Costway 3 Pieces Wicker Bistro Sofa Set

Contact Us!

Do NOT return this item. Contact our friendly customer service department for help first.

Email: US: cs.us@costway.com | UK: cs.uk@costway.com

Before You Start

• Read each step carefully before starting. It is very important to ensure each step is followed in the correct order, otherwise assembly difficulties may occur.
• Most of the board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included.
• Work in a spacious area, preferably on a carpet close to where the unit will be used.
• Keep the hand tools close at hand. Do not use power tools to assemble your furniture. They may scratch or damage the parts.

Hardware is included inside the packaging.

Parts List

Chair Components (x2)

• A: Side Panel (2 pcs)
• B: Side Panel (2 pcs)
• C: Back Panel (2 pcs)
• D: Seat Panel (2 pcs)
• E: Front Panel (2 pcs)
• F: Cushion (2 pcs)

Table Components

• G: Table Top (1 pc)
• H: Side Panel (2 pcs)
• I: Bottom Panel (1 pc)
• J: Side Panel (2 pcs)
• K: Table Top (1 pc)

Hardware

• 1: M6 x 25 mm (20 pcs)
• 2: M6 x 70 mm (8 pcs)
• 3: M6 x 55 mm (12 pcs)
• 4: Ø6 x 14 mm (44 pcs)
• 5: M6 x 30 mm (12 pcs)
• 6: M6 x 30 mm (16 pcs)
• 7: Allen key 4 x 98 (2 pcs)

Assembly Instructions

Step 1 (x2)

Attach part 2 and part 4 to part A and part C.

Step 2 (x2)

Attach part 2 and part 4 to part B and part C.

Step 3 (x2)

Connect parts A, B, and C using parts 1 and 4.

Step 4 (x2)

Attach part E to the assembled chair frame using parts 4.

Step 5 (x2)

Attach part E to the assembled chair frame using parts 1 and 4.

Step 6 (x2)

Attach part B to the frame using parts 3 and 5.

Step 7 (x2)

Place cushion F onto the assembled chair.

Step 8 (x2)

Assemble the table base by connecting parts H, I, and J using parts 4 and 6.

Step 9

Continue assembling the table base using parts 4 and 6.

Step 10

Continue assembling the table base using parts 4 and 6.

Step 11

Continue assembling the table base using parts 4 and 6.

Step 12

Continue assembling the table base using parts 4 and 6.

Step 13

Secure the table structure using parts 3 and 5.

Step 14

Place table top K onto the assembled table base.

Care and Maintenance

• Use a soft, clean cloth that will not scratch the surface when dusting.
• Use of furniture polish is not necessary.
• Should you choose to use polish, test first in an inconspicuous area.
• Using solvents of any kind on your furniture may damage the finish.
• Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
• Check bolts/screws periodically and tighten them if necessary.

Further advice about wood furniture care

Please protect your outdoor furniture with a cover when not in use since long-term sunlight exposure will result in damage to the surface.

In addition to sunlight damage, wood and metal frames suffer when exposed to extremes in temperature and humidity.

Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.

Welcome to our website and purchase our quality products!

With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!

US office: Fontana, California
UK office: Ipswich

5 Star Rating

We would like to extend our heartfelt thanks to all of our customers for taking time to assemble this product and giving us valuable feedbacks.

THANK YOU