Hanwha Vision MGC-F9010LI Network Camera Quick Start Guide

Important Information

Please check the 'Manuals' section on the Hanwha Vision website for detailed information before connecting the supply. You can find manuals at: https://www.hanwha-security.com/en/data-center/download-data/

For product warranty information, please visit: https://www.hanwha-security.com/support/warranty/

It is recommended to use the officially compatible VMS version or the latest Hanwha NVR version when integrating with VMS or Hanwha NVR.

Environmental Considerations

Hanwha Vision is committed to environmental responsibility throughout its manufacturing processes, striving to offer more environmentally friendly products. The 'eco' mark signifies Hanwha Vision's dedication to creating eco-friendly products that comply with the EU RoHS Directive.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

This marking (a crossed-out wheeled bin symbol) on the product, accessories, or literature indicates that the product and its electronic accessories (e.g., charger, headset, USB cable) should not be disposed of with regular household waste at the end of their working life. To prevent potential harm to the environment or human health from uncontrolled waste disposal, please separate these items from other waste types and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact their retailer or local government office for details on where and how to take these items for environmentally safe recycling. Business users should contact their supplier and review the terms and conditions of their purchase contract. This product and its electronic accessories should not be mixed with other commercial waste for disposal.

Correct Disposal of Batteries

This marking on the battery, manual, or packaging (a crossed-out wheeled bin symbol on batteries) indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where chemical symbols Hg, Cd, or Pb are marked, they indicate that the battery contains mercury, cadmium, or lead above the reference levels set by EC Directive 2006/66. Improper disposal of batteries can cause harm to human health or the environment.

To protect natural resources and promote material reuse, please separate batteries from other waste types and recycle them through your local, free battery return system.

Safety Information

Warning Symbol [!]

• Improper installation can lead to damage or malfunction. [Warning symbol indicating potential damage]
• Incorrect handling can result in fire or extreme temperature exposure. [Warning symbol depicting fire and a snowman with asterisks]
• Do not use flammable or explosive substances near the product. [Warning symbol with a canister and a prohibition sign]

Components

The accessories may vary depending on the country of sale.

Main Unit: Network Camera Body

Accessories may include:

• Mounting bracket
• Screws and anchors
• Cables (e.g., network cable, power cable)
• Template for installation
• Hex wrench
• Mounting ring
• Nut
• Gasket

Installation Steps

1. Step 1: Prepare the mounting surface. Attach the mounting bracket if necessary. [Diagram showing hands attaching a ring to the camera base]
2. Step 2: Assemble the camera housing. [Diagram showing camera housing parts being connected]
3. Step 3: Secure the camera base using screws. (6x) [Diagram showing screws being inserted into the camera base with a screwdriver]
4. Step 4: Open the camera cover. [Diagram showing the camera cover being opened]
5. Step 5-1: Install into the conduit. Drill a hole with a diameter of 30mm. [Diagram showing drilling a hole and a pencil marking the spot]
6. Step 5-2: Insert the cable through the conduit and secure it. [Diagram showing cable insertion and securing with a screw]
7. Step 5-3: Attach the mounting ring. [Diagram showing a ring being placed onto the camera base]
8. Step 5-4: Secure the mounting ring with a nut. [Diagram showing a nut being tightened onto a threaded post]
9. Step 6-1: Install into the conduit bracket. [Diagram showing drilling into a bracket]
10. Step 6-2: Secure the camera to the bracket using screws. (4x) [Diagram showing screws attaching the camera to a bracket]
11. Step 7-1: Install on the ceiling or structure. [Diagram showing drilling into a ceiling surface]
12. Step 7-2: Secure the camera to the ceiling/structure using screws. (4x) [Diagram showing screws attaching the camera to a mounting plate]
13. Step 8: Connect the safety cable and the network cable. [Diagram showing cable connections, including a safety cable and network cable]
14. Step 9: Secure the camera housing. [Diagram showing securing the camera housing with clips]
15. Step 10-1: Install the network cable (PoE+). [Diagram showing network cable insertion into the camera]
16. Step 10-2: Connect the network cable to the port. [Diagram showing close-up of network cable connection]
17. Step 11: Install audio/alarm/power cables. [Diagram showing audio, alarm, and power cables being connected]
18. Step 12: Secure the camera cover. [Diagram showing the camera cover being closed and secured]
19. Step 13: Secure the camera with screws. (2x) [Diagram showing screws securing the camera]
20. Step 14: Connect Wi-Fi dongle and OTG adapter (if applicable). [Diagram showing a smartphone connecting wirelessly to the camera via Wi-Fi dongle]
21. Step 15: Use the Wisenet Installation mobile application for setup. [Diagram of a smartphone displaying 'Wisenet Installation']
22. Step 16: Secure the camera housing with screws. (6x) [Diagram showing screws being tightened on the camera housing]
23. Step 17: Assemble the camera housing parts. [Diagram showing camera housing parts being joined]
24. Step 18: Secure the camera housing. [Diagram showing the camera housing being secured]
25. Step 19: Connect external devices such as microphones and speakers. [Diagram showing various cables connected to the camera, including audio and network cables]
26. Step 20: Use Device Manager and the User Manual for further configuration. [Diagram showing a computer screen with 'Device Manager' and 'User Manual']

Configuration and Login

Password Configuration

When accessing the product for the first time, you need to set a username and password.

Administrator Password Change:

• New Password: Enter a new password.
• Confirm New Password: Re-enter the new password.
• Password Requirements:
  • For passwords 8-9 characters long: Must include at least 3 character types (uppercase letters, lowercase letters, numbers, special characters).
  • For passwords 10-64 characters long: Must include at least 2 character types.
  • Usernames cannot be used as passwords. Passwords and usernames cannot be identical.
  • Allowed special characters: ~`!@#$%^&*()_-+={}[]|\;:""<>.,?/
  • Consecutive characters (e.g., 1234, abcd) are not allowed (max 4 consecutive).
  • Repeating the same character 4 or more times consecutively (e.g., !!!!, 1111, aaaa) is not allowed.
  • Spaces are not permitted in passwords.
  • For enhanced security, avoid repeating characters or using sequential keyboard entries.
• If you forget your password, press the [RESET] button to reset the product. Keep your password in a safe place or memorize it.

Login

The login window appears each time you access the camera.

1. Enter "admin" in the <User Name> field.
2. Enter your password in the <Password> field.
3. Click [Sign in].

Wi-Fi Connection

Camera Configuration:

1. Connect the OTG adapter (5-pin) and the Wi-Fi dongle to the Micro USB terminal.

Configuration with Smartphone:

1. Install the Wisenet Installation application.
2. Select the camera's SSID after turning on the Wi-Fi.
3. Launch the Wisenet Installation application.
4. Once connected to the camera, the video feed will activate. The video will play even if you are not connected during the initial setup.
5. You can adjust the viewing angle by watching the video on your smartphone.

Distributors in Turkey

EDS Elektronik Destek Sanayi ve Ticaret Ltd. Şti.
Meclis Mah. Teraziler Cad. Hayran Sk. (Eskisi Kılıç Sk.) No: 4 Sancaktepe / İstanbul / Türkiye
Tel: +90.216.313.25.15, Fax: +90.216.528.45.98

Koyuncu Elektronik Bilgi İşlem Sistemleri San. ve Dış. Tic. A.Ş.
Emek Mah. Ordu Cad. No:18 Sancaktepe / İstanbul / Türkiye
Tel: +90.216.528.88.88, Fax: +90.216.313.18.18

NFS Teknoloji ve Otomasyon Sistemleri San. Ve Tic. Ltd. Sti.
Cumhuriyet Mah Şair M.Akif Ersoy Sk. No:36 Üsküdar / İstanbul / Türkiye
Tel: +90.216.505.82.28, Fax: +90.216.505.82.29

Sensonet Teknoloji Elekt. ve Biliş. Hiz. San. ve Tic. Ltd. Şti.
Ramazanoğlu Mah. Transtek Cad. No: 2 Pendik / İstanbul / Türkiye
Tel: +90.216.999.49.49, Fax: +90.212.381.61.02

ENTES ELEKTRONİK CİHAZLAR İMALAT VE TİC. A.Ş.
Dudullu Org.San. Bölg. 1. Cad. No:23 34776 Ümraniye - İstanbul / Türkiye
Tel: +90.216.313.01.10, Fax: +90.216.314.16.15

The average lifespan of the device recommended by the Ministry of Trade is similar to the declaration of conformity with EEE regulations.

Regulatory Information

EAC Mark: Indicates compliance with Eurasian Economic Union technical regulations.

Service Life: 7 years.

Usage: For use as intended under normal conditions.