HYUNDAI Bluetooth Wake Up Light - Sunrise

Getting Started

• Remove the product from the box.
• Please retain all packaging until you have checked and counted all the parts and the contents against the parts list.

Packaging Contents

• Sunrise Alarm Clock Radio with LED Display
• Desktop Stand
• USB Cable
• Instruction Manual

Features

• Sunrise Alarm Clock Radio with LED Display
• Sunrise simulation - wake-up light gradually brightens up to bring you out of deep sleep, refreshed & ready for a new day!
• Sunset simulation - fall asleep with sunset! The light will gradually darken & automatically turn off in 30/60/90mins
• 12 nature sounds as alarm sound ?
• Tap to snooze to get additional sleep ?
• 12/24 hour time format
• 7 color light ?, 1x5W speaker ?
• USB powered; USB cable included ?

Important Safety Information ⚠️

• Read all instructions before using this product.
• Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.
• Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician.
• Improper repairs may place the user at serious risk.
• Do not use the unit with wet hands.
• Do not put objects into any of the openings.
• Keep the unit free from dust, lint etc.
• Do not use this unit for anything other than its intended use.
• Keep the unit out of reach of children.
• This product is not a toy.

Description of Parts

The device has several labeled parts:

Instructions for Use

Charging Instructions

• Connect the included USB Cable to the device's USB 5V DC Input Port (15).
• Connect the other end to a computer USB port or any other suitable USB power source.
• A red LED light will turn on while the device is charging.
• It takes 4-5 hours for the device to fully charge.
• When fully charged, the LED light will turn off.

Shutdown State

Press any button in shutdown state, the time will display for around 10 seconds.

Turning On/Off the Device

Press and hold the On/Off/Mode Button (9) for 2-3 seconds to turn the device on or off.

Clock Setting

After turning on the device, it will display the time and enter Bluetooth mode.

Setting the Clock Time

1. Short press the Clock Setting Button (2). The hour indication starts to blink. Adjust the hour using the ⬇️ / ⏩ buttons. Press ⏰ to confirm the hour setting; the minute indication will start to blink.
2. Press ⬇️ / ⏩ to set the minute. Press ⏰ to confirm the clock time. The setting will be cancelled if there is no action for about 10 seconds.

   Note: You can long press the ⬇️ / ⏩ buttons to move the numbers faster.

3. Long press the Clock Setting Button (2) to toggle between 12-hour or 24-hour clock display.

Light Settings

1. Press the LED Light Button (5) to turn on the warm white light. You can adjust the warm white light intensity by pressing ⬇️ / ⬆️ immediately.
2. Press the LED Light Button (5) again to enter automatic color changing mode and use it as a mood light. You can also press ? immediately to select a specific color from Red, Green, Blue, Pink, Yellow, and Light Blue.
3. Press the LED Light Button (5) a third time to turn off the light.

Setting the Alarm Time

1. Short press the Alarm Clock Setting Button (3). The hour indication starts to blink. Adjust the hour using the ⬇️ / ⏩ buttons. Press ⏰ to confirm the hour setting; the minute indication will start to blink. Press ⬇️ / ⬆️ until your desired minute is displayed, then press ⏰ to confirm the clock time. The setting will be cancelled if no action is taken for around 10 seconds.

   Note: You can long press the ⬇️ / ⬆️ buttons to move the numbers faster.

2. One of the 12 natural sounds will be heard, and its corresponding number will show on the display screen. Short press ⬇️ / ⬆️ to select your desired alarm sound. Press ⏰ to confirm the alarm time with that sound. The alarm symbol (?) will appear on the display.
3. Press and hold the Alarm Clock Setting Button (3) for 2 seconds to switch the alarm on or off. The alarm symbol (?) appears on the display when the alarm is switched on and disappears when it is switched off.

Sunrise Simulation Wake-Up Light, Alarm and Snooze

A. To enjoy Sunrise Simulation: Turn on the unit and ensure that the color light is turned off.

1. Sunrise simulation is on by default.
2. 30 minutes before the alarm time, the sunrise light will begin to turn on, gradually brightening from 0% to 100% by the alarm time, preparing your body for waking up.
3. At alarm time, the wake-up sound will play for 3 minutes.
4. When the wake-up alarm is heard, you can press ? to enter snooze mode. 9 minutes later, the warm white light will turn on again, and the wake-up sound will play again for 3 minutes. You can continue to press snooze, and after 9 minutes, the alarm will ring again.
5. If you do not stop the alarm, the wake-up light turns on and the alarm stops.

B. To enjoy Sunrise Simulation: Turn on the unit and ensure that the color light is turned off.

1. At alarm time, the warm white light will turn on and the wake-up sound will play for 3 minutes.
2. When the wake-up alarm is heard, you can press ? to enter snooze mode. 9 minutes later, the warm white light will turn on again, and the wake-up sound will play again for 3 minutes. You can continue to press snooze, and after 9 minutes, the alarm will ring again.
3. If you do not stop the alarm, the unit will return to the off state.

Sunset Simulation Sleep Light

Short press the Sleep Lamp Mode button (8) each time to select the timer of 30/60/90 minutes. After the desired timer is set, the lights will gradually lower brightness until the set timer is reached, and the lights will finally turn off completely. Bluetooth playing music or FM radio will also turn off at the same time at the end of the timer.

Bluetooth Operation

Pairing with Bluetooth Devices (Phone or Music Device)

1. Turn on the unit. It will enter Bluetooth mode, or press the Mode Button (9) repeatedly until Bluetooth mode is selected. The LED display will show "Lod" and then "bt", and an indication tone will be heard.
2. Place the speaker and Bluetooth device (phone or music device) not further than 3 feet (approx. 1 meter) apart from each other.
3. Activate the Bluetooth function on your Bluetooth device (phone or music device). Refer to the manufacturer's instructions for details on enabling Bluetooth on your device.
4. Once Bluetooth is activated on your device, select the unit "00000000" from the list of available Bluetooth devices.
5. If required, enter the password '0000' to confirm and finalize pairing.
6. Once paired successfully, an indication tone will be heard.
7. You can now start to use the speaker.
8. Press ⏪ / ⏩ to go to the previous / next track.
9. Press ▶️ / ⏸️ to play/pause the music.
10. You can decrease/increase the volume level by long pressing ⬇️ / ⬆️.
11. If pairing is unsuccessful, repeat the above steps.

FM Radio

1. Press the Mode Button (9) each time until FM mode is selected. The LED display will show an FM radio frequency with sound.
2. Insert the included USB cable into the USB 5V DC Input Port (15) of the device, and leave the other end of the cable open. This cable serves as an FM antenna for better reception.
3. Short press the Play/Pause Button (7) for searching and recording all radio stations within the frequency range 87.5-108MHz.
4. Press ⏪ / ⏩ to skip FM Radio stations.
5. You can decrease/increase the volume level by long pressing ⬇️ / ⬆️.

Tips!!

Press the Mode Button (9) to switch between different functions of the speaker. The modes appear in the following sequence: Bluetooth ? / FM Radio ? / Nature Sound ?.

Technical Specifications

Troubleshooting

Care and Maintenance

Clean the unit with a soft, damp cloth. Never use chemicals or hard abrasives. Keep this unit away from wet or damp surroundings.