 minutes. To charge, attach the supplied magnetic charging cable to the magnetic charging contacts on the back of the smart watch.

Attach the opposite end of the cable into a USB power adapter (not supplied). Ensure the adapter meets the specified voltage and current (5V/2A).

Notes: Do not use a charger exceeding 5V/2A for charging.

Wearing

Wear it correctly: make sure that the bottom sensor is properly attached to the skin and the strap is one finger away from the wrist.

Operating the Watch

• Powering on: When the watch is off, press and hold the touch screen for 5 seconds to turn it on. The home screen of the watch will be displayed.
• Touch screen operation: From the home screen:
  • Swipe to the left to access the menu, then tap the function icon to enter the corresponding sub-menu.
  • Swipe to the right to the games list menu, then choose one to play ("3 to win" & "Racing Car").
  • Wake up screen: When the watch screen is off, you can touch the screen to wake up the screen. If the gesture control button has been enabled in the app, you can also wake up the screen by turning your wrist.
  • Shutdown: Swipe down, click the setting icon and then select "System $ ightarrow$ Shut down". Tap the green tick ✔️ to confirm and shut down.

Removing the Strap

To remove the straps from the watch, slide the quick release towards the outside of the watch and pull the strap away from the watch.

Pairing with the App

For Android users, open Google Play Store on your smartphone. For iOS users, open App Store on your iPhone. Search for "HitFit Pro" and download the app.

Alternatively, scan the QR code on your device to open the appropriate store for your device and go straight to the app download page.

Bluetooth Connection

1. Ensure Bluetooth and GPS have been enabled on your phone.
2. Install and open the "HitFit Pro" app.
3. In the home screen, press "Personal centre $ ightarrow$ Device" to begin searching for nearby devices.
4. You will see a list of devices. Select the watch and continue with the pairing process.
5. Light up the smart watch screen and bring it close to your phone.
6. In the "Setting" menu on the watch, select "System $ ightarrow$ System version" to confirm the watch's Bluetooth name.
7. If connected successfully, the paired icon will be displayed in the watch's status bar.
8. During the pairing process, you will be prompted to enable GPS and Bluetooth and authorize "HitFit Pro" to get access to the GPS on your mobile phone. Agree to all the permission prompts.
9. For iOS devices to receive notifications or information from the watch, you need to first establish a Bluetooth connection by pairing the watch with your phone's built-in Bluetooth after the initial binding process.

Notes: For iOS devices, it's necessary to agree to pair your phone with the Smart Watch to display iPhone notifications. The successful connection of the Smart Watch will be indicated in the Bluetooth menu of the phone interface.

Synchronizing Data

Ensure you have paired your watch with the "HitFit Pro" app. Open the app, in the home page screen, swipe down on the screen and release or click the Sync icon ✈️ in the upper right to synchronize data. Your data will be shown on the App accordingly.

Tips:

• Do not pair the watch directly from the Bluetooth menu in your mobile phone's settings. Always use the "HitFit Pro" app to pair the watch to your phone.
• While clearing software in the background or closing background applications, avoid disabling the Bluetooth notification service, as doing so can impact the synchronization between the watch and the phone.
• If you want your watch to receive third-party notifications, you will need to turn on the respective notification permissions.

Operation

• Swipe right: Display the games list (3 to win, Racing car).
• Swipe down: Display Battery, Bluetooth, Time, Date, Brightness, Timer, Alarms, Setting.
• Swipe up: Messages, Heart rate monitoring, Daily activity.
• Swipe left: Select from one of the features "Daily activity, Sports, Sports record, Alarms, Heart rate, Sleep, Weather, Settings" tap to enter the corresponding function, swipe right to return to the previous level.

Watch Faces

Press and hold the touchscreen to select one of the six available watch faces.

Screen Lock & Games Lock

You can turn on the Screen lock or Games lock after setting a password to prevent your child from overusing. If the Screen lock is enabled, a password will be required to unlock the watch.

Screen Lock

1. Tap the profile icon ? in the upper left corner of the app's home screen.
2. Select "Screen lock" and tap the toggle to enable it.
3. Tap "Password", select a 6-digit password and tap "OK" to confirm.
4. Synchronize your watch.

Games Lock

1. Tap the profile icon ? in the upper left corner of the app's home screen.
2. Select "Games lock" and tap the toggle to enable it.
3. Tap "Time setting" to select the time restrictions and tap "OK" to confirm.
4. Tap "Password", select a 6-digit password and tap "OK" to confirm.
5. Synchronize your watch.

Basic Functions

• Daily activity: The watch will display the user's total number of steps for the day, walking distance, and calories burned. The data will be cleared at midnight every day.
• Sports: In sports mode, the single-point function icon allows you to enter sports modes such as Walking, Running, Climbing, Riding, Basketball, and Free sports.
• Sports record: If you have done any sports and saved the data, this function will show the information of the sports record.
• Alarms: You can set alarms in the app. The watch will show the alarm details. When the alarm time is up, the watch will vibrate as a reminder.
• Heart rate: The watch measures the user's heart rate using the heart rate sensor. After the test is completed, the watch will display the result. If there is no user input, the screen will automatically turn off. To operate, swipe to the left on the main interface and click the heart rate icon ❤️. Once the interface is entered, the measurement will start. During the measurement, the interface value will be zero. After the measurement is completed, the value will be displayed.
• Sleep: The watch will display the user's sleep time from the previous night. (Sleep measurement time: 21:30 - 12:00 next day). To view, swipe the main interface left and right, and click sleep to switch to the sleep interface to view the previous day's sleep time.
• Weather: After connecting with the "HitFit Pro" app, the watch will show local weather and the updated time.
• Settings:
  • Language: Select different languages.
  • Screen display: Change dial, Brightness, Screen time, Turn wrist wake setting.
  • Do not disturb: Enable/disable "Do not disturb" mode.
  • Vibration: Set vibration intensity.
  • Time: Set the time.
  • Date: Set the date.
  • Time display: Choose the time display mode.
  • System: System version, Shutdown, Reset settings.

Specifications

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.

For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.